• Composites Research
• /
• 제26권1호
• /
• pp.72-78
• /
• 2013

불연속 탄소섬유-에폭시 복합재의 저항발열 특성에 관한 연구를 수행하였다. 1, 3, 5 wt.% 불연속 탄소섬유가 함유된 복합재 시험편을 초음파 처리와 캐스트 몰딩(cast molding)을 이용하여 제조하였다. 시편에 DC 전류 인가시 발생되는 저항열에 의한 시편의 표면온도 변화를 적외선 카메라를 이용하여 측정하였다. 발열온도를 예측하기 위해서 유한요소해석을 수행하였는데, 실측된 온도와 부합함을 확인하였다. 탄소섬유의 함량과 인가전압이 증가할수록 발열저항에 의해서 발생된 열은 증가함을 확인하였다. 복합재 내에서 균일한 온도분포를 얻기 위해서는 탄소섬유의 분산상태가 중요하며, 대기온과 습도 등 실험환경이 발열온도에 영향을 미치는 것으로 나타났다.

• 한국수자원학회논문집
• /
• 제31권1호
• /
• pp.85-93
• /
• 1998

본 연구는 도시하천인 한강 하류부에 2차원 유한요소모형을 적용하여 하천의 수리학적 특성에 따른 오염물질의 거동특성을 모의하고 예측하기 위한 것으로서 흐름상태를 분석할 수 있는 RMA-2V 모형과 동적 수질예측이 가능한 RMA-4모형을 이용하였다. 2차원 유한요소모형을 사용하여 수질의 거동특성을 모의하여 본 결과 유량 및 유속의 변화는 오염물질의 이송확산에 큰 영향을 미치는 것으로 나타났으며, 탄천 및 중랑천은 대상구역내의 수질오염에 큰 영향을 미치는 것으로 나타났다. 불시의 오염사고가 발생했을 때 오염물질이 하류부로 이동함에 따라 최대 COD 값은 감소하고,오염물질이 영향을 미치는 지속기간은 커지는 것을 알 수 있었고, 전체적으로 좌·우안의 오염물질의 농도차가 크게 나타났으며, 이로써 한강과 같은 대하천의 경우 실시간 예측시 2차원 해석이 필요한 것으로 나타났다.

• 한국전산구조공학회논문집
• /
• 제21권1호
• /
• pp.13-20
• /
• 2008

기능경사 소재(FGM)에는 서로 다른 두 가지 구성입자들이 혼합되어 있는 경사층(graded layer)이 삽입되어, 소재 전 영역에 걸쳐 구성입자의 체적분율이 연속적이고 기능적으로 변화하도록 되어있다. 이러한 이상(dual-phase) 입자복합재의 열 기계적 거동을 해석함에 있어 필수적인 경사층의 물성치는 전통적으로 균질화 기법을 이용하여 예측되었다. 하지만, 이러한 균질화 기법은 구성입자의 형태, 분산구조 등과 같은 상세 형상을 반영하지 못하지 때문에 복합재의 총체적인 등가 물성치 예측에만 국한 되어왔다. 이러한 맥락에서 본 연구에서는 경사층을 미시역학적으로 이산화 모델링하고, 다양한 체적분율과 외부 하중조건에 대해 유한요소해석을 실시하여 이러한 균질화 기법들의 특성을 분석하였다.

• Geomechanics and Engineering
• /
• 제2권2호
• /
• pp.141-156
• /
• 2010

In the framework of meshfree methods, a new methodology is developed based on radial point interpolation method (RPIM). This methodology is applied to a one-dimensional contaminant transport modelling in the saturated porous media. The one-dimensional form of advection-dispersion equation involving reactive contaminant is considered in the analysis. The Galerkin weak form of the governing equation is formulated using 1D meshfree shape functions constructed using thin plate spline radial basis functions. MATLAB code is developed to obtain the numerical solution. Numerical examples representing various phenomena, which occur during migration of contaminants, are presented to illustrate the applicability of the proposed method and the results are compared with those obtained from the analytical and finite element solutions. The proposed RPIM has generated results with no oscillations and they are insensitive to Peclet constraints. In order to test the practical applicability and performance of the RPIM, three case studies of contaminant transport through the landfill liners are presented. A good agreement is obtained between the results of the RPIM and the field investigation data.

• Steel and Composite Structures
• /
• 제35권5호
• /
• pp.659-670
• /
• 2020

This paper proposes the use of a porous core between layers of laminated composite plates to examine its effect on the natural frequencies of the resulted porous laminated composite sandwich plate (PLCSP) resting on a two-parameter elastic foundation. Moreover, it has been suggested that the dispersion of porosity has two different functionally graded (FG) patterns which are compared with a uniformly dispersed (UD) profile to find their best vibrational efficiency in the proposed PLCSPs. In FG patterns, two types of dispersions, including symmetric (FG-S) and asymmetric (FG-A) patterns have been considered. To derive the governing Eigen value equation of such structures, the first order shear deformation theory (FSDT) of plates has been employed. Accordingly, a finite element method (FEM) is developed to solve the derived Eigen value equation. Using the mentioned theory and method, the effects of porosity parameters, fiber orientation of laminated composite, geometrical dimensions, boundary conditions and elastic foundation on the natural frequencies of the proposed PLCSPs have been studied. It is observed that embedding porosity in core layer leads to a significant improvement in the natural frequencies of PLCSPs. Moreover, the natural frequencies of PLCSPs with FG porous core are higher than those with UD porous core.

