• Journal of the Optical Society of Korea
• /
• 제2권1호
• /
• pp.34-37
• /
• 1998

We present a novel method for the stabilization of the Sagnac current sensor with active twist control. The sensor output was improved more than 8 times by employing the proposed stabilization method. Stability within $\pm$1.7% was demonstrated between 36$^{\circ}C$ and 62$^{\circ}C$.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제13권4호
• /
• pp.355-360
• /
• 2013

A wireless intraocular (IOP) pressure sensor based on micro electro mechanical system (MEMS) technology is proposed. The proposed IOP sensor uses variable inductance according to the external pressure. The proposed sensor is composed of two flexible membranes: a ferrite bottom part, an inductor, and a capacitor. The inductance of the sensor varies according to the external pressure. The resonance frequency of the sensor is also varied, and this frequency is detected using an external coil. The external coil is designed with an FR-4 printed circuit board. The feasibility of the proposed sensor structure using variable inductance to detect the external pressure is successfully demonstrated.

• 센서학회지
• /
• 제30권1호
• /
• pp.25-29
• /
• 2021

In this study, we successfully developed a highly reliable ultrasonic sediment sensor to detect the sediment levels in sewer pipes in harsh environments. The ultrasonic transducer employed in the ultrasonic sediment sensor was designed so as to possess a simple structure. The developed sensor was carefully optimized by simulating the electromechanical characteristics, radiated sound wave pressures, and directivity via finite element analysis. It was also designed to possess a simple mounting structure minimizing the flow disturbance in a 400-mm sewer pipe; additionally, eight ultrasonic transducers were arranged in a four-channel mode, allowing for measurement of the sediment height in five easy steps. Through experimental evaluations, we verified the performance of the ultrasonic sediment-level sensor and its industrial applicability. The results suggested that although the precision value was notably low at 15 mm, the sediment detection performance was adequate; therefore, the developed sensor can potentially be used in industrial applications.

• 한국전기전자재료학회논문지
• /
• 제32권3호
• /
• pp.223-228
• /
• 2019

We fabricated a printed Ag:CNT film as a liquid sensor for the detection of HNS (hazardous and noxious substances) in seawater. The paste required for printing was prepared using Ag powder, MWCNTs (multi-walled carbon nanotubes), and an organic binder. The heat treatment process for binder removal was optimized. In order to confirm that the sensor was operational, the resistance change characteristics in brine (3.5%) and methanol (99.8%) were assessed at $20^{\circ}C$. EDL (electrical double layer) formation and redox reactivity were confirmed as the most important reactions affect each electrical property of sensor in brine and methanol. From these results, it was determined that printed Ag:CNT film can be applied as a sensor to detect HNS in seawater.

• 센서학회지
• /
• 제30권1호
• /
• pp.61-65
• /
• 2021

In this study, we propose a 2500 frame per second (fps) high-speed binary complementary metal oxide semiconductor (CMOS) image sensor using a gate/body-tied (GBT) p-channel metal oxide semiconductor field effect transistor-type high-speed photodetector. The GBT photodetector generates a photocurrent that is several hundred times larger than that of a conventional N+/P-substrate photodetector. By implementing an additional binary operation for the GBT photodetector with such high-sensitivity characteristics, a high-speed operation of approximately 2500 fps was confirmed through the output image. The circuit for binary operation was designed with a comparator and 1-bit memory. Therefore, the proposed binary CMOS image sensor does not require an additional analog-to-digital converter (ADC). The proposed 2500 fps high-speed operation binary CMOS image sensor was fabricated and measured using standard CMOS process.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제17권2호
• /
• pp.180-185
• /
• 2017

In this research, we proposed the simple and efficient method to calculate the shear stresses by using the mid-point measurements in ${\pm}45^{\circ}$ semiconductor resistor-sensor pair. Compared to the previous works, the measurements became much simpler by combining the approximation theory with the technique of mid-point measurement. In addition, we proposed another novel method for the stress calculation in which we could increase the sensitivity of the stress sensor by controlling the applied voltage between the sensor-pair. For the applied voltage of 8 V, the sensitivity showed a significant increase by 100%.

• 센서학회지
• /
• 제25권4호
• /
• pp.257-263
• /
• 2016

Among several technologies related to human brain, Brain Computer Interface (BCI) system is one of the most notable technologies recently. Conventional BCI for direct communication between human brain and machine are discomfort because normally electroencephalograghy(EEG) signal is measured by using multichannel EEG sensor. In this study, we propose 2-channel EEG sensor-based application control system which is more convenience and low complexity to wear to get EEG signal. EEG sensor module and system algorithm used in this study are developed and designed and one of the BCI methods, Motor Imagery (MI) is implemented in the system. Experiments are consisted of accuracy measurement of MI classification and driving control test. The results show that our simple wearable system has comparable performance with studies using multi-channel EEG sensor-based system, even better performance than other studies.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 추계학술대회 논문집 Vol.19
• /
• pp.251-252
• /
• 2006

A development of surface acoustic wave gas sensor to detecting volatile gas has been observed by monitoring output signal as function of time onto the network analyzer. The SAW sensor with a center frequency of 200MHz was fabricated on $42^{\circ}$ S-T Quartz substrates. Using the gas chromatography column has been selectivity. Experimental results, which show the phase change of output signal under the absorption of volatile gas onto sensors, were presented. The proposed sensor has the properties of high sensitivity compare to the conventional SAW gas sensor and chemical selectivity. Thus, it is thought these results are applicable for use in sensor array of an high performance electronic nose system.

• 반도체디스플레이기술학회지
• /
• 제7권4호
• /
• pp.51-55
• /
• 2008

In this study, we have figured out exercise time and the amount of burned calories, using a three-axis acceleration sensor which we name as a health sensor. What is more, the health sensor calculates the degree of physical exercise taken during exercise. As is generally known, continuing, regular exercise is far more effective than short time exercise for sustainable health management. The health sensor is, therefore, recommended as an instrument to efficiently carry out the health management. Additionally, the health sensor was applied as an exercise subsidiary system to walking and jumping rope tests. In light of their results, the sensor system was found useful for analyzing the pattern of exercise.

• Journal of Power Electronics
• /
• 제6권1호
• /
• pp.8-17
• /
• 2006

In this paper, we propose a fault-tolerant control system for the position control and vibration suppression of a flexible arm robot. The proposed control system has a strain gauge sensor signal observer based on a reaction force observer and detects a fault by monitoring an estimated error. In order to improve the estimation accuracy, the plant parameters included in the sensor signal observer are updated by using the strain gauge sensor signal in normal time through the adaptive law. After fault detection, the proposed control system exchanges the faulty sensor signal for the estimated one and switches to a fault mode controller so as to maintain the stability and the control performance. We confirmed the effectiveness of the proposed control system through several experiments.