• Journal of the Korean Magnetics Society
• /
• v.15 no.3
• /
• pp.177-180
• /
• 2005

Ferroelectric $LiTaO_3$ single crystals, grown by the Czochralski method, were thermally treated at temperature $1000^{\circ}C\;and\;1100^{\circ}C$. Electron paramagnetic resonance (EPR) study of stoichiometric $LiTaO_3$ and thermally treated $LiTaO_3$ crystals has been investigated by employing an X-band spectrometer. From the $Fe^{3+}$ EPR spectra, it turned out that there is no change of site location and local site symmetry around $Fe^{3+}$ impurity ion between stoichiometric and thermally treated $LiTaO_3$ single crystals. We confirmed that the ionic state of $Fe^{3+}$ ion changed after thermal treatment. The EPR parameters of $Fe^{3+}$ ion in $LiTaO_3$ single crystals are determined with effective spin Hamiltonian.

• Journal of Radiation Protection and Research
• /
• v.40 no.4
• /
• pp.194-201
• /
• 2015

We have investigated the EPR signal properties in 12 components of two mobile phones (LCD, OLED) using electron paramagnetic resonance (EPR) spectrometer in this study.EPR measurements were performed at normal atmospheric conditions using Bruker EXEXSYS-II E500 spectrometer with X-band bridge, and samples were irradiated by $^{137}Cs$ gamma-ray source. To identify the presence of radiation-induced signal (RIS), the EPR spectra of each sample were measured unirradiated and irradiated at 50 Gy. Then, dose-response curve and signal intensity variating by time after irradiation were measured. As a result, the signal intensity increased after irradiation in all samples except the USIM plastic and IC chip. Among the samples, cover glass(CG), lens, light guide plate(LGP) and diffusion sheet have shown fine linearity ($R^2$ > 0.99). Especially, the LGP had ideal characteristics for dosimetry because there were no signal in 0 Gy and high rate of increase in RIS. However, this sample showed weakness in fading. Signal intensity of LGP and Diffusion Sheet decreased by 50% within 72 hours after irradiation, while signals of Cover Glass and Lens were stably preserved during the short period of time. In order to apply rapidly EPR dosimetry using mobile phone components in large-scale radiation accidents, further studies on signal differences for same components of the different mobile phone, fading, pretreatment of samples and processing of background signal are needed. However, it will be possible to do dosimetry by dose-additive method or comparative method using unirradiated same product in small-scale accident.

• Journal of the Korean Magnetic Resonance Society
• /
• v.16 no.1
• /
• pp.78-90
• /
• 2012

To understand the electronic structure of $[NiS_4]^-$ complex ions, two complexes with such $[NiS_4]^-$ core, $FcCH=CHPymCH_3[Ni(dmit)_2]$ (Pym = pyridinium, $dmit^{2-}$ = 2-thioxo-1,3-dithiole-4,5-dithiolate) and $FcCH=CHPymCH_3[Ni(dddt)_2]{\cdot}{\frac{1}{2}}H_2O$ ($dddt^{2-}=5,6-dihydro-1,4-dithiin-2,3-dithiolato$), were synthesized to be characterized by X-ray crystallography, single crystal electron paramagnetic resonance (EPR) and density functional theory (DFT) calculation. Powder EPR spectra show narrow g-anisotropy but the anisotropy is bigger in $[Ni(dmit)_2]^-$ than in $[Ni(dddt)_2]^-$, indicating bigger spin density in Ni(III) d-orbital of $[Ni(dmit)_2]^-$ than in $[Ni(dddt)_2]^-$, which is consistent to DFT results. EPR studies of the crystals of the complexes surprisingly suggest that the $g_y$-axis of $[Ni(dddt)_2]^-$ is approximately on or perpendicular to the $[NiS_4]^-$ plane while the $g_y$-axis of $[Ni(dmit)_2]^-$ is on the plane, though DFT study of the complexes of this study and previously reported $[NiS_4]^-$ complexes indicate that the $g_y$-axis is on the $[NiS_4]^-$ plane.

• BMB Reports
• /
• v.29 no.2
• /
• pp.169-174
• /
• 1996

Yeast cytochrome c (cyt c) was modified at cysteine-102 with a thiol-specific spin label and its interaction with liposomes containing acidic phospholipids was studied by electron paramagnetic resonance (EPR) spectroscopy. Association of cyt c with liposomes resulted in a significant reduction in the mobility of the spin label and a fraction of cyt c even seemed to be immobilized. Based on a large spectral change upon binding and the proximity of the spin-label to lysine-86 and -87, we propose these two residues to be the potential binding site at neutral pH. The interaction is electrostatic in nature because the spectral changes were reversed by addition of anions. Dissociation of the bound cyt c by anions, however, became less effective as the lipid/protein ratio increased. This suggests a repulsive lateral interaction among the bound cyt c. Unlabeled cyt c molecules added to preformed cyt c-liposome complex displaced the bound (spin labeled) cyt c and the process was competitive and reversible.

