• 한국정밀공학회지
• /
• 제22권7호
• /
• pp.177-184
• /
• 2005

Recently, the engineering designer of injection mould has become more and more dependent on the CAE. In the design factors of injection mould, the shrinkage rate should be considered as one of the important performances to produce the reliable products. therefore the shrinkage rate can be mostly calculated by the MoldFlow and Pro-engineering. in the design process. However it is not easy to predict the shrinkage rate of a plastic injection mold in its design process because the analysis can take minutes to hours, the high computational costs of performing the analysis limit their use in design optimization. In this study, the surrogate models, DACE model, based on the Kriging in order to optimize the shrinkage rate of electric microwave oven window is used in lieu of the original models, facilitating design optimization.

• 한국진공학회지
• /
• 제9권3호
• /
• pp.290-295
• /
• 2000

KAIST-TOKAMAK에서 재현성이 좋은 저항가열 플라즈마를 발생시키는데 필요한 전이온화(pre-ionization)에 응용하기 위해 2.45 GHz 마그네트론을 사용하여 간편한 마이크로파 발생장치를 개발하였다. 장치에 사용한 마그네트론은 출력 500 W, 주파수 2.45 GHz이며, 일반적인 가정용 전자오븐(microwave oven)에 사용된다. 기존의 가정용 마그네트론은 음극(cathode)과 양극(anode)사이에 걸리는 고전압이 60 Hz의 주기를 갖기 때문에 약 16ms마다 약 8 ms 동안만 주기적으로 마이크로파를 발생한다. 이 마그네트론을 사용하여 토카막 전이온화에 충분할 정도로 연속적으로 발생되는 마이크로파를 얻기 위해서 음극과 양극사이에 개량된 회로로 리플전압이 작은 DC 고전압(5 kV 1 A)을 인가하였다. 본 논문에서는 주기적으로 생성.소멸하는 ECH 플라즈마와 연속적인 ECH 플라즈마를 발생시켜 랑뮈어탐침과 광증배관(PMT)을 이용한 이온 포화전류와 $H_\alpha$/ 방출(emission)을 측정하여 마이크로파 발생장치의 특성을 조사하였다.

• 폴리머
• /
• 제25권5호
• /
• pp.609-616
• /
• 2001

본 연구에서는 copper phthalocyanine (CUPc)을 높은 합성 수율로서 성공적으로 합성시킴에 따라 용매를 사용하는 고분자의 합성 분야에 마이크로파 기술의 응용 가능성을 제시하고자 하였다. 가정용 전자레인지의 용기를 개조시키고 마이크로파 출력 조절기를 부착시키는 방법으로 본 실험에 사용되는 가변식 마이크로파 합성 장치를 자체 제작하였다. 화학 분석법, X선 회절장치(XRD), 주사형 전자현미경 (SEM) 및 입도 분석법 (PSA)을 이용하여 재래식 열 공정 및 마이크로파 공정을 사용하여 여러 조건하에서 합성된 시료들의 특성을 비교 분석하였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.864-869
• /
• 2004

It is net easy to predict the shrinkage rate of a plastic injection mold in its design process. The shrinkage rate should be considered as one of the important performances to produce the reliable products. The shrinkage rate can be determined by suing the CAE tools in the design produces. However, since the analysis can take minutes to hours, the high computational costs of performing the analysis limit their use in design optimization. In this study, the surrogate models based on the DACE is used in lien of the original models, facilitating design optimization.

• Journal of Electrochemical Science and Technology
• /
• 제12권3호
• /
• pp.297-301
• /
• 2021

Microbial fuel cells (MFCs) convert chemical energy to electrical energy via electrochemically active microorganisms. The interactions between microbes and the surface of a carbon electrode play a vital role in capturing the respiratory electrons from bacteria. Therefore, improvements in the electrochemical and physicochemical properties of carbon materials are essential for increasing performance. In this study, a microwave and sulfuric acid treatment was used to modify the surface structure of graphite granules. The prepared expandable graphite granules (EGG) exhibited a 1.5 times higher power density than the unmodified graphite granules (1400 vs. 900 mW/m³). Scanning electron microscopy and Fourier transform infrared spectroscopy revealed improved physical and chemical characteristics of the EGG surface. These results suggest that physical and chemical surface modification using sulfuric acid and microwave heating improves the performance of electrode-based bioprocesses, such as MFCs.

