• 한국의류산업학회지
• /
• 제15권3호
• /
• pp.430-436
• /
• 2013

The purpose of this study investigates the effects of electron beam(EB) irradiation on the chemical and morphological properties of Hansan ramie fiber. Hansan ramie fibers were irradiated with electron beam doses of 0, 1, 3, 5 and 10kGy. The effect of electron beam irradiation on the chemical components of fibers as well as the surface chemical and morphological properties were investigated using chemical component analysis methods based on TAPPI standards, XPS, and SEM. The results indicate that the surface layers can be removed under suitable EB irradiation doses. Alcohol-benzene extraction and lignin content increases gradually with an increase in EB irradiation and reaching a maximum at an EB dose of 3kGy, and decreases at 10kGy. The surface chemical changes measured by XPS corresponded to the chemical composition analysis results. The C1 peak and the O/C ratio decreased with the removal of the multi-layer and primary layer by EB irradiation. The SEM images show the inter-fibrillar structure etched by EB irradiation up to 5kGy. At 10kGy, the surface structure of the ramie fiber shows highly aligned and distinctive striations in a longitudinal direction. The removal of these exterior layers of the fiber was confirmed by changes in surface morphology as observed in SEM images.

• Journal of Applied Biological Chemistry
• /
• 제49권4호
• /
• pp.176-179
• /
• 2006

Electron beam irradiation was applied to examine the microbial growth and qualities of vacuum-packaged Astragalus membranaceus, a Korean medicinal herb. Samples were irradiated at dose of 2, 4, 8, 12, and 16 kGy, respectively. Microbiological data on A. membranaceus showed that populations of total bacteria, yeast and mold, total coliforms were significantly reduced with increase of irradiation dose. Populations of microorganisms in A. membranaceus were decreased by 2-3 log cycles at 8 kGy irradiation. Color measurements showed that electron beam treatment caused negligible changes in Hunter color L, a, and b values of A. membranaceus. Sensory evaluations showed that there were no significant changes among the samples. These results suggest that electron beam irradiated A. membranaceus have better microbial safety and qualities, compared with the non-irradiated control.

• 동아시아식생활학회지
• /
• 제18권6호
• /
• pp.1056-1062
• /
• 2008

To evaluate the effect of irradiation on restructured pork jerky containing paprika and Japanese apricot extracts, the quality of protein was determined in vitro based on the formation of trypsin indigestible substrate inhibitor (TIS) and the computed protein efficiency ratio (C-PER) as determined based on the protein digestibility and amino acid analysis. In addition, we compared the effects of electron beam irradiation to those of gamma irradiation. Approximately 3% of the moisture content of pork jerky was reduced in response to irradiation with 3kGy administered using an electron beam however, no additional reduction was observed in samples that were subjected to higher doses of irradiation. In addition, there were no notable differences in the crude protein and fat content of pork jerky samples that were subjected to irradiation, regardless of dose. Furthermore, the total amino acids profiles did not change in response to electron beam irradiation. However, the in vitro protein digestibility increased by 7% in response to 3kGy of electron beam irradiation and 5kGy of gamma irradiation, but no significant changes in digestibility were not observed in response to treatment with higher doses. TIS quantified as trypsin inhibitors were formed in response to irradiation using the electron beam (3kGy) and gamma rays (5kGy), although there was a slight reduction in the production of TIS inhibitors in samples irradiated with higher doses. Moreover, only samples irradiated with 10kGy (electron beam and gamma ray) showed higher TBA values than those of the control samples. Finally, the C-PERs $(2.50{\sim}2.60)$ were greater in all of the irradiated pork jerky samples than in the control samples (2.22). Taken together, these results suggest that electron beam irradiation and the incorporation of extracts (paprika and Japanese apricot) may be useful methods of improving the nutritional quality of pork jerky.

• 한국축산식품학회지
• /
• 제18권3호
• /
• pp.232-239
• /
• 1998

This experiment was conducted to investigate radurization effects of gamma ray and electron beam irradiation at 1.5 and 3.0 kGy on beef steaks during 8 days of storage at 5$^{\circ}C$. Total bacteria count, psychrotrophs, mesophiles and thermophiles were analyzed at 2 days intervals. Nonirradiated beef steak was used a scontrol Total bacteria counts, psychrotrophs, mesophiles and thermophiles of the control samples showed 3.03∼4.72 logCFU / g at 0 day and increased to 7.67∼10.90 logCFU / g during 8 days storage except thermophiles. Total bacteria counts, psychrotrophs and mesophiles of beef steaks at 8 days were significantly (p＜0.05) decreased to 3.61∼5.43 logCFU / g by gamma ray and to 3.83∼7.02 logCFU / g by electron beam irradiation at 1.5 and 3.0 kGy. Thermophiles of all irradiated samples at any dose were not detectable through 8 days storage. These results suggested that both gamma ray and electron beam irradiation were effective to extend lag phase of bacterial growth of refrigerated beef. Gamma ray irradiation was better than electron beam irradiation in terms of radurization effects of beef.

