• 경영과학
• /
• 제23권2호
• /
• pp.93-107
• /
• 2006

This paper attempts to improve the typical DEA model that is often used as a performance evaluation method for service firms. The after-sales service system in a Korean electronic company is chosen as a sample case. The performance evaluation method currently practiced in the firm was reviewed and some critical issues of the current method were discussed. DEA model would be considered a solution for solving those Issues. However, typical DEA models has various drawbacks in determining the weights over evaluation criteria. Proposed is the priority-constrained DEA model that accommodates the strategic Importance of each evaluation criterion. The results of the proposed model are compared with those of typical DEA models. It is shown that the priority-constrained DEA model is superior to the others in terms of evaluation quality.

• 센서학회지
• /
• 제27권2호
• /
• pp.118-125
• /
• 2018

An evaluation system for an electronic-nose concept using three types of metal oxide gas sensors that react similarly to the human olfactory cells was constructed for the quantitative and qualitative evaluation of aroma fragrances. Four types of aroma fragrances (lavender, orange, jasmine, and Roman chamomile), which are commonly used in aromatherapy, were evaluated. All the gas sensors reacted remarkably to the aroma fragrances and the good correlation of r=0.58-0.88 with the aromatic odor intensities by olfaction was confirmed. From the results of the analysis of an electronic-nose concept for classifying the characteristics of aroma oil fragrances, aroma oils could be classified using the fragrance characteristics and oil extraction methods with the cumulative variability contribution rate of 95.65% (F1: 69.65%, F2: 26.03%) by principal component analysis. In the pattern recognition based on the artificial neural network, the four aroma fragrances were 100% recognized through the training data of 56 cases (70%) out of 80 cases, and the pattern recognition rate was 57.1%-71.4% through the validation and testing data of 24 cases (30%). The pattern recognition success rate through all confusion matrices was 82.1%, indicating that the classification of aroma oil fragrances using the three types of gas sensors was successful.

• 한국식품조리과학회지
• /
• 제18권4호
• /
• pp.448-454
• /
• 2002

This study was performed to develop Cnidium officinale-flavored oils. Cnidium officinale is one of the Korean aromatic medicinal plants. The flavor patterns of Cnidium officinale-flavored oils during storage were detected by using an electronic nose with 6 metal oxide sensors, and a principal component analysis (PCA) was carried out. The overall acceptability of flavor and the masking effects on fetid smell of beef of Cnidium officinale-flavored oils were investigated by sensory evaluation. In COI-flavored oil, flavor patterns between the storage samples for 1 week and 16 weeks could be distinguished. And in CO II-flavored oil, flavor patterns between the samples stored for 1 week and 8 weeks and the flavor patterns between the samples stored for 1 week and 16 weeks in CS I-flavored oil could be distinguished. In CS II-flavored oil, flavor patterns of the samples stored for 1, 4, and 8 weeks also could be distinguished. Fetid smell in beef was significantly reduced by the addition of COI- and CS II-flavored oils. As the storage time increased, overall acceptability of Cnidium officinale-flavored oil decreased, indicating that Cnidium officinale-flavored oils were most preferred at 8 weeks of storage.

• 한국전자통신학회논문지
• /
• 제14권6호
• /
• pp.1053-1060
• /
• 2019

인공위성을 통한 정보수집은 위성에 탑재된 안테나를 기반으로 수행되는데, 위성 안테나는 크게 반사판 안테나, 렌즈 안테나, 위상배열 안테나로 분류된다. 이 중 다중빔 시스템 등의 안테나 패턴 조절 기능이 우수한, 위상배열 안테나가 많이 사용되는 추세이다. 위성 기반의 지상 신호정보 수집은 지리적 영향을 적게 받는 효율성을 가지나, 정확한 신호의 도래각 정보가 요구된다. 본 논문에서는 위상배열 안테나에 사용되는 안테나 배열형상에 대한 특징 및 장단점을 고찰한다. 또한, 위성 수신단에 탑재된 정방배열 안테나 기반의 캐스케이드 도래각 추정 알고리즘을 소개하고, 시뮬레이션을 통한 성능평가 결과를 제시한다.

• 한국정보과학회논문지:소프트웨어및응용
• /
• 제35권8호
• /
• pp.493-500
• /
• 2008

가상 대장 내시경을 위해서 환자 대장 CT 프로파일을 이용한 전자적 장세척 방법을 제안한다. 제안된 방법은 관강 영역을 cubic seeded region growing(SRG) 방법을 이용하여 추출하고, 이에 인접한 tagged material(TM)을 제거한다. TM의 경계에서 Air-TM의 partial volume(PV) 효과로 발생한 찌꺼기를 제거하고, TM-soft tissue(ST)의 PVE에 의해서 제거된 ST는 환자 CT 프로파일을 이용해서 복원한다. 제안된 방법을 16명의 가상 내시경 환자 CT 데이타에 적용해서 임상의의 주관적인 평가와 computer-aided diagnosis(CAD)의 정량적 평가에서 매우 고무적인 결과를 획득했다.

