• Transactions on Electrical and Electronic Materials
• /
• 제10권4호
• /
• pp.131-134
• /
• 2009

The electrical properties and the microstructure of nitrogen-doped poly 3C-SiC films used for micro thermal sensors were studied according to different thicknesses. Poly 3C-SiC films were deposited by LPCVD (low pressure chemical vapor deposition) at $900^{\circ}C$ with a pressure of 4 torr using $SiH_2Cl_2$ (100%, 35 sccm) and $C_2H_2$ (5% in $H_2$, 180 sccm) as the Si and C precursors, and $NH_3$ (5% in $H_2$, 64 sccm) as the dopant source gas. The resistivity of the poly SiC films with a 1,530 ${\AA}$ thickness was 32.7 ${\Omega}-cm$ and decreased to 0.0129 ${\Omega}-cm$ at 16,963 ${\AA}$. The measurement of the resistance variations at different thicknesses were carried out within the $25^{\circ}C$ to $350^{\circ}C$ temperature range. While the size of the resistance variation decreased when the films thickness increased, the linearity of the resistance variation improved. Micro heaters and RTD sensors were fabricated on a $Si_3N_4$ membrane by using poly 3C-SiC with a 1um thickness using a surface MEMS process. The heating temperature of the SiC micro heater, fabricated on 250 ${\mu}m$${\times}$250 ${\mu}m$ $Si_3N_4$ membrane was $410^{\circ}C$ at an 80 mW input power. These 3C-SiC heaters and RTD sensors, fabricated by surface MEMS, have a low power consumption and deliver a good long term stability for the various thermal sensors requiring thermal stability.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.299-302
• /
• 2001

In this study, we are studied the electrical conduction and dielectric breakdown properties of insulating varnish. In order to analyze the molecular structure and physical properties of insulating varnishs, FT-lR was used. As the result, it can be confirmed that the peak of alcoholic group appeared in wavenumbers 3452[cm$\^$-1], the peak of =CH appeared in 3080[cm$\^$-1] and the peak of -CH appeared in 2919[cm$\^$-1] respectively. The following results were obtained from electrical properties of insulating varnish. The amplitude of current density was decreased by thickness increasing and the current density was effected by the thermal energy from external due to temperature increasing. In study temperature dependence of dielectric strength, the specimen of 10[$\mu\textrm{m}$] thickness was measurement from room temperature to 180[$^{\circ}C$]. It is confirmed that the temperature regions below 60[$^{\circ}C$] is due to electron avalanche breakdown and the temperature regions over 60[$^{\circ}C$] is due to free volume breakdown which makes electron movements easy.

• 한국전기전자재료학회논문지
• /
• 제16권12호
• /
• pp.1071-1076
• /
• 2003

The nonlinear properties and their stability of ZPCCD- based varistors, which are composed of ZnO P $r_{6}$ $O_{ll}$ - CoO-C $r_2$ $O_3$-D $y_2$ $O_3$-based ceramics, were investigated in the D $y_2$ $O_3$ content range of 0.0∼2.0 mol%. The incorporation of D $y_2$ $O_3$ greatly affected the nonlinear properties and the best nonlinearity was obtained from 0.5 mol% D $y_2$ $O_3$ with nonlinear exponent of 66.6 and leakage current of 1.2 $\mu$A. Further addition of D $y_2$ $O_3$ deteriorated the nonlinear properties. In stability against DC accelerated aging stress state: 0.95 $V_{1mA}$/15$0^{\circ}C$/24 h, the 0.5 mol％ D $y_2$ $O_3$-doped varistor exhibited the highest stability, in which the variation rate of varistor voltage and nonlinear exponent are -1.9% and 10.5%, respectively. The remainder varistors resulted in thermal runaway due to low density of ceramics.s.s.

• 한국전자통신학회논문지
• /
• 제16권2호
• /
• pp.233-240
• /
• 2021

다양한 함량으로 네오디뮴이 도핑된 황화아연 박막제작은 RF 마그네트론 스퍼터링 장비를 이용하여 황화아연과 네오디뮴을 동시 증착하여 박막을 제작하였고, 후처리 공정으로 급속열처리를 400℃ 에서 30분간 실시하였다. 다양한 네오디뮴의 도핑 함량(0.35at.%, 1.31at.%, 1.82at.% 및 1.90at.%)을 갖는 ZnS 박막의 구조, 형태, 광학적 특성을 연구하였다. X-선 회절 패턴은 모든 박막에서 (111)방향의 큐빅 구조로 성장하였다. SEM 이미지와 AFM 이미지를 통해 네오디뮴 도핑 함량에 의한 박막의 표면 및 구조적 형태에 대하여 설명하였다. EDAX를 통해 다른 불순물이 포함되지 않은 Zn, S 및 Nd의 원소만을 확인하였다. UV-vis 스펙트럼을 이용하여 제작된 박막의 투과율과 밴드갭을 확인하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 춘계학술대회 논문집 디스플레이 광소자 분야
• /
• pp.127-130
• /
• 2005

The properties of phosphorus doped ZnO multilayer thin films deposited on (001) sapphire substrates by pulsed laser deposition (PLD) were investigated by using annealing treatment at various annealing temperature after deposition. The phosphorus doped ZnO multilayer was composed of phosphorus doped ZnO layer and two pure ZnO layers on sapphire substrate. The structural. electrical and optical properties of the ZnOthin films were measured by X-ray diffraction (XRD). Hall measurements and photoluminescence (PL). As the annealing temperature optimized. the electrical properties of the ZnO multilayer showed a electron concentration of $1.56{\times}10^{16}/cm^3$, a resistivity of 17.97 ${\Omega}cm$. It was observed the electrical property of the film was changed by dopant activation effect as thermal annealing process