• Design & Manufacturing
• /
• 제2권5호
• /
• pp.1-4
• /
• 2008

LCD-BLU (Liquid Crystal Display - Back Light Unit) is one of kernel parts of LCD unit and it consists of several optical sheets(such as prism, diffuser and protector sheets), LCP (Light Guide Plate), light source (CCFL or LED) and mold frame. The LGP of LCD-BLU is usually manufactured by forming numerous dots with $50-200{\mu}m$ in diameter on it by erosion method. But the surface of the erosion dots of LGP is very rough due to the characteristics of the erosion process during the mold fabrication, so that its light loss is high along with the dispersion of light into the surface. Accordingly, there is a limit in raising the luminance of LCD-BLU. Especially, the negative and positive micro-lens pattern fabricated by modified LiGA with thermal reflow process was applied to the optical design of LGP.

• 방사성폐기물학회지
• /
• 제3권1호
• /
• pp.9-16
• /
• 2005

To evaluate parameters influencing on the dust removal of the High Temperature Filter(HTF) system, a computer simulation of fluid dynamics inside the system had been performed. The results showed that the optimum pulse jet periods were 50ms and 90ms for the 1000mm and 1500mm long filter elements respectively. Dust removal effect was very excellent under the pulse jet pressure of 3 bar. But the distance between the pulse jet nozzle and the venturi of a filter element had no meaningful effect on the performance with the variation from 5mm to 10mm. Compared to the dispersion mode of pulse jet, the collective mode of pulse jet flow was preferable in maintaining the pressure inside the system stable.

• 천문학논총
• /
• 제28권3호
• /
• pp.75-82
• /
• 2013

An optical grism for education is fabricated and tested. It is composed of a transmission grating as dispersion element and a prism as diffraction angle compensation device. The transmission grating is Edmundoptics #49-584(spatial frequency 600 lines/mm, dimension $50mm{\times}50mm$). The prism is the fused silica type with angles ($41.3^{\circ}$, $-48.7^{\circ}$, $-90^{\circ}$). The grism device is fabricated by bonding the transmission grating and the prism with an optical adhesive. The zig for assembling the grism, telescope and camera is composed of an aluminum tube, an aluminum disk ring and a T-ring camera adaptor. The fabricated optical grism spectrograph is tested in laboratory using Halogen lamp and Neon lamp with DSLR camera. And the grism assembled with reflector telescope is tested in a field using stellar light. The results show good agreements with design parameters. The wavelength coverage range of the grism is 250 nm at the un-deviated wavelength of 506 nm. The wavelength resolution is 0.11 nm/pixel.

• 한국정밀공학회지
• /
• 제30권5호
• /
• pp.544-551
• /
• 2013

Recently high speed mixer, which is mixing, grinding, dispersion for liquid-liquid material, has been widely used several industries such as food, cosmetics, pharmaceuticals, fine chemicals, electronic material. This high speed mixer has a core element part called particle separation device. Particle separation device, which makes mixed liquid and liquid material using shear forces from a rotor and a stator, is a decisive factor in the distributed parts. In this study, we examined the velocity distribution of the two models of particle separation device using computation fluid dynamics, so that we were able to see the difference of the velocity distribution according to the shape. Also, by experiment, we observed that the use of rotor-screen type is deemed more suitable in case of accurately considering the effect of improving of the dispersibility through the circulation of the future.

• Structural Engineering and Mechanics
• /
• 제65권6호
• /
• pp.645-656
• /
• 2018

Importance of procuring adequate knowledge about the mechanical behavior of double-layered graphene sheets (DLGSs) incensed the authors to investigate wave propagation responses of mentioned element while rested on a visco-Pasternak medium under hygro-thermal loading. A nonlocal strain gradient theory (NSGT) is exploited to present a more reliable size-dependent mechanical analysis by capturing both softening and hardening effects of small scale. Furthermore, in the framework of a classical plate theory the kinematic relations are developed. Incorporating kinematic relations with the definition of Hamilton's principle, the Euler-Lagrange equations of each of the layers are derived separately. Afterwards, combining Euler-Lagrange equations with those of the NSGT the nonlocal governing equations are written in terms of displacement fields. Interaction of the each of the graphene sheets with another one is regarded by the means of vdW model. Then, a widespread analytical solution is employed to solve the derived equations and obtain wave frequency values. Subsequently, influence of each participant variable containing nonlocal parameter, length scale parameter, foundation parameters, temperature gradient and moisture concentration is studied by plotting various figures.