• Journal of the Korean Magnetic Resonance Society
• /
• v.5 no.1
• /
• pp.13-18
• /
• 2001

Natural alpha radiation produced a stable defect center to certain minerals. Electron Paramagnetic Resonance(EPR) spectroscopy is a powerful tool f3r quantifying this defect center. EPR method has been applied to trace alpha-radiation effect around the uranium ore deposit. The results show that EPR technique can be used to measure rapidly and nondestructively the defect center produced by natural alpha radiation. In general, a good correlation was achieved between defect center concentration and actinide elements(U, Th). These results imply that the concentration of defect center is dependent on the alpha radiation dose over long time scale.

• Proceedings of the Korean Magnetic Resonance Society Conference
• /
• 2002.08a
• /
• pp.72-72
• /
• 2002

In most traditional sorption study in environmental conditions, experimental sorption data have been measured and interpreted by empirical ways such as partition coefficient and sorption isotherms. A mechanistic understanding of heavy metal interactions with various minerals (metal oxides, clay minerals) in aqueous medium is required to describe the behavior of radioactive metal ions in the environment. Various spectroscopic methods provide direct or indirect information on sorption mechanisms involved. We applied EPR (Electron Paramagnetic Resonance) spectroscopy to investigate the nature of metal ion sorption at water/mineral interfaces using Cu(II) as a spin probe. The major sorbed species and their motional state was identified by their EPR spectra. They showed distinct signals due to their strength of binding, local structure and motional state. The EPR results together with macroscopic sorption data show that sorption involved at least three different mechanisms depending on chemical environments (1).

• Nuclear Engineering and Technology
• /
• v.56 no.1
• /
• pp.123-131
• /
• 2024

Electron paramagnetic resonance (EPR) dosimetry for a tooth from an individual exposed is well known as retrospective dosimetry in radiological accidents. A major constraint of the conventional X-band tooth-EPR dosimetry is the necessity to extract the tooth of the exposed patient for dose assessment. In this study, to conduct the dose assessments of exposed patients through part-extraction of tooth enamel, the minimum detectable dose (MDD) of the tooth enamel was evaluated based on the amount of mass. Further, a field test was conducted via intercomparison using various dose assessment methods to verify the feasibility of X-band tooth-EPR dosimetry using the minimum mass of tooth enamel. The intercomparison results demonstrated that effective dose determination via X-band tooth-EPR dosimetry is reliable. Consequently, it was determined that the minimum mass of tooth enamel required to evaluate an absorbed dose above 0.5 Gy is 15 mg. Thus, EPR dosimetry using 15 mg of tooth enamel can be applied in the triage and initial medical response stages for patients exposed during radiological accidents. This approach represents an advancement in managing radiological accidents by offering a more efficient and less invasive method of dose assessment.

• 대한방사선방어학회:학술대회논문집
• /
• 2011.04a
• /
• pp.100-101
• /
• 2011

• Journal of the Korean Magnetic Resonance Society
• /
• v.5 no.2
• /
• pp.73-90
• /
• 2001

Vanadium-doped H-SAPO-34 samples were prepared by a high-temperature solid-state reaction between SAPO-34 and the paramagnetic V(Ⅳ) species and characterized carefully by EPR and Electron Spin-Echo Modulation(ESEM) studies. The paramagnetic vanadium species generated in both V$_2$O$\_$5/ and VOSO$\_$4/ of SAPO-34 have the same narrow range of g value fur vanadium species assigned to VO$\^$2+/ inferred from the isotropic EPR spectrum at 293 K. The EPR and ESEM data indicate that the V(Ⅳ) species exist as a vanadyl ion either as [V(Ⅳ)]O$\^$2+/ or V$\^$4+/. The [V(Ⅳ)]O$\^$2+/ species seems to be more probable because SAPO-34 having a low negative framework charged and more positively charged species like V$\^$4+/can not be easily stabilized. Tetravalent vanadium ion in vadium-doped H- SAPO-34 can only be observed at the temperature lower than 77 K, while the vanadyl ion, VO$\^$2+/in the activated sample of VH-SAPO-34 can produce the ion even at room temperature. After the adsorption of methanol, ethanol, propanol or ethene to the VH-SAPO-34, only one molecule coordinate to [V(Ⅳ)]O$\^$2+/ was observed in EPR and ESEM spectra.

• Journal of Magnetics
• /
• v.2 no.4
• /
• pp.126-129
• /
• 1997

We have studied magnetostructural phase transitions in the perovskite-type layered structure compound (C18H37NH3)2 MnCl4 by means of electron paramagnetic resonance (EPR) and superconducting quantum interference device (SQUID) measurements. Distinct slopes were observed in the linear temperature dependences of the Mn++ EPR linewidth in the low and high temperature phases. Besides, linewidth anomalies at the transition temperatures sensitively reflect the magnetic changes arising from the MnCl6 octahedra.