• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
• /
• pp.215-216
• /
• 2007

Semiconducting layers are thin rubber film between electrical cable wire and insulating polymer layers having a volume resistivity of ${\sim}10^2{\Omega}cm$. A new semiconducting material was suggested in this study based on the carbon nanotube(CNT)-reinforced polymer nanocomposites. CNT-reinforced polymer nanocomposites were prepared by solution mixing with various polymer type and dual filler system. The mechanical, thermal and electrical properties were investigated as a function of polymer type and dual filler system based on CNT and carbon black. The volume resistivity of composites was strongly related with the crystallinity of polymer matrix. With decreased crystallinity, the volume resistivity decreased linearly until a critical point, and it remained constant with further decreasing the crystallinity. Dual filler system also affected the volume resistivity. The CNT-reinforced nanocomposite showed the lowest volume resistivity. When a small amount of carbon black(CB) was replaced the CNT, the crystallinity increased considerably leading to a higher volume resistivity.

• 한국전기전자재료학회논문지
• /
• 제22권3호
• /
• pp.210-217
• /
• 2009

Insulated methods of compact bus duct has been applied a way of coating Epoxy powder. The problem which is caused by degradation during operation is very important in severe environment. Therefore, this study compared and verified many kind of properties ; electrical breakdown by thermal and water aging, v-t characteristic, arc discharge, mechanical properties, bending test and cross cut. Sample D was stable before the $T_g$ to be about $7{\sim}10 %$ decrease in the breakdown test according to temperature change. In case of V-t and arc discharge, it had been kept up suitable characteristic. Also, in case of electrical and mechanical characteristic, both sample D and A have excellent capacity.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 추계학술대회 논문집
• /
• pp.244-244
• /
• 2009

Carbon nanotubes (CNTs) have excellent electrical, chemical stability, mechanical and thermal properties. In this paper, networks of Multi-walled carbon nanotube (MWCNT) materials were investigated as transparent electrode. Sensor films were fabricated by air spray method using the multi-walled CNTs solution on glass substrates. The film that was sprayed with the MWCNT dispersion for 60 sec, was 300nm thick. And the electric resistivity and the light transmittance rate are $2{\times}10^2{\Omega}cm$ and 60%, respectively.

• 마이크로전자및패키징학회지
• /
• 제11권4호
• /
• pp.49-53
• /
• 2004

고분자 재료가 전자산업분야에서 절연재료나 접착제로 널리 사용되고 있다. 실리콘 기판위에 증착된 고분자 층에는 기판과의 열팽창계수 차이로 인해 열응력이 발생할 수 있다 고분자 층과 기판사이의 열적 성질의 차이로 인해 큰 잔류응력이 야기된다. 본 연구에서는 레이저 주사법을 이용하여 열적변형으로 인한 곡률변화를 측정한 후, 해석적 방법을 적용하여 수정된 박막 물성을 구하는 방법을 제시하고 있다.

• Transactions on Electrical and Electronic Materials
• /
• 제12권4호
• /
• pp.160-163
• /
• 2011

Polymer nanocomposite has been attracting more attention as a new insulation material because homogeneous dispersion of nano-sized inorganic fillers can improve various properties significantly. In this paper, various kinds of epoxy-based nanocomposites were made, and the AC breakdown strengths of Nano filler and micro-$SiO_2$ filler mixtures of epoxy-based composites were analyzed using sphere-to-sphere electrodes. Moreover, nano- and microfiller combinations were investigated as an approach to practical application of nanocomposite insulation materials. Its composition ratio was 100 (resin):82 (hardener):1.5 (accelerator). AC breakdown tests were performed at room temperature ($25^{\circ}C$), $80^{\circ}C$, and $100^{\circ}C$ in the vicinity of $T_g$ ($90^{\circ}C$). Thermal conductivity was measured using TC-30.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.6-6
• /
• 2011

Graphene, a monlayer of carbon atoms arrange to form a 2-dimensional honeycomb lattice, exhibits enormous fascinating properties, such as a linear energy dispersion relation, a wide-range optical absorption, high thermal conductivity, and mechanical flexibility [1]. Because the unique material properties of graphene allow it to be a promising building block for the next generation electronic and optoelectronic devices, sometimes graphene-based devices have refereed to be a strong candidate to overcome the intrinsic limitations of conventional semiconductor-based technology [2,3]. However, there are several fundamental or technological hurdles to be overcome in real applications of graphene in electronics and optoelectronics. In this tutorial we will present a short introduction to the basic materials properties and recent progress in applications of graphene and discuss future outlook of graphene-based electronic and optoelectronic devices.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1996년도 추계학술대회 논문집
• /
• pp.421-424
• /
• 1996

Effects of humidity absorbing deterioration on AC dielectric breakdown characteristics of modified epoxy resin system with SN(succinonitrile) were investigated. As the forced humidity absorbing deterioration proceeded under high temperature and humidify, glass transition temperature increased. The dielectric breakdown strength increased and then decreased at deterioration cycles higher than 2. Not only, the increment of thermal stability but also, the physical detects such as Internal cracks and voids occurred during the humidity absorbing deterioration cycle were the main causes of the change in dielectric properties.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 추계학술대회 논문집
• /
• pp.449-452
• /
• 1999

NiSi were formed from either Ni monolayer or Ni/Ti bilayer and the SADS method was applied to fabricated PMOSFET with Ni-polycide gate electrodes. PMOSFET made from Ni monolayer showed thermal stability unto 300~40$0^{\circ}C$ for 600sec., and excellent C-V characteristics for long time of drive-in anneal than PMOSFET made from Ni/Ti bilayer. This was attributed to easier decomposition and subsequent Ni diffusion to SiO$_2$ layer, probably due to the presence of Ti unreducing process

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1996년도 춘계학술대회 논문집
• /
• pp.216-219
• /
• 1996

Polytetrafluoroethylene is very suitable for insulation materials because of it's high thermal and chemical stability, high electrical resistance and low loss factor. But almost all kinds of pure fluoroplastic cannot endure long time in the high temperature arc environment breaking high voltage and current In this study, inorganic materials such as BN, TiO$_2$ and Al$_2$O$_3$ were filled in the polytetrafluoroethylene to improve arc resistance. The electrical properties, arc resistant properties and light reflectance of the composites were investigated.

• 한국전기전자재료학회논문지
• /
• 제25권5호
• /
• pp.366-371
• /
• 2012

In this paper, fabricated by MEMS uncooled micro-bolometer detector for the study in the infrared sensitivity enhancement. Absorption layer SiOx-Metal series MDTF (metal-dielectric thin film) by high absorption rate and has a high thermal coefficient of resistance, low noise characteristics were implemented. Then MDTF were made in a vacuum deposition method. And MDTF for the analysis of the physical properties of silicon wafers were fabricated, TCR (temperature coefficient of resistance) value was made in order to measure the glass wafer and FT-IR (Fourier Transform Infrared spectroscopy) values were made in order to measure the germanium window. The analyzed results of MDTF -3 [%/K] has more characteristics of the TCR. And 8~12 um wavelength region close to 70% in the absorption characteristic.