• 한국방사선학회논문지
• /
• 제17권5호
• /
• pp.641-649
• /
• 2023

본 연구에서는 3D 프린팅 기술을 활용하여 제작한 차폐체의 성능을 비교 분석하여, 고에너지 전자선 치료 시 차폐체로서의 적용 가능성에 대해 알아보고자 한다. 고에너지 전자선에 대한 3D 프린팅 재료의 차폐성능 평가를 위해 실측과 몬테카를로 기반의 모의실험을 수행하였다. 첫 번째, 모의실험에 대한 신뢰성 확보를 위해 IAEA의 TRS-398 권고를 참조하여 선원항 평가를 수행하였다. 두 번째, PLA+W (93%) 재료에 대한 차폐 성능 분석을 위해 3D 프린터를 이용하여 시편을 제작하였고, 전자선 에너지에 따른 두께별 차폐율을 평가하였다. 세 번째, PLA+W (93%)와 기존 차폐체 간 차폐 성능 비교 분석을 통해 전자선 치료 시 필요한 차폐 두께를 산정하였다. 연구 결과, 첫 번째, 실측과 모의실험을 통한 선원항 평가 결과, 1% 이내의 오차로 TRS-398 권고를 만족하여 모의실험에 대한 신뢰성을 확보하였다. 두 번째, PLA+W (93%)에 대한 차폐 성능 분석 결과, 6 MeV 전자선은 3.12 mm에서 95% 이상의 차폐율을 나타냈고, 15 MeV 전자선은 10 mm 두께에서 90% 이상의 차폐율을 나타내었다. 세 번째, 모의실험을 통해 PLA+W (93%) 재료와 기존 차폐체 간 비교 분석을 통해 동일 두께 내에서 텅스텐, 납, 구리, PLA+W (93%), 알루미늄 순서로 차폐율이 높은 결과를 나타내었으며, 6 MeV 전자선은 5 mm 이상, 15 MeV 전자선은 10 mm 이상 두께에서 거의 유사한 차폐율을 나타내었다. 향후 본 연구를 통해 고에너지 전자선 치료 시 PLA+W (93%) 재료를 이용한 환자의 맞춤형 차폐체 제작을 위한 기초자료로서 활용될 수 있을 것으로 판단된다.

• 한국의학물리학회지:의학물리
• /
• 제1권1호
• /
• pp.61-68
• /
• 1990

We have designed the calculation model(AMC method) of electron output for the cut-out fieldsand studied the influence of shielding block size. The output of electron was measured in the water phantom at dmax, for 20 $\times$ 20cm$^2$ cone size electron beams from CL/1800 linear accelerator(Varian, USA), Which generates the energy of 6, 9, 12, 15 and 18MeV electron beams. The shielding blocks were rectangular or squre shaped, low melting point alloy. We can predict the output from the arbitrarily rectangular shaped block within 1% error. by using the AMC method, which considers the contribution of the collimator(block) scatter and the phantom scatter.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.1331-1334
• /
• 2004

The research on electromagnetic shielding has been advanced for military applications as well as for commercial products. Utilizing the reflective properties and absorptive properties of shielding material, the replied signal measured at the rear surface or at the signal source can be minimized. The shielding effect was obtained from materials having special absorptive properties or from structural characteristics such as stacking sequence. Recently researchers studied the electromagnetic properties of nano size particles. In this research {glass fiber}/{epoxy}/{nano particle} composites(GFR-Nano composites), was fabricated using various nano particles, and their properties in electromagnetic shielding were compared. For the visual observation of the nano composite materials, SEM(Scanning Electron Microscope) and TEM(Transmission Electron Microscope) were used. For the measurement of electromagnetic shielding, HP8719ES S-parameter Vector Network Analyser System was used on the frequency range of 8 GHz～12GHz. Among the nano particles, carbon black and Multi-Walled Carbon Nano-Tube (MWCNT) revealed outstanding electromagnetic shielding. Although silver nano particles (flake and powder) were expected to have effective electromagnetic shielding due to their excellent electric conductivities, test showed little shielding effect.

