• 한국전자파학회논문지
• /
• 제17권10호
• /
• pp.935-942
• /
• 2006

본 논문에서는 직렬 커패시터를 넓은 면 결합 SSS로 구현하는 새로운 이론이 제안되었다. 제안된 이론은 기모드 해석 방법만이 적용되었기 때문에 비교적 단순하지만 선로의 프린징 전자장 영향에 의한 유효 선로 폭과 선로 끝 효과를 고려함으로서 신뢰할 만한 결과를 제공한다. 이상적인 집중 소자 커패시터와 결합 선로 커패시터의 특성을 비교, 분석하기 위해 시뮬레이션 결과가 제시되었다. 또한 제안한 이론을 근거로 하여 커패시티브갭 결합 선로 대역 통과 필터가 설계 및 제작되었고, 그 결과로부터 이론의 타당성이 검증되었다.

• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2001년도 종합학술발표회 논문집 Vol.11 No.1
• /
• pp.332-336
• /
• 2001

The new RST is recently developed by the product expansion of the scattering functions in the field of acoustics. The new formulation suggests that the scattering coefficients consist of resonance, non-resonance, and their interactional components. In the scattering problems of acoustic waves, the moduli and phase of the resonance coefficient are obtained the appropriate results through the new RST. In our recent works the new RST was successfully applied to the scattering problem of electromagnetic waves for coated conducting cylinder and sphere. In this paper, the new RST is applied to the 2-dimensional scattering problem of electromagnetic waves for a homogeneous dielectric cylinder, and the numerical results are compared with the previous RST.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2003년도 가을 학술발표회 논문집
• /
• pp.395-402
• /
• 2003

In this paper, we try to analyze the torque of electromagnetic clutch by using FEM. For Analysis of the magnetostatic field, we constitute axi-symmetric FEM model of an electromagnetic clutch. By resorting to the theory of magnetic circuits, we obtain a solution of theoretical torque to compare with the result of numerical analysis. From the result of numerical analysis, the air gap of electromagnetic clutch between armature and rotor is important to influence on the torque and the torque changes with the air gap of 0.2mm∼0.1mm Also we observe the characteristic of the torque by changing the relative permeability of each parts. Finally an optimized design of the electromagnetic clutch is proposed.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제54권4호
• /
• pp.163-173
• /
• 2005

The conventional optimization study for electromagnetic systems has been mostly on the shape or size optimization. The goal for these optimization methods is to improve performance of electromagnetic systems by optimizing the interface shape of two different materials while their given layout or initial topology are held. The feasible topology can be diverse and an appropriate topology will give much better design results. In this paper we propose a theory and an algorithm for topology optimization of electromagnetic systems, which are based on the finