• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집 Vol.3 No.2
• /
• pp.785-787
• /
• 2002

Conductivity and transmittancy of ZnO is very excellent and the price is low. So the study of transparent electrode materials and electromagnetic wave shielding wall is actively in progress. We add $Al_2O_3$(0.0, 2.0, 3.0, 5.0wt%) to ZnO and observe microscopic structure and conductivity. For XRD observation, Al peak of AZO is increased by increasing the amount of $Al_2O_3$. We observe that the size of grain is reduced by increasing the liquid phase of grain boundary to SEM observation. Conductivity of AZO is increased by increasing the amount of $Al_2O_3$. We confirm the application possibility of the materials for electromagnetic wave reflection materials.

• 한국전자파학회지:전자파기술
• /
• 제6권2호
• /
• pp.19-26
• /
• 1995

광대역용 박판 전파흡수체의 설계에는 자성재료가 많이 사용되며, 주로 자성재료 박판의 이면에 금속판을 접착하여 만든다. 이 경우,6개의 변수를 포함하는 한개의 이론식에 의해 무반사 또는 보다 실용적인 99% 이상의 흡수(20dB 전파감소)가 가능한 전파흡수체의 형상과 재료 및 전자파 상수가 정의된다. 2여B 전파감소에 해당 하는 정합 경제값을 계산하기 위하여 Secant법을 적용하였으며, 전파흡수체 설계시 허용 가능한 재료 상수값의 범위를 구하기 위하여 Secant볍을 응용한 search algorithm을 개발하였다. 6개의 변수 모두에게 적용할 수 있 는 이 수치해석 방법에 의해 최소의 반복 계산으로 정확한 값을 효율적으로 구할 수 있었다.

• 한국항해학회지
• /
• 제23권1호
• /
• pp.23-28
• /
• 1999

With a rapid progress in electronic industry we enjoy various conveniences of life. As many kinds of information equipments are supplied even to most of individuals as to be called an information society, we are exchanging much information with one another surprisingly. Consequently the occupation density of microwave frequency band is highly increased, and electromagnetic environment is getting more seriously bad. It often gives fatal blow to even human life and thus becomes serious social problems. Electromagnetic wave absorbers for anechoic chamber are needed to broaden the effective frequency bandwidth, reduce the thickness, and decrease the weight. There are various absorbers proposed for the above conditions, but they could not decisively solve it the alone requirements. The Electromagnetic wave absorber made by a conventional ferrite tile has, for example, broadened the useful frequency bandwidth by the way of forming air layer(practically use urethane foam, etc.) on the ferrite tile. Therefore, an air layer is formed between a reflection plate and a sintered Ni-Zn ferrite tile of 7 mm in thickness, which has reflectivity less than -20 dB from 30 MHz to 400 MHz in bandwidth. Accordingly, in this paper, a broadened electromagnetic wave absorber are designed, which has the reflection characteristics less than -20 dB from 30 MHz to 6,000 MHz in the bandwidth. Then we achieved the goal by design the inserting square Ferrite Cylinders with the thickness less than 17.5 mm on existing grid type Ferrite absorber. The purpose of this research is on the development of very wide-band electromagnetic absorber for a universal anechoic chamber for measuring radiated electromagnetic wave or immunity of electronic equipments, GTEM-cell, wall material for preventing TV ghost, etc.

• 한국전자파학회지:전자파기술
• /
• 제4권2호
• /
• pp.17-23
• /
• 1993

본 논문은 종단단락형 $20 mm\phi$ 동축관을 이용하여 전자파흡수체로 제작된 샘플들의 반사감쇠량과 재료 정수를 측정하는 것이 목적이다. 저자는 One port method에 의한 재료정수의 산출 알고리즘을 제안하고, 슬 에 의한 실험치와 계산치가 잘 일치함을 보임으로써 제안한 측정법의 타당성을 입증하였다. 이 측정법은 전파흡수체 설계와 특성평가에 유효하게 사용될 것이다.용될 것이다.

• 전자공학회논문지
• /
• 제50권4호
• /
• pp.26-32
• /
• 2013

전력선에 의한 전자유도 환경에서 가장 보편적 영향 요인이라 할 수 있는 대지의 유도전압 감쇠 효과에 대하여 분석하였다. 전력선은 원통좌표계의 라인소스로 표현되고 계의 분석은 베셀함수와 웨이브 트랜스포메이션에 의한 이의 변형 적용을 통하여 해석된다. 라인소스로부터 방사된 전자계는 지표면에서 반사되어 관측점의 피유도원 매체에 합성되는데 이것의 영향을 알기 위하여 본 논문에서는 베셀함수에 의한 지면 반사계수를 직접 구하여 산출하도록 적용하였다. 본 논문에서 설계된 통상의 유도 환경의 배치 관계에 따르면 지면반사에 의한 원천 유도원 전압과의 합성 효율은 유도전압을 감쇠시키는 차폐효과로서 60~70%정도의 범위를 나타내었다.