• 한국의학물리학회지:의학물리
• /
• 제31권2호
• /
• pp.9-19
• /
• 2020

Purpose: This study aims to develop a multi-purpose electron beam irradiation device for preclinical research and material testing using the research electron linear accelerator installed at the Dongnam Institute of Radiological and Medical Sciences. Methods: The fabricated irradiation device comprises a dual scattering foil and collimator. The correct scattering foil thickness, in terms of the energy loss and beam profile uniformity, was determined using Monte Carlo calculations. The ion-chamber and radiochromic films were used to determine the reference dose-rate (Gy/s) and beam profiles as functions of the source to surface distance (SSD) and pulse frequency. Results: The dose-rates for the electron beams were evaluated for the range from 59.16 Gy/s to 5.22 cGy/s at SSDs of 40-120 cm, by controlling the pulse frequency. Furthermore, uniform dose distributions in the electron fields were achieved up to approximately 10 cm in diameter. An empirical formula for the systematic dose-rate calculation for the irradiation system was established using the measured data. Conclusions: A wide dose-rate range electron beam irradiation device was successfully developed in this study. The pre-clinical studies relating to FLASH radiotherapy to the conventional level were made available. Additionally, material studies were made available using a quantified irradiation system. Future studies are required to improve the energy, dose-rate, and field uniformity of the irradiation system.

• Journal of Ginseng Research
• /
• 제22권4호
• /
• pp.252-259
• /
• 1998

Electron beam, electrically produced from an electron accelerator, was compared with gamma energy in terms of its influence on color and organoleptic qualities of ginseng powders when exposed to the energy used for their microbial decontamination. Hunter color L and b values were suitable for measuring color characteristics of ginseng powders, which were not significantly changed by the exposure to 5 to 7.5 kGy electron beam and gamma energy. Fifty percent ethanol extracts of irradiated ginseng powders at 10 key showed negligible differences from the non-irradiated control in the pattern of absorption spectra at 280∼800 am, but showed increased values in overall color difference (AE) as compared with powdered samples. Irradiation more than 10 kGy and storage at ambient temperature for 4 months caused browning of powdered samples. Irradiation at more than 10 kGy of electron beam was found a critical level to bring about appreciable changes (p<0.05) in or-ganoleptic qualities such as color and odor of sterilized samples, and red ginseng powder was more susceptible than white one to organoleptic changes by irradiation.

• 열처리공학회지
• /
• 제29권3호
• /
• pp.109-112
• /
• 2016

We have considered the influence of electron irradiation on the optical and electrical properties of $SnO_2$ thin films deposited with reactive RF magnetron sputtering. After deposition, the films electron irradiated at 300 eV shows a lower sheet resistance of $277{\Omega}/{\square}$ and the optical transmittance in a visible wave length region also influenced with the electron irradiation energy. The film that electron irradiated at 400 eV shows a higher optical transmittance of 82.6% in this study. By comparison of figure of merit, it is concluded that the post-deposition electron irradiation at 300 eV is the optimum condition for the enhancement of opto-electrcal performance of $SnO_2$ thin film in this study.

• Journal of Information Display
• /
• 제2권4호
• /
• pp.23-28
• /
• 2001

Field emission characteristics of carbon nanotubes(CNTs) on four kinds of metallic substrates have been investigated under the irradiation of a laser. The field emission measurement reveals that after laser irradiation the current was increased and new humps at the field emission current was found. The current enhancement was thought to have occurred due to the fact that the electrical contact between CNTs and metals was improved due to the irradiation of the laser.

• 열처리공학회지
• /
• 제36권4호
• /
• pp.193-197
• /
• 2023

Transparent and conducting titanium (Ti) doped indium oxide (TIO) thin films were deposited on the poly-imide (PI) substrate with radio frequency magnetron sputtering and then electron irradiation was conducted on the TIO film's surface to investigate the effect electron irradiation on the crystallization and opto-electrical properties of the films. All x-ray diffraction (XRD) pattern showed two diffraction peaks of the In₂O₂ (431) and (444) planes with regardless of the electron beam irradiation energy. In the AFM analysis, the surface roughness of as deposited films was 3.29 nm, while the films electron irradiated at 700 eV, show a lower RMS roughness of 2.62 nm. In this study, the FOM of as deposited TIO films is 6.82 × 10^-3 Ω^-1, while the films electron irradiated at 500 eV show the higher FOM value of 1.0 × 10^-2 Ω^-1. Thus, it is concluded that the post-deposition electron beam irradiation at 500 eV is the one of effective methods of crystallization and enhancement of opto-electrical performance of TIO thin film deposited on the PI substrate.

• 치과방사선
• /
• 제18권1호
• /
• pp.137-147
• /
• 1988

This study was designed to investigate the effects of irradiation on the salivary ductal cells, especially on the intercalated ductal cells of the rat parotid glands. For this study, 36 Sprague-Dawley strain rats were irradiated on the head and neck region with absorbed dose of 15Gy by Co-60 teletherapy unit, Picker's model 4M60. The conditions irradiated were that field size, SSD, dose rate and depth were 12×5㎝m, 50㎝, 222 Gy/min. and 1㎝. respectively. The experimental animals were sacrificed 1, 2, 3, 6, 12 hours and 1, 3, 7 days after the irradiation and the changes of the irradiated intercalated duct cells of the parotid glands were examined under the light and electron microscope. The results were as follows: 1. Under the light and electron microscope, the nucleus, mitochondria and secretory granules showed severe changes in the early stage after irradiation and the most severe cellular de- generations were observed 2 hours after irradiation, but the repair processes began from 6 hours after irradiation. 2. Under the electron microscope, loss of the nuclear membranes, derrangement of the chromosomes, swelling and destruction of the secretory granules, and widening of the intercellular spaces were observed after irradiation. 3. Under the light microscope, atrophy and irregular proliferation of the ductal cells, cuboidal metaplasia, hyperchromatism, and the construction or obstruction of the lumen were observed after irradiation.