• 한국전기전자재료학회논문지
• /
• 제24권1호
• /
• pp.36-41
• /
• 2011

Medical X-ray has been brought many changes according to the rapid development of high technology. Especially, for high-voltage generator which is the most important in X-ray generation the traditional way is to use high-voltage electric transformers primarily. However, since it is large and heavy and the ripple rate of DC high-voltage applied to X-ray tube is too big, it has a disadvantage of low X-ray production efficiency. To solve these problems, the studies about high-voltage power supply are now proceeding. At present, the high-voltage generator that generates high-voltage by making high frequency using inverter control circuit consisting of semiconductor device is mainly used. High-voltage generator using inverter has advantages in the diagnosis using X-ray including high performance with short-term use, miniaturization of power supply and ripple reduction. In this study, the X-ray high-voltage device with inverter type using pulse width modulation scheme to the control of tube voltage and tube current was designed and produced. For performance evaluation of produced device, the control signal analysis, irradiation dose change and beam quality depending on the load variation of tube voltage and tube current were evaluated.

• 정보학연구
• /
• 제4권2호
• /
• pp.137-154
• /
• 2001

본 연구는 정부의 전자상거래 활성화 종합대책의 일환으로 산업자원부가 추진하여 2000년 6월 17일 입법 공고되어 2001년 3월부터 시행된 대외무역법의 디지털제품(온라인거래)의 수출이입실적 인정 및 전자무역중개기관도입 관련조항 등의 개정내용을 중심으로 전자무역지원법령으로의 대외무역법이 개정되는 의미를 평가하고, 개정 내용의 조문에 나타난 문제점을 구체적으로 지적함으로써 실무자들로 하여금 적용상의 유의점들을 제시하고 향후 입법의 방향을 제시하는데 일조함을 목적으로 한다.

• 반도체디스플레이기술학회지
• /
• 제8권4호
• /
• pp.77-82
• /
• 2009

In robot operation, a motor with multi-degree of freedom motion control and an encoder for motor control are needed. To perform precise motion, location, and velocity control, the operation of motor and encoder with superior performance is important. In this paper, we studied performance evaluation system that can evaluate the performance of motor and encoder. The performance of motor and encoder can be evaluated in terms of disconnection check, signal variation count, and U, V, W signal check. Disconnection check verifies signal connection between a motor and an encoder, signal variation check verifies A, B signal by counting the number of signal A, B when a motor revolves, and U, V, W signal check verifies operating direction of a motor. The result is shown at graphic LCD integrated in system, and can be checked in PC with PC communication.

• 한국정밀공학회지
• /
• 제13권5호
• /
• pp.104-114
• /
• 1996

For the improvement of productivity, the reduction of cost and time for manufacturing is mandatory, especially in the field of electromic industry. The study is concerned with a practical means of systematic assistance to formability estimation and selection of reliable design specification for electronic sheet metal parts. The objective of this research work is to develop a simulation system which hops to analyze the target processes with the finite element method and to acquire available design data quickly and exactly. The simulation system developed in the study consists of design verification, selection of optimal combination of parameters, knowledge acquisition and graphical user interface(GUI). Design verification is automatically carried out by using the finite element method. A data base management system and nomograms are utilized for knowledge acquisition. The developed system has been applied to some major sheet metal forming operations such as flanging, embossing, bending and blanking. According to the simulated results, the validation of the target processes has been confirmend. Analysis data, estimation rules of formability and graphical representation of the analysis have been employed for the designer's understanding and evaluation, thus providing a practical means of robust design and evaluation of forma- bility for producing electronic sheet metal parts.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제17권3호
• /
• pp.236-245
• /
• 2017

Purpose: There is no established inspection system for composite wind blade during the fabrication stage even though the blades are one of the most important part at wind generation system, but phased array ultrasonic testing method has been continuously studied about wind turbine blade with composite. When wind turbine blade with complex shape by phased array probe is inspected, it is necessary to study for system keeping constant pressure using pressure device. Methods: In this paper, we propose constant pressure device for inspecting wind turbine blade by phased array ultrasonic test method. Design of the device controller is based on Hunt-Crossley model. We evaluate reliability of phased array ultrasonic inspection result that applicated constant pressure device. Result: Defect indication is precise and its error is small when constant pressure mechanism based on Hunt-Crossley model was used. Conclusion: When inspection is progressed using constant pressure mechanism, the reliability of composite wind blade inspection can be improved.