• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 춘계학술대회 논문집
• /
• pp.119-122
• /
• 2005

In this study, the design simulation for optimal wire batch around service line was made to improve the dielectric strength at the primary winding using Finite Element Method. The automatic convergence algorithm for finding of limit object value using loop circulation method was developed to make the optimal design simulator. The modulation method was suggested to make division time faster which was very important for full simulation efficiency. As a result, the simulation time was reduced and the optimal wire batch design was obtained.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2008년도 춘계학술대회 논문집
• /
• pp.252-255
• /
• 2008

We conduct finite element simulation of a cross-wedge rolling process using AFDEX 3D. The die is realistically modeled with emphasis on the hatched plicate over the slope or forming region. Coulomb frictional law is used to prevent slip between material and die. Constant shear frictional law is also investigated and it is esmphasized that the constant shear frictional law is improper for cross-wedge rolling simulation.

• Nuclear Engineering and Technology
• /
• 제53권3호
• /
• pp.932-941
• /
• 2021

This paper suggests a fracture simulation method for SFR metallic fuel pin under accident condition. Two major failure mechanisms - creep damage and eutectic penetration - are implemented in the suggested method. To simulate damaged element, stress-reduction concept to reduce stiffness of the damaged element is applied. Using the proposed method, the failure size of cladding can be predicted in addition to the failure time and failure site. To verify the suggested method, Whole-pin furnace (WPF) test and TREAT-M test conducted at Argonne National Laboratory (ANL) are simulated. In all cases, predicted results and experimental results are overall in good agreement. Based on the simulation result, the effect of eutectic-penetration depth representing failure behavior on failure size is studied.

• Composites Research
• /
• 제34권6호
• /
• pp.337-344
• /
• 2021

본 연구에서는 복합재료 팬 블레이드 도브테일 요소의 인장하중에 따른 점진적 파손거동을 유한요소 시뮬레이션을 통한 수치적 연구를 수행하고, 인장시험을 통하여 정확도를 검증한다. 도브테일 요소는 터보 팬 엔진의 팬 블레이드를 디스크와 결합시키는 조인트의 하나로, 통상 티타늄 등의 금속 재료로 제작되나 경량화 등의 이유로 복합재료의 적용이 연구되고 있다. 하지만 복합재료를 이용한 팬 블레이드 제조과정에서 드롭오프 플라이(Drop-off ply), 수지 포켓(resin pocket) 등의 제조 결함이 필연적으로 발생한다. 이러한 제조 결함이 복합재료 팬 블레이드 도브테일 요소에 미치는 영향을 확인하기 위해 유한요소모델을 이용한 수치해석을 수행하여 예측 결과와 인장시험 결과를 비교 분석한다. 이때 층간분리(delamination) 거동을 모사 가능한 응집영역 모델을 적용하였다. 결론적으로, 열 잔류응력 및 두께방향 압축하중에 의한 계면 물성 강화 효과를 고려하여 유한요소 해석결과와 시험결과 간의 높은 상사성을 얻을 수 있었다.

• Structural Engineering and Mechanics
• /
• 제26권1호
• /
• pp.31-42
• /
• 2007

The unsymmetric finite element formulation has been proposed recently to improve predictions from distorted finite elements. Studies have also shown that this special formulation using parametric functions for the test functions and metric functions for the trial functions works surprisingly well because the former satisfy the continuity conditions while the latter ensure that the stress representation during finite element computation can retrieve in a best-fit manner, the actual variation of stress in the metric space. However, a question that remained was whether the unsymmetric formulation was variationally correct. Here we determine that it is not, using the simplest possible element to amplify the principles.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2002년도 춘계학술대회 논문집
• /
• pp.103-107
• /
• 2002

The 2nd forming process of flanging/hemming has recently many interest because it determines external quality of automobile. It is difficult to apply finite element simulation in flanging/hemming due to small element size which needs for expression of bending effect on the die corner and big model size of side door, back door, tank lid and like opening Parts. This paper shows the process of flanging/hemming simulation using finite element model for automotive panels. The explicit finite element program PAM-STAMP$\^$TM/ was used to simulate the flanging and hemming operations.

• Journal of Electrical Engineering and Technology
• /
• 제6권3호
• /
• pp.342-349
• /
• 2011

This paper presents a study on rotor asymmetry caused by broken bars and its effects on the stator current of an induction machine under an unbalanced supply voltage. The simulation of the induction machine is based on the finite element method. In the early stage of diagnosis, we show new sidebands specific to the partial rupture of the rotor bar. Experimental tests corroborate with the simulation results.

• 소성∙가공
• /
• 제9권2호
• /
• pp.159-164
• /
• 2000

In this paper, a computer simulation technique for the forging process having a floating die is presented. The penalty rigid-plastic finite element method is employed together with an iteratively force-balancing method, in which the convergence is achieved when the floating die part is in force equilibrium within the user-specified tolerance. The force balance is controled by adjusting the velocity of the floating die in an automatic manner. An application example of a three-stage cold forging process is given.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.262-263
• /
• 2006

The free sintering of metallic powders blended with non sintering inclusions is investigated by the Discrete Element Method (DEM). Each particle, whatever its nature (metallic or inclusion) is modeled as a sphere that interacts with its neighbors. We investigate the retarding effect of the inclusions on the sintering kinetics. Also, we present a simple coarsening model for the metallic particles, which allows large particles to grow at the expense of the smallest.

• 한국시뮬레이션학회:학술대회논문집
• /
• 한국시뮬레이션학회 2001년도 The Seoul International Simulation Conference
• /
• pp.205-208
• /
• 2001

A lumped electrical circuit is an approximate representation of the field within a curtain frequency range. The finite element modelling is a synonym of the equivalent circuit. The electric conduction field and electric potential wave field have been modelled by an admittance network and an LC low-pass filter network. Here in the present paper, the equivalent magnetic circuit representation is created for a magnetostatic field by the finite element modelling in two dimension.