• 한국정밀공학회지
• /
• 제22권10호
• /
• pp.121-128
• /
• 2005

The research on electromagnetic shielding has been advanced for military applications as well as for commercial products. Utilizing the reflective properties and absorptive properties of shielding material, the replied signal measured at the rear surface or at the signal source can be minimized. The shielding effect was obtained from materials having special absorptive properties and structural characteristics such as stacking sequence. Recently researchers studied the electromagnetic properties of nano size particles. In this research {glass fiber}/{epoxy}/{nano particle} composites(GFR-Nano composites) was fabricated using various nano particles, and their properties in electromagnetic shielding were compared. For the visual observation of the nano composite materials, SEM(Scanning Electron Microscope) and TEM(Transmission Electron Microscope) were used. For the measurement of electromagnetic shielding, HP8719ES S-parameter Vector Network Analyser System was used on the frequency range of 8 GHz${\~}$12GHz. Among the nano particles, carbon black and Multi-Walled Carbon Nano-Tube (MWCNT) revealed outstanding electromagnetic shielding. Although silver nano particles (flake and powder) were expected to have effective electromagnetic shielding due to their excellent electric conductivities, test results showed little shielding characteristics.

• 대한방사선기술학회지:방사선기술과학
• /
• 제42권6호
• /
• pp.447-454
• /
• 2019

In order to improve and supplement the shielding method for electron beam treatment, we designed a patient-specific shielding method using a 3D printer, and evaluated the usefulness by comparing and analyzing the distribution of electron beam doses to adjacent organs. In order to treat 5 cm sized superficial tumors around the lens, a CT Simulator was used to scan the Alderson Rando phantom and the DICOM file was converted into an STL file. The converted STL file was used to design a patient-specific shield and mold that matched the body surface contour of the treatment site. The thickness of the shield was 1 cm and 1.5 cm, and the mold was printed using a 3D printer, and the patient customized shielding block (PCSB) was fabricated with a cerrobend alloy with a thickness of 1 cm and 1.5 cm. The dosimetry was performed by attaching an EBT3 film on the surface of the Alderson Rando phantom eyelid and measuring the dose of 6, 9, and 12 MeV electron beams on the film using four shielding methods. Shielding rates were 83.89%, 87.14%, 87.39% at 6, 9, and 12 MeV without shielding, 1 cm (92.04%, 87.48%, 86.49%), 1.5 cm (91.13%, 91.88% with PSCB), 92.66%) The shielding rate was measured as 1 cm (90.7%, 92.23%, 88.08%) and 1.5 cm (88.31%, 90.66%, 91.81%) when the shielding block and the patient-specific shield were used together. PCSB fabrication improves shielding efficiency over conventional shielding methods. Therefore, PSCB may be useful for clinical application.

• 방사선산업학회지
• /
• 제4권1호
• /
• pp.33-38
• /
• 2010

The MCNP5 neutron, electron, photon Monte Carlo transport program was installed on the KISTI's SUN Tachyon computer using the parallel programming. Electron beam accelerators were modeled and shielding calculations were performed in order to investigate the reduction of computation time in the supercomputer environment. It was observed that a speedup of 40 to 80 of computation time can be obtained using 64 CPUs compared to an IBM PC.

• 한국방사선학회논문지
• /
• 제15권7호
• /
• pp.949-956
• /
• 2021

본 연구의 목적은 전자빔 치료에서 산란선을 차폐하는 데 사용되는 납의 단점을 극복하기 위한 대체 재료로 텅스텐 나노입자를 선택하여 고선량에서 발생하는 산란선에 차폐 효과가 있는지 여부를 평가하는 것이다. 선량계의 위치와 조사야의 크기를 일정하게 설정하기 위해 판을 자체 제작하였다. 유리 선량계는 10 × 10 cm² 크기의 조사야의 중앙에서 십자로 1, 2, 4 cm 떨어진 지점에 위치하여 12곳의 지점에 위치시켰다. 10 × 10 cm² 크기의 텅스텐 나노입자 차폐체를 0.4, 0.75, 1 mm의 소재로 두께 0.75 mm에서 최대 두께 4.0 mm의 총 12가지 유형의 차폐가 적용되었다. 선형가속기를 사용해서 6 MeV에서 4회, 12 MeV에서 4회 측정하였고 선량의 세기는 100 MU로 조사하였다. 실험 결과 조사야로부터 1 cm 거리에서 4 mm 차폐판이 가장 높은 차폐 효과를 보였다. 조사야로부터 2 cm 거리에 적용된 1 mm 차폐판이 차폐 효과가 가장 낮았다. 텅스텐 차폐판의 두께가 두꺼워짐에 따라 전자선 차폐 효과는 급격히 증가하였다. 결론적으로 텅스텐 나노입자는 전자빔 치료에서 납의 대체 재료로 사용이 가능함을 확인하였다.

