• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.I
• /
• pp.705-709
• /
• 2005

In order to clarify the heat annealing process for Magnesium Oxide (MgO), cathodoluminescent (CL) analysis was performed. Our results in the present work prove that the heat annealing has effects on not only removing water from the surface of MgO, but also increasing density of O and Mg defect pairs. It is the first work that the influence of annealing process on physical properties of the vacuum evaporated MgO thin films by using CL spectra.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2002년도 금형가공 심포지엄
• /
• pp.26-33
• /
• 2002

Die Factory follows typical order adaptive manufacturing, and delaying delivery affects directly product development of customer, Manufacturing Management System is tried to comply with the appointed date of delivery. It acquires running signal from NC milling, calculates manufacturing results, and offers the basic data to manage the operation ratio. Thus it offers Production data necessary to accomplish the objective of progress improvement for Unmanned Manufacturing. Manufacturing Management System runs on Web Environment, and is composed of electronic work order, operation ratio data acquisition and totaling module.

• 한국전기전자재료학회논문지
• /
• 제19권6호
• /
• pp.563-567
• /
• 2006

Indium tin oxide (ITO) used as an electrode in organic light emitting diodes (OLEDs) and organic thin film transistors (OTFTs) was modified by a self-assembled monolayer (SAM). For device fabrication, surface of the ITO was modified by immersion in a solution including various phosphonic acid at room temperature in order to increase work function of an electrode. The work function of ITO with SAM was measured by Kelvin probe. Work function increase of 0.88 eV was observed in ITO with various SAM. Therefore, ohmic contact is achieved in an interface between ITO and organic semiconductors (pentacene). We analyzed the origin of work function increase of ITO with SAM by X-ray photoelectron spectroscopy. We confirmed that increase of oxygen bonding energy attributed to increase the work function of ITO. These results suggested that ITO with the SAM gives a high possibility for high performance of OLEDS and OTFTs.

• Journal of Electrical Engineering and Technology
• /
• 제8권6호
• /
• pp.1503-1511
• /
• 2013

This paper deals with the analysis of leakage current characteristics of silicone rubber insulator in order to develop a new condition monitoring tool to identify the flashover of outdoor insulators. In this work, laboratory based pollution performance tests are carried out on silicone rubber insulator under ac voltage at different pollution levels and relative humidity conditions with sodium chloride (NaCl) as a contaminant. Min-Norm spectral analysis is adopted to calculate the higher order harmonics and Signal Noise Ratio (SNR). Choi-Williams Distribution (CWD) function is employed to understand the time frequency characteristics of the leakage current signal. Reported results on silicone rubber insulators show that the flashover development process of outdoor polymer insulators could be identified from the higher order harmonics and signal noise ratio values of leakage current signals.

• Current Optics and Photonics
• /
• 제1권6호
• /
• pp.631-636
• /
• 2017

We firstly develop a straightforward method to generate full $Poincar{\acute{e}}$ beams with any polarization geometry over an arbitrary order $Poincar{\acute{e}}$ sphere. We implement this by coaxial superposition of two orthogonal circular polarized beams with alternative topological charges with the help of a Mach-Zehnder interferometer. Secondly we find the existence of singularity points. And the inner relationship between their characteristics and the order of $Poincar{\acute{e}}$ spheres is also studied. In summary, this work provides a convenient and effective way to generate vector beams and to control their polarization states.

• 화약ㆍ발파
• /
• 제32권1호
• /
• pp.23-30
• /
• 2014

국내 화약류에 대한 전반적인 관리와 발파작업에 대한 규정은 총포 도검 화약류등 단속법에 의하여 관리되고 있으나, 세부적인 취급과 사용법에 대한 지침은 산업안전보건법 제27조에 의거하여 발파작업 표준 안전작업지침을 마련하여 발파작업에서의 재해예방을 위한 화약류의 취급, 운반, 저장, 사용 및 관리와 작업상의 안전에 관하여 사업자에게 지도 권고하고 있다. 본 연구에서는 고용노동부에서 고시한 발파작업 표준 안전작업지침에 대하여 검토하였고, 국내화약시장에 도입된 신제품과 최신발파기술이 지침의 개정 시 반영될 수 있도록 화약류에 대한 용어의 정의와 추가로 포함해야 하는 에멀젼계 폭약과 벌크형태의 폭약, 그리고 최근 국내 발파현장에서 사용이 증가하고 있는 전자뇌관에 대하여 수록을 제안하였다. 또한, 작업지침에 대해서는 비전기식 뇌관과 전자뇌관의 대표적인 취급 방법을 예시를 들어 제안하여 지침안 개정 시 보완된 발파작업 표준 안전작업지침을 마련하도록 제안하였다.

