• Proceedings of the KIEE Conference
• /
• 1999.07a
• /
• pp.443-445
• /
• 1999

본 연구에서는 고도의 전문가 수준에서 역구내 상황을 고려하여 실시간 전자연동처리전략을 수립함으로써 열차운행을 안전하고 정확하게 제어 열차충돌이나 탈선 등의 사고를 사전에 방지함으로써 보다 높은 안전도가 보장될 수 있도록 지원하는 전문가 시스템이 제안된다. 전문가 시스템은 열차의 역구내 운행시 신호기, 전철기 궤도회로 등의 입력정보로부터 연동 지식베이스에 근거하여 신호설비들간의 연쇄관계를 확인, 실시간 연동전략을 수립하며, 연동규칙을 정확하고 효과적으로 표시할 수 있도록 규칙기반 시스템으로 구현된다. 특히, 제어실패시 논리적 추론기능과 협조하여 합리적인 진로를 제시함으로써 비상시 역무원이 당황하지 않고 신속하고 안전하게 연동업무를 처리할 수 있도록 한다.

• Proceedings of the KSR Conference
• /
• 2002.05a
• /
• pp.516-521
• /
• 2002

According as railway signalling equipments are computerized recently, necessity of communication protocol for interface between these equipments is increasing, Therefore the research about communication protocol structure that is need according to computerization trend of these signalling goes, especially communication protocol structure for interface between LDTS(Local Data Transmission System) and EIS(Electronic Interlocking System). Analyzed existent protocols that is applied currently for interfaces between above two signalling for this research and also technology analysis of internal/external similar protocols and operator and maker's requirement. With these study finding plain in this paper, explained summary of communication protocol structure for interface between LDTS and EIS.

• Proceedings of the KSR Conference
• /
• 2003.10c
• /
• pp.183-189
• /
• 2003

In this paper a simulation was done to verify performance of a message transmission protocol which interfaces LDTS(Local Data Transmission System) with EIS(Electronic Interlocking System), After a stage of analyzing link specifications between LDTS and EIS, transmission messages and messaging formats, simulation parameters were extracted, applied to the error control schemes such as ARQ, FEC, HARQ, and therefrom throughputs and various performance indices were analyzed Simulation program was constructed with Matlab and Matlab GUI and then converted into a stand-alone c++ program to be used on any non-Matlab environments.

• Proceedings of the KIEE Conference
• /
• 2003.07d
• /
• pp.2630-2632
• /
• 2003

본 연구는 철도 선로변에 설치되는 LDTS(Local Data Transmission System)와 EIS(Electronic Interlocking System) 사이의 인터페이스를 위한 정보전송 프로토콜에 대한 성능검증 시뮬레이션을 위한 것으로, LDTS와 EIS사이의 링크사양, 전송 메시지 정보 및 형식, 장치간 전송 프로토콜 기준 등을 분석하여 파라미터들을 추출한 후, 이들을 ARQ, FEC, HARQ 방식들에 적용하여 처리율(Throughput) 및 여러 설계변수들에 대한 시뮬레이션 결과를 비교하였다. 시뮬레이션 프로그램은 Matlab과 Matlab GUI 툴을 이용하여 작성하여 사용자가 손쉽게 시뮬레이션 파라미터들을 조정할 수 있도록 하였고, Matlab 프로그램 완성후에는 이를 Stand-alone C++ 프로그램으로 코드변환하여 Matlab이 설치되지 않은 컴퓨터에서도 프로그램 사용이 가능하도록 하였다.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.13 no.6
• /
• pp.1275-1280
• /
• 2018

We made a smartphone interlocking location tracking streetlight and remote display device to compensate the defect of real time identifiable CCTV streetlights and child safety notification applications. It controls brightness of LED by detecting the surrounding brightness and objects with ultrasonic sensor and illuminance senor. The CCTV receives the location of smartphone by Bluetooth and takes the target of the location. It realizes a wireless transmission system that the video is upload to the tablet PC via WiFi.