• 한국결정성장학회지
• /
• 제8권3호
• /
• pp.513-517
• /
• 1998

석탄회의 점노를 70:30의 비율로 혼합하여 마이크로파를 이용하여 소결하였으며, 소결에는 2.45Ghz의 일반가정용 마이크로파 오븐을 사용하였다. 시편은 $1,150^{\circ}C$에서 50분까지 10분 간격으로 소결하였다. 석탄회의 미세구조는 주사전자현미경(SEM)과 Energy dispersive spectrometry(EDS)를 이용하여 분석을 하였으며 X선회절 분석과 압축강도와 겉보기 비중을 추정하여 비교하였으며 시간이 지날수록 시편의 기공크기는 작아졌으나 압축강도와 겉보기 비중은 변화의 크기가 작았다. 로안에서의 마이크로파에 의한 시편으로의 열전달현상을 알아보기 위하여 컴퓨터를 이용한 수치해석을 행하였다.

• 대한화학회지
• /
• 제47권6호
• /
• pp.591-596
• /
• 2003

아미노싸이에노피리다진(1a, b)과 아미노싸이에노쿠마린(2)은 DMFDMA와 축합반응을 하여 아미딘(3a, b)을 형성한다. 이 화합물들을 N-페닐말레이마이드와 반응시키면 화합물 9와 10이 얻어진다. 반면에 3a, b, 4, 18, 19, 20을 말레산 무수물과 반응시키면 포밀 유도체인 5a, b, 6, 21, 22, 23 들이 얻어진다. 아미딘 화합물 3a, b 를 다이에틸 퓨마레이트와 반응시키면 가수분해산물인 아미딘 14를 거쳐 11이 얻어진다. N-페닐말레이마이드를 마이크로웨이브 오븐에서 반응시키면 [2+2]와 [2+2+2] 고리첨가반응 산물이 얻어진다.

• The Journal of Advanced Prosthodontics
• /
• 제9권5호
• /
• pp.394-401
• /
• 2017

PURPOSE. The purpose of this study was to compare the optical properties of pre-colored dental monolithic zirconia ceramics of various thicknesses sintered in a microwave and those in a conventional furnace. MATERIALS AND METHODS. A2-shade of pre-colored monolithic zirconia ceramic specimens ($22.0mm{\times}22.0mm$) in 3 thickness groups of 0.5, 1.0, and 1.5 mm were divided into 2 subgroups according to the sintering methods (n=9): microwave and conventional sintering. A spectrophotometer was used to obtain CIELab color coordinates, and translucency parameters and CIEDE2000 color differences (${\Delta}E_{00}$) were measured. The relative amount of monoclinic phase ($X_m$) was estimated with x-ray diffraction. The surface topography was analyzed by atomic force microscope and scanning electron microscope. Statistical analyses were conducted with two-way ANOVA (${\alpha}=.05$). RESULTS. There were small interaction effects on CIE $L^*$, $a^*$, and TP between sintering method and thickness (P<.001): $L^*$ (partial eta squared ${{\eta}_p}^2=0.115$), $a^*$ (${{\eta}_p}^2=0.136$), and TP (${{\eta}_p}^2=0.206$), although higher $b^*$ values were noted for microwave sintering regardless of thickness. Color differences between two sintering methods ranged from 0.52 to 0.96 ${\Delta}E_{00}$ units. The $X_m$ values ranged from 7.03% to 9.89% for conventional sintering, and from 7.31% to 9.17% for microwave sintering. The microwave-sintered specimen demonstrated a smoother surface and a more uniform grain structure compared to the conventionally-sintered specimen. CONCLUSION. With reduced processing time, microwave-sintered pre-colored dental monolithic zirconia ceramics can exhibit similar color perception and translucency to those by conventional sintering.

• Nuclear Engineering and Technology
• /
• 제48권5호
• /
• pp.1219-1229
• /
• 2016

The present paper reports on a trial to shed further light on the characterization, applications, and operation of radar speed guns or Gunn diodes on different radiation environments of neutron or g fields. To this end, theoretical and experimental investigations of microwave oscillating system for outer-space applications were carried out. Radiation effects on the transient parameters and electrical properties of the proposed devices have been studied in detail with the application of computer programming. Also, the oscillation parameters, power characteristics, and bias current were plotted under the influence of different ${\gamma}$ and neutron irradiation levels. Finally, shelf or oven annealing processes were shown to be satisfactory techniques to recover the initial characteristics of the irradiated devices.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.223-226
• /
• 2004

It is net easy to predict the shrinkage rate of a plastic injection mold in its design process. The shrinkage rate should be considered as one of the important performances to produce the reliable products. The shrinkage rate can be determined by suing the CAE tools in the design produces. However, since the analysis can take minutes to hours, the high computational costs of performing the analysis limit their use in design optimization. In this study, the surrogate models based on the RSM is used in lien of the original models, facilitating design optimization.