• Journal of Broadcast Engineering
• /
• v.16 no.3
• /
• pp.403-415
• /
• 2011

In this paper, we proposed a hardware architecture to generate digital holograms at high speed. It used the modified computer-generated hologram (CGH) algorithm and adapted the pipeline-based hardware to be able to remove memory bottleneck problem. It uses not the method which generates a hologram by accumulating intermittent holograms but the one which independently generates a pixel of a final hologram and uses the appropriate CGH algorithm for the selected method. Based on the CGH algorithm we proposed the architecture of the digital hologram generator which consists of input interface part, calculating part, and normalizing part. The hardware can decrease memory usage because it repeatedly use object light sources which is stored in the internal buffer. It is also operationally parallelized by vertically adding unit cells. It can generate 86 frames of HD digital hologram per 1 second for 1K light sources.

• Proceedings of the IEEK Conference
• /
• 2005.11a
• /
• pp.591-594
• /
• 2005

This paper describes a design of AES-based CCM Protocol for IEEE 802.11i Wireless LAN Security. The CCMP core is designed with 128-bit data path and iterative structyre which uses 1 clock cycle per round operation. To maximize its performance, two AES cores are used, one is for counter mode for data confidentiality and the other is for CBC(Cipher Block Chaining) mode for authentication and data integrity. The S-box that requires the largest hardware in AES core is implemented using composite field arithmetic, and the gate count is reduced by about 23% compared with conventional LUT-based design. The CCMP core designed in Verilog-HDL has 35,013 gates, and the estimated throughput is about 768Mbps at 66-MHz clock frequency.

• Journal of Industrial Technology
• /
• v.26 no.B
• /
• pp.243-248
• /
• 2006

The purpose of this study is to design a body-fat measurable electronic scale which can measure body impedance and weight. The hardware configuration of this system for the body-fat measurement includes a sinewave constant current generator, a analog switch circuit and a microprocessor with peripheral interface as well as electronic scale circuit. And the dedicated software is also designed for calculating body fat and body composition analysis from the result of the measurement.

• Proceedings of the IEEK Conference
• /
• 2002.07a
• /
• pp.353-356
• /
• 2002

In this paper, we design an efficient, scalable one-dimensional discrete wavelet transform (1DDWT) filter using data reorder unit (DRU). At each level, the required hardware is optimized by sharing multipliers and adders because the input rate is reduced by a factor of two at each level due to decimation. The proposed architecture shows 100% hardware utilization by balancing hardware with input rate. Furthermore, sharing the coefficients of the highpass and the lowpass filters using the mirror filter property reduces the number of multipliers and adders by half. We designed a scalable DRU that efficiently reorders and feeds inputs to highpass and lowpass filters. The proposed DRU-based architecture is so regular and scalable that it can be easily extended to an arbitrary 1D DWT structure with M taps and J levels. Compared to other architectures, the proposed DWT filter shows efficiency in performance with relatively less hardware.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.43 no.3 s.309
• /
• pp.76-81
• /
• 2006

Recently, Finite field is applied the cryptography in the modern multimedia communication. Especially, block codes such as Elliptic Curve Cryptosystem and Reed-Solomon code among the error correcting codes are defined with finite field. Also, finite field algorithm is conducting the research actively because many kind of application parts need the real time operating ability therefore the exclusive hardware have been implementing. In this paper, we proposed the inverse finite field algorithm over GF($2^8$) using finite composite field and implemented in a hardware, and then compare this hardware with the currently used 'Itoh and Tsujii' hardware in respect to structure, area and computation time. Furthermore, this hardware was inserted into the AES SubBytes block and implemented on FPGA emulator board to confirm that the superiority of the proposed algorithm through the performance evaluation.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.1
• /
• pp.157-165
• /
• 2013