• 펄프종이기술
• /
• 제38권4호
• /
• pp.68-75
• /
• 2006

Electromagnetic shielding sheet using the carbon and wood fiber mixture was manufactured in an effort to develop an electromagnetic shielding packaging material. Carbon fibers were cut into 5, 10, and 15 mm using the automatic cutting device and blown and dispersed using compression air passed through the fine nozzle. Then carbon fibers were slurried with water (0.1% consistency), and softwood kraft pulp along with cone starch were added. The wet mats were manufactured by dewatering in modified hand-sheet machine. The wet mats were pressed upto $4kgf/cm^2$ in the carbon and wood fiber mixture mat press. The wet mats were dried in the automatic controlled plate dryer. Investigation on the formation and surface structure of the newly developed carbon and wood fiber mixture electromagnetic shielding sheet were carried out using the scanning electron microscopy and the image analyzer. Finally electromagnetic shielding characteristics of the newly developed carbon and wood mixture sheet were measured using net-work analyser. The result was promising in the light of the fact that this method could open a new way to substitute the expensive imported electromagnetic shielding sheet.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제49권5호
• /
• pp.291-296
• /
• 2000

Recently large size color TV and computer monitor are very popular and a lot techniques are being developed to get a high quality picture on the screen through reducing the convergence error among the red, green and blue beams and achieving a high focusing. One of the techniques is considering the mutual effects of the components of the Brown tube. The magnetic deflection yoke, especially, stands immediately next to the electron gun and generates the leakage magnetic fields at the electron gun which affects the trajectories of the electron beams inside the gun. Hence a shield cup made of thin conducting plate is located at the end of electron gun in order to shield the leakage flux from the deflection yoke. Since the red, green and blue beams are placed unsymmetrically the shielding effects of the shield cup on the beams are not same and eddy current controller, made of thin conducting plate, is auxiliary placed inside the shield cup. In this paper a transient magnetic field analysis algorithm is developed using boundary element method, and applied to the analysis of the shielding effects of the eddy current controller of shield cup in an electron gun.

• 대한방사선치료학회지
• /
• 제14권1호
• /
• pp.89-94
• /
• 2002

I. 목적 : Sebaceous gland carcinoma, Squamouse cell ca., basal cell ca., low grade MALToma 등에서 전자선을 이용하여 eyelid 치료시 안구의 선량은 될 수 있는 한 최소선량으로 관리되어야 한다. 그러나 upper나 lower eyelid 전부를 포함하는 조사면은 치료후 백내장등의 심각한 부작용을 만들어 낼 수 있다. 본원에서는 상용되는 Tungsten eyeball shielding block과 기존의 lead block에 의한 차폐시 안구의 선량을 비교하여 Tungsten eyeball shielding block의 유용성에 대해 평가해 보고자한다. 2. 재료 및 방법: 시판되고 있는 BOLX-I 물질을 이용하여 모형안구를 제작하고 안구의 6곳 주요지점을 선정한 후 TLD chip을 이용하여 주로 사용되는 6MeV와 9MeV electron beam의 선량을 측정, Tungsten eyeball shielding block과 lead block의 선량을 비교하였다. 3. 결과 : Tungsten eyeball shielding block의 사용이 안구의 주요 지점인 각막, 망막, 시신경부위의 선량을 lead block사용 때보다 $90\%$에서 $50\%$의 감소효과가 있었다. 4. 결론 : Tungsten eyeball shielding block은 6MeV 전자선 치료시 보다 뛰어난 차폐효과를 보여 임상에서의 유용성이 인정되었다. 그러나 안구에 삽입시 환자의 고통과 불쾌감을 줄일 수 있는 방안이 모색되어야 하는 숙제를 남겼다.