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회B
• /
• pp.2381-2384
• /
• 2008

The heat exchange between the Borehole Heat Exchanger(BHE) and the surrounding ground depends directly on ground thermal conductivity k at the certain site. The k is thus a key parameter in designing BHE and coupled geothermal heat pump systems. Currently, although a thermal hydraulic Response Test(TRT) is mostly used in practice, the thermal hydraulic TRT needs additional power and is generally time-consuming. A new, simple wireless probe for hi-speed k determination was introduced in this paper. This technique using a wireless probe is less time-consuming and requires no external source of energy for measurement and predicts local thermal properties by measuring soil temperatures along the depth. Measured temperature data along the depth was analyzed. As a result, the electronic wireless probe can replace the conventional hydraulic TRT method after carrying out the additional research on a lot of local heat flow, etc.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집 Vol.14 No.1
• /
• pp.34-37
• /
• 2001

In this study, the capacitance-voltage properties of $(Sr_{1-x}\cdot Ca_x)TiO_3(0.05{\leq}x{\leq}0.20)$-based grain boundary layer ceramics were investigated. The ceramics were fabricated by the conventional mixed oxide method. The sintering temperature and time were $1480\sim1500^{\circ}C$ and 4 hours. respectively. The 2nd phase formed by the thermal diffusion of CuO from the surface leads to very excellent dielectric properties, that is, ${\varepsilon}_r$ >50000, tan$\delta$ <0.05, ${\Delta}C$ < ${\pm}10%.$ The capacitance is almost unchanged below about 20[V] but it decreases slowly about 20[V]. The results of the capacitance-voltage properties indicated that the grain boundary was composed of the continuous insulating layers.

• 한국전자통신학회논문지
• /
• 제15권4호
• /
• pp.665-670
• /
• 2020

CIGS 박막 태양 전지의 버퍼층은 흡수층과 윈도우층 사이의 밴드정렬(band alignment)을 통해 에너지 변환 효율을 향상시킨다. ZnS는 무독성의 II-VI 반도체 화합물로서 직접천이형 광대역 밴드갭과 n형 전도성을 가지며, 높은 광투과성, 높은 굴절률 등의 우수한 전기적, 광학적 특성을 가지고 있고, 우수한 격자정합을 가지는 물질이다. 이 연구에서, RF 마그네트론 스퍼터링 방법에 의해 증착 후 급속 열처리에 의해 제작된 ZnS 버퍼층 박막의 구조적, 광학적 특성의 상관관계에 대해 고찰하였다. (111), (220), (311) 면의 섬아연광 입방정 구조를 확인할 수 있고, 상대적으로 저온에서 급속열처리를 수행한 시료에서는 (002) 면의 우르쯔광 육방정 구조가 함께 나타나는 다결정이 되었다. 고온에서 급속열처리 수행한 시료에서는 섬아연광 입방정 구조의 단결정으로 상전이 된다. 화학적 성분 분석을 통해서 Zn/S의 비율이 화학양론에 근접한 시료에서 섬아연광 입방정 구조의 단결정이 나타났음을 확인하였다 급속열처리 온도가 증가할수록 흡수단이 다소간 단파장 쪽으로 이동되고, 가시광 파장 범위에서 평균 광투과율이 증가하는 경향성을 보이며 500℃ 조건에서는 80.40%로 향상되었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.73-74
• /
• 2006

Carbon nanotubes (CNTs) have recently attracted great attention because of their excellent physical properties, such as high mechanical strength, thermal stability, and electronic properties. These useful properties of carbon nanotubes make themselves good candidates for various application field, such as a transistor, battery, field emission display, nanoscale inter-connects, and so on. Gas-phase techniques offer the unique ability to synthesize well-oriented arrays of CNTs. However, it is seldom reported that the pressure influences on the growth of CNTs under low substrate temperature. In this work, the effect of the working pressure and the influence of the catalyst preparation on the properties of CNTs grown by microwave plasma chemical vapor deposition (MPCVD) were investigated.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2011년도 추계학술발표대회
• /
• pp.25.1-25.1
• /
• 2011

Over the past few decades, metallic nanoparticles (NPs) have been of great interest due to their unique mesoscopic properties which distinguish them from those of bulk metals; such as lowered melting points, greater versatility that allows for more ease of processability, and tunable optical and mechanical properties. Due to these unique properties, potential opportunities are seen for applications that incorporate nanomaterials into optical and electronic devices. Specifically, the development of metallic NPs has gained significant interest within the electronics field and technological community as a whole. In this study, gold (Au) pads for surface finish in electronic package were developed by inkjet printing of Au NPs. The microstructures of inkjet-printed Au film were investigated by various thermal treatment conditions. The film showed the grain growth as well as bonding between NPs. The film became denser with pore elimination when NPs were sintered under gas flows of $N_2$-bubbled through formic acid ($FA/N_2$) and $N_2$, which resulted in improvement of electrical conductance. The resistivity of film was 4.79 ${\mu}{\Omega}$-cm, about twice of bulk value. From organic anlayses of FTIR, Raman spectroscopy, and TGA, the amount of organic residue in the film was 0.43% which meant considerable removal of the solvent or organic capping molecules. The solder ball shear test was adopted for solderability and shear strength value was 820 gf (1 gf=9.81 mN) on average. This shear strength is good enough to substitute the inkjet-printed Au nanoparticulate film for electroplating in electronic package.