In this paper, efficient digit-serial VLSI architecture for 1D (9,7) lifting-based discrete wavelet transform (DWT) filter has been proposed. The proposed architecture computes the DWT in digit basis, so that the required hardware is reduced. Also, the multiplication is replaced with the shift and add operation to minimize the hardware requirement. Bit allocation for input, output, and the internal data has been determined by analyzing the PSNR. We have carefully designed the data feedback latency not to degrade the performance in the recursive folded scheduling. The proposed digit-serial architecture requires small amount of hardware but achieve 100% of hardware utilization, so we try to optimize the tradeoffs between the hardware cost and the performance. The proposed architecture has been designed and verified by VerilogHDL and synthesized by Synopsys Design Compiler with a DongbuHitek $0.18{\mu}m$ STD cell library. The maximum operating frequency is 330MHz with 3,770 gates in equivalent two input NAND gates.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.10a
• /
• pp.229-232
• /
• 2012

This paper describes performance evaluation using fixed-point Matlab modeling and simulation, and hardware design of LDPC decoder which is based on Improved Normalized Min-Sum(INMS) decoding algorithm. The designed LDPC decoder supports 19 block lengths(576~2304) and 6 code rates(1/2, 2/3A, 2/3B, 3/4A, 3/4B, 5/6) of IEEE 802.16e mobile WiMAX standard. Considering hardware complexity, it is designed using a block-serial(partially parallel) architecture which is based on layered decoding scheme. A DFU based on sign-magnitude arithmetic is adopted to minimize hardware area. Hardware design is optimized by using INMS decoding algorithm whose performance is better than min-sum algorithm.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.5 no.3
• /
• pp.206-215
• /
• 2005

In this paper, we propose a new design method of Genetic Algorithm Processor(GAP) and Evolvable Hardware(EHW). All sorts of creature evolve its structure or shape in order to adapt itself to environments. Evolutionary Computation based on the process of natural selection not only searches the quasi-optimal solution through the evolution process, but also changes the structure to get best results. On the other hand, Genetic Algorithm(GA) is good fur finding solutions of complex optimization problems. However, it has a major drawback, which is its slow execution speed when is implemented in software of a conventional computer. Parallel processing has been one approach to overcome the speed problem of GA. In a point of view of GA, long bit string length caused the system of GA to spend much time that clear up the problem. Evolvable Hardware refers to the automation of electronic circuit design through artificial evolution, and is currently increased with the interested topic in a research domain and an engineering methodology. The studies of EHW generally use the XC6200 of Xilinx. The structure of XC6200 can configure with gate unit. Each unit has connected up, down, right and left cell. But the products can't use because had sterilized. So this paper uses Vertex-E (XCV2000E). The cell of FPGA is made up of Configuration Logic Block (CLB) and can't reconfigure with gate unit. This paper uses Vertex-E is composed of the component as cell of XC6200 cell in VertexE

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39C no.11
• /
• pp.1094-1103
• /
• 2014

In this paper, we survey the works related to the system architecture of avionics and extract characteristics from the related works. On the basis of the investigation, we propose an integrated modular avionics (IMA) architecture that can be used for current avionic upgrades and future avionic developments based on the IMA Core system. To verify the feasibility of the proposed IMA architecture, we have developed the prototype of the IMA Core system that consists of both the common hardware module and the IMA software. It was verified that the developed prototype with the common hardware module contributes to the improvement of maintainability because it can save the time and expenses for the development and can reduce the number of types of hardware modules when compared with Federated architecture. It was also confirmed that the developed prototype can save not only overall system weight, size, and power consumption but also the number of hardware types because the IMA software can support the integrated processing where the single processing hardware module can process multiple software applications.

• Journal of IKEEE
• /
• v.22 no.4
• /
• pp.901-906
• /
• 2018

Due to the development of display technologies for images, the resolution and quality of images are increasing day by day. In accordance with the development of the display technology, researches have been actively conducted on technologies for converting and displaying existing images to higher resolution and quality. Since the results of theses studies are included in the image signal processor, hardware implementation is indispensable. In this paper, we propose a real-time HDR(High Dynamic Range) conversion hardware implementation of LDR(Low Dynamic Range) image using luminance distribution. The proposed method extracts the features of the image using the histogram of the luminance distribution, and extends the luminance and color based on the extracted features. In addition, when the proposed method is designed by hardware IP(Intellectual Property) and its performance is verified, 4K DCI(Digital Cinema Image) can be handled at a rate of 30fps at 265.46MHz.