• 한국전기전자재료학회논문지
• /
• 제23권10호
• /
• pp.798-803
• /
• 2010

This paper describes the characteristics of electromagnetic wave propagation in power transformer. A transformer which is similar to 154 kV single phase on-site transformer unit was provided for the purpose of the experiment. The 12 dielectric windows on the transformer enclosure to install UHF (ultra high frequency) sensors and the full scale mock ups of winding and the core were also equipped in the transformer. Every sensors to be installed to the transformer was tested and verified whether they show same characteristics or not before the experiment. A discharge gap which was used as a PD (partial discharge) source moved to several necessary locations in the transformer to simulate dielectric defects. Propagation times of electromagnetic wave signal from PD source to sensors decided by the routes of both reflection phenomenon and diffraction phenomenon were compared each other. The experimental results showed propagation route of the PD signal makes an effect on the frequency spectrum of front part of the signal and the magnitude of the signal and propagation time of the signal when the signal is captured on the sensor.

• 한국항해항만학회지
• /
• 제27권1호
• /
• pp.75-80
• /
• 2003

천연세라믹, 옻칠, 그리고 고무의 전파흡수능을 조사하였다. 천연세라믹은 2.5GHz~4.5GHz의 주파수 범위에서 2.5dB이상의 전파흡수능을 나타내었으며 옻칠의 전파흡수능이 기존에 전파흡수체의 지지재로 이용되는 고무에 비해 우수한 전파흡수능을 갖고 있음을 확인하였다. 페라이트에 옻칠을 지지재로 이용한 전파흡수체에 대하여 시뮬레이션 한 결과 0.5GHz~10GHz의 주파수 범위에서 16dB 이상의 우수한 전파흡수능을 나타내었다. 따라서 기종에 지지재로 이용하던 고무대신 본 연구에서 새롭게 제안하는 옻칠을 전파흡수체의 지지재로 이용하는 것이 광대역에서 우수한 전파흡수체를 얻을 수 있을 것으로 예상된다.

• Journal of electromagnetic engineering and science
• /
• 제18권2호
• /
• pp.78-87
• /
• 2018

This paper describes specular reflectance measurements of dielectric plates in three waveguide frequency bands: D-band (110-170 GHz), G-band (140-220 GHz), and J-band (220-325 GHz). The transmit (Tx) part of the proposed specular reflectance measurement system is stationary, while the receive (Rx) part and the material under test (MUT) holder are concentric-rotating with a 2:1 speed ratio for specular reflectance measurements. In specular reflectance measurements, the first step measures the specular reflection coefficients of an MUT and a metal plate on the MUT holder located at the center of the Tx and Rx parts, and the second step calculates the specular reflectance defined by the specular reflection power (i.e., intensity) of the MUT normalized to that of the metal plate. Multiple reflection effects between the Tx and Rx antennas and the MUT on the measured specular reflectance are minimized by averaging out the multiple specular reflectances measured with changing the separation distance between the two antennas by ${\lambda}/8$ intervals. Measurement results of the perpendicular-polarized specular reflectance of commonly used dielectric plates are verified by comparing those with the analytic results and show that the results measured over the overlapped frequency range of the D-/G-bands and at the boundary frequency of the G-/J-bands agree well with the results for the other band, respectively.

• 한국통신학회논문지
• /
• 제22권4호
• /
• pp.605-610
• /
• 1997

An analysis method for the electromagnetic scattering of a Tm polarized plane wave from a periodic strip grating over a grounded dielectric slab is considered from the viewpoint of reflection grating problem. The parameters of strip gratings showing Bargg and Off-Bragg blazing phenomena at the frequency of 10GHz are derived teoretically. The strip grating structure is implemented using Aluminum plate(groung conductor), paraffin(dielectric material.epsilon.$_{r}$=2.24), and copper(strip conductor0.08m thickness). The experimental results(reflection power) of Bragg as well as Off-Bragg blazing phenomenon for TM polarized plane wave have been compared with the theoretical results and fairly good agreements between theory and experiment have been observed.d.

• International Journal of Aeronautical and Space Sciences
• /
• 제18권2호
• /
• pp.215-221
• /
• 2017

An electromagnetic (EM) wave absorber reduces the possibility of radar detection by minimizing the radar cross section (RCS) of structures. In this study, a radar absorbing structure (RAS) was applied to the leading edge of a blended wing body aircraft to reduce RCS in X-band (8.2~12.4GHz) radar. The RAS was composed of a periodic pattern resistive sheet with conductive lossy material and glass-fiber/epoxy composite as a spacer. The applied RAS is a multifunctional composite structure which has both electromagnetic (EM) wave absorbing ability and load-bearing ability. A two dimensional unit absorber was designed first in a flat-plate shape, and then the fabricated leading edge structure incorporating the above RAS was investigated, using simulated and free-space measured reflection loss data from the flat-plate absorber. The leading edge was implemented on the aircraft, and its RCS was measured with respect to various azimuth angles in both polarizations (VV and HH). The RCS reduction effect of the RAS was evaluated in comparison with a leading edge of carbon fabric reinforced plastics (CFRP). The designed leading edge structure was examined through static structural analysis for various aircraft load cases to check structural integrity in terms of margin of safety. The mechanical and structural characteristics of CFRP, RAS and CFRP with RAM structures were also discussed in terms of their weight.