• Journal of the Korean Society for Railway
• /
• v.9 no.6 s.37
• /
• pp.732-738
• /
• 2006

This research provides a scheme for Highly Accelerated Stress Test that is necessary to demonstrate reliability prediction of Korean Rapid Transit Railway Train Control System sub-equipment, which is calculated by a relevant standard for failure rate prediction of electronic products. Although determining failure information generated in the process of trial running by statistic analysis is widely accepted as a measure of confirmation for reliability prediction, this research suggests the modeling for System Life Test determined by accelerating stress factors as a measure of confirmation for reliability prediction of sub-equipment unit that is generated ahead of a trial running in System Life Cycle. Consequently, the research demonstrates sub-equipment unit reliability test, which is based on the model derived from Accelerated Stress Test, according to accuracy level and the number of samples, and conducts an official experiment by making out a reliability test procedure sheet based on test time as well.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.8
• /
• pp.2983-2988
• /
• 2010

The train control system used in Gyeongbu-line is classified in ATC, IXL and CTC. Domestic railway signaling systems are being developed by electrification. In these systems the electrification of interlocking reaches 57% and the safety equipments of railway crossings in trackside devices have completed their development into an integrated system. Block systems of all the existing sections have not yet electrified and integrated so that they need a number of complement in terms of construction and maintenance. For ABS currently used in existing domestic lines, and LEU being installed in Gyeongbu and Honam lines, although a train is controlled by the signaling information of the same train in the same location, the system is separately installed so that the same information is separately divided and transmitted at the each distinct system. Therefore, in the conventional ABS and LEU, there are a lot of duplicate installed compartments such as lamp detection and a power supply unit. Hence, we have a lot of problems: for maintenance, a lot of manpower and costs need to be invested and the overall manufacturing costs get higher, as well as the construction costs by duplicate. Therefore, this paper suggest design to develop an integrated electronic Block Control Unit by the integration of the currently used ABS, and communication and electronic technology. We are to monitor and manage the block systems in the corresponding station by integrating. And we are to transmit information together with LEU, which is an ATS wayside transmitter.

• Journal of The Korean Society For Urban Railway
• /
• v.6 no.4
• /
• pp.427-436
• /
• 2018

HADAX is a serial communication converter of train control computer. It is connected with various signal equipments such as wayside signal equipments, station signal equipments, train control computers, and transmits control information and signal condition information for train control. And transmits information to several electronic interlocking devices through a splitter interface. Since HADAX interfaces with many signaling devices through serial communication, frequent communication connection faults necessitate improvement of performance such as dual system configuration, integration of external splitter, and multi-channelization of communication card. The improved HADAX device should have compatibility with the dimensions of existing enclosure and enclosure, and verify the performance of dual system and splitter integration. Therefore, we verified the performance of HADAX through the route control test, dual system test, and multi-channel communication test with splitter integrated connection by connecting with the existing signal equipment.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.12 no.4
• /
• pp.671-678
• /
• 2017

Recent advances in Internet of Things (IoT) encourage us to use IoT devices in daily living areas. However, as IoT devices are being ubiquitously used, concerns onsecurity and privacy of IoT devices are getting grown. Key management is an important and fundamental task to provide security services. For better security, we should restrict reusing a same key in sequential authentication sessions, but it is difficult to manually update and memorize keys. In this paper, we propose a hardware security module(HSM) for automated key management in IoT devices. Our HSM is attached to an IoT device and communicates with the device. It provides an automated, secure key update process without any user intervention. The secure keys provided by our HSM can be used in the user and device authentications for any internet services.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.11
• /
• pp.688-694
• /
• 2018

The mixture ratio of two-component liquid silicone is important for the inherent physical characteristics of the finished product. Therefore, it is necessary to uniformly control the ratio of the main material and the sub-material. In this paper, a mixing-ratio control system was designed, which consists of a digital flow meter and a flow control system to measure the flow rate of the raw materials and a pumping system to maintain constant pressure and transfer of the raw materials. In addition, a program was developed to control the organic interlocking and mixing ratio. For the verification of the developed system, we compared the actual weight of raw material with the value measured by the flow meter during pumping, and we measured the physical properties of the mixed material by making test samples with and without the application of the mixing-ratio improvement algorithm. The measured value was close to the reference value with a hardness range of 46-47 and tensile strength of 9.3-9.5 MPa. These results show that the mixing ratio of the liquid silicone is controlled within an error range of ${\pm}0.5%$.