• 한국생산제조학회지
• /
• 제6권4호
• /
• pp.72-79
• /
• 1997

A study is a experiment which is figure out to optimum discharge cutting condition of the surface roughness, electronic discharging speed and electrode wear ration with Ton , Toff and V(voltage) as an input condition according to the current(Ip) in an electric spark machine : 1) Electrode is utilized Cu and Graphite. 2) Work piece is used the material of carbon steel. The condition of experiment is : 1) Current is varied 0.7(A) to 50(A) and the time of electric discharging to work piece in each time is 30(min) to 60(min). 2) After the upper side of work piece was measured in radius(5$\mu$m) of stylus analyzed the surface roughness to ade the table and graph of Rmax by yielding data. 3) Electro wear ratio is : \circled1Cooper was measured ex-machining and post-machining by the electronic balance. \circled2The ex-machining of graphite measured by it, the post-machining was found the data from volume $\times$specific gravity and analyzed to made its table and graph on ground the data. 4) In order to keep the accuracy of voltage affected to the work piece was equipped with the A.V. R and the memory scope was sticked to the electric spark machine. 5) In order to preserve the precision of current, to get rid of the noise occured by internal resistance of electric spark machine and to force injecting for the discharge fluid , it made the fixed table for a work piece to minimize the work error by means of one's failure during the electric discharging.

• 태양에너지
• /
• 제17권1호
• /
• pp.59-66
• /
• 1997

개방전압과 단락전류와 같은 태양전지 출력변수들은 접합깊이, 도핑농도, 금속접합 및 태양전지구조에 의한 변수들이다. 태양전지 설계의 중요한 요소로서 인이 도핑된 에미터와 금속사이의 금속접합은 일함수 차이가 작아 낮은 직렬저항을 가져야 한다. PESC 태양전지는 금속 접합장벽 전극으로 티타늄을 사용한다. 새로운 접합장벽 전극물질로 티타늄과 일함수가 비슷하지만 전기전도도가 우수한 크롬은 금속 접합장벽 전극으로 유망한 금속이다. 티타늄은 일함수 차가 작지만, 접합장벽으로 크롬은 태양전지 제조시 티타늄보다 우수한 전기적 특성들을 갖는다. 본 논문에서는 실리콘 태양전지의 접합장벽 금속전극의 특성을 비교 분석하였다.

• 물과 미래
• /
• 제7권2호
• /
• pp.11-22
• /
• 1974

Comparing with Seoul city's other administrative works, the work to arrange and collect monthly water rates with 470,000 faucets is tremendous in volume and simple repetition in quality. In order to cover the shortage of handling, it is urgent for us to replace the present manual system with EDP(Electronic Data Processing) system to mechanize a series of handling works of simple repeated calculation such as water consumption, rate calculation, statistics arrangement, bills and specification of water rate by computer. When this work is completely mechanized, inspectors of water meter just turn over their checking results to the Data Center and all data are processed through Input Media(OMR Card, Punched Card) and computer for programming final bills. Then, the delivery of the bills to citizens will be the only work to be carried out. such mechanization will bring about the following benefits: 1. Improvement of administrative work by efficiency and rationalization. 2. Improvement of administrative service with people. 3. Possibility of scientific with trustworthy multi-purpose policy-making data. 4. An effect to cover the personnel shortage of 252 persons (at all the water works offices) and save manpower of 166 persons (47,619 man-days). The application of the above mentioned mechanization will be started to only Chongro and Chung-ku water works offices as model cases out of all water works offices in Seoul. As the electronic calculating machines are inducted, this system will be gradually applied to other water works offices. The billing and collection works of water rates which are connected directly to the daily life of the citizenes, should be handled by the scientific EDP system as soon as possible in order to promote the convenience of consumers and effective operation. This study is to promote the sound and rational operation of this work.

• The Korean Journal of Ceramics
• /
• 제2권4호
• /
• pp.188-192
• /
• 1996

Diamond based electronic devices promise to exhibit unique properties. In order to realize devices diamond has to be doped to render it electrically conductive. In the present work the doping of diamond and of polycrystalline CVD diamond films are reviewd with particular emphasis to ion-implantation doping and to attempts to dope diamond by in-diffusion of the dopants. The quest for finding ways to obtain n-type conductivity in diamond will be critically examined.