• 전자공학회논문지 IE
• /
• v.48 no.4
• /
• pp.7-12
• /
• 2011

This paper described a metal mount RFID tag that works reliably on metallic surface. The proposed method is to use commercial RFID tags, Styrofoam103.7 material is attached on back side of RFID tag. Styrofoam103.7 material which has 2.5 mm thickness and 1.03 relative permittivity, was attached on back side of RFID tag. In order to verify the performance of proposed method, we evaluated the experiment on the supply chain system of electric transformers using RFID. The experimental results on supply chain of electric transformers show that the proposed tags can communicate with readers from a distance of 2 m. The results of recognition rates are comparable to commercial metallic mountable tags.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.4 no.4
• /
• pp.311-317
• /
• 2011

Recently, RFID is substituted for bar codes according to advance in the ubiquitous computing environments, but the RFID system has several problems such as security and privacy because it uses radio frequencies. Firstly, unauthorized reader can easily read the ID information of any Tag. Secondly, Attacker can easily fake the legitimate reader using the collected Tag ID information,such as the any legitimate tag. This paper proposed improved RFID authentication protocol based on SSG. SSG is organized only one LFSR and selection logic. Thus SSG is suitable for implementation of hardware logic in system with extremely limited resources such as RFID tag and it has resistance to known various attacks because of output bit stream for the use as pseudorandom generator. The proposed protocol is secure and effective because it is based on SSG.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.4
• /
• pp.203-211
• /
• 2013

UHF RFID tag designers usually ndde the chip impedance and read power sensitivity value obtained when a tag chip is mounted on a chip pad. The chip impedance, however, is not able to be supplied by chip manufacturer, since the chip impedance is varied according to tag designs and fabrication processes. Instead, the chip makers mostly supply the chip impedances measured on the bare dies. This study proposes a chip impedance and read power sensitivity evaluation method which requires a few simple auxiliary and some RF measuring equipment. As it is impractical to measure the chip impedance directly at mounted chip terminals, some form test fixture is employed and the effect of the fixture is modeled and de-embeded to determine the chip impedance and the read power sensitivity. Validity and accuracy of the proposed de-embed method are examined by using commercial RFID tag chips as well as a capacitor and a resistor the value of which are known.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.2 no.2
• /
• pp.57-62
• /
• 2009

In this paper, we proposed the metal tag antenna of PIFA structure with an isotropic radiation pattern when tag attached the metal material. The antenna consist of antenna body, horizontal patch and ground, and inserted a substrate with high dielectric constant between the antenna body and ground in order to miniaturize the antenna size. The antenna body with symmetric structure is designed to produce an oppositely directed currents. The simulation shows the impedance bandwidth has 20 MHz (900 ~ 920 MHz) and the maximum radiation gain satisfy the -10 dBi and -15 dBi when the tag is in air and attach the metal material. Also, the proposed antenna operates with an isotropic radiation pattern due to satisfy the gain deviation lower than 6 dB, respectively.

• The KIPS Transactions:PartC
• /
• v.11C no.6 s.95
• /
• pp.851-862
• /
• 2004

RFID(Radio frequency IDentification) is a technology that automatically identifies objects containing the electronic tags by using radio wave. The multi-tag identification problem is the core issue in the RFID and could be resolved by the anti-collision algorithm. However, most of the existing anti-collision algorithms have a problem of heavy implementation cost and low performance. In this paper. we propose a new tree based memoryless anti-collision algorithm called a collision tracking tree algorithm and presents its performance evaluation results obtained by simulation. The Collision Tracking Tree algorithm proves itself the capability of an identification rate of 749 tags per second and the performance evaluation results also show that the proposed algorithm outperforms the other two existing tree-based memoryless algorithms, i.e., the tree-walking algorithm and the query tree algorithm about 49 and 2.4 times respectively.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.8 no.5
• /
• pp.229-234
• /
• 2008

XBRL is fundamentally defined as a structure that enterprises expand based on KGAAP 2.1 developed by the Korea branch of XBRL. Each enterprise selects its type of business and must check and choose the tag suitable to each enterprise. Since a complicated part such as expanding tag exists, there is a difficulty to prepare document through the step of tag expansion and data input. Although the expressive way of style provides the standards using the presentation structure and label structure provided fundamentally by XBRL, there is a complicated problem of using XBRL Processor. The electronic public disclosure system of the Financial Supervisory Service (DART) and Korea Exchange (KIND, KEDIS) use the Markup Language of SGML, XML and XBRL as format language. The procedure of defining document and process method vary in accordance with the characteristics of each language. This study analyzes the effect by step in accordance with format language of each electronic disclosure system and studies a direction of format language.

• Journal of the Korean Society for Precision Engineering
• /
• v.25 no.11
• /
• pp.90-94
• /
• 2008

Recently, a great deal of research is focused on the printed electronics. One of their mainly concerned products is printed RFID tag. RFID technology has attracted researchers and enterprises as a promising method for automatic identification, and they are expected to replace conventional bar codes in inventory tracking and management. The key to successful RFID technology lies in developing low-cost RFID tags and the first step in applying printing technology to RFID systems is to replace antennas that are conventionally produced by etching copper or aluminum. However, due to the printing quality variations, errors, and lower conductivity, the performance of the printed RFID antennas is lower than that of antennas manufactured by conventional etching methods. In this paper, the effect of variations in the printing conditions on the antenna performance is investigated. Three levels for each condition parameter is assumed and effect on the resonant frequency are examined experimentally based on orthogonal array. The most serious factor that affects the resonant frequency of the antenna is the non-uniformity of the edge and the resonant frequency is found to be lower as the non-uniformity increases.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.6 no.4
• /
• pp.511-516
• /
• 2011

Recently, the development of computing technology and experiential content for the increased interest in education and cultural facilities to target children and young people experience learning and experiential entertainment systems require a high propensity to invest and are. In this paper, for the 13.56MHz band RFID Reader and Tag RFID technology using the proposed interactive educational globe. Active tags attached to sensors attached to the globe were presented in the RFID reader, arduino and sensors in conjunction with Google Earth COM API was constructed through the physical computing educational system.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.3 no.2
• /
• pp.106-111
• /
• 2008

At the ubiquitous computing, Mobile RFID, which the convergence RFID and mobile device, researches are core method and infra to service B2B, B2C, and B2B2C service domain. We propose the functions of middleware to develop the mobile RFID device. It consists of multi-code integrated recognition module, the reader control module, the module code interpretation, and Dispatcher module. These functions can recognize the tag of EPC/ISO and mCode type. We describe the zone file of local ODS and the implemented module to read the 13.56MHz tag.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.6 no.5
• /
• pp.797-802
• /
• 2011

RFID is recognized to technically occupy important position in ubiquitous computing environment and expected to create new markets in a variety of fields from now on. In order to generalize RFID system, it is required to solve the problem of privacy invasion and expedite lots of tags We suggest efficient RFID Tag Identification to identify tags quickly on the satisfaction with 3 security requirements of privacy protection in this paper. This methods are transferred to Grid environment through parallel analysis of Hash-Chain, and we measure performance of each nodes under the Grid environment. Then, We'll suggest SP-Division Algorithm to identify tags with each nodes and implement it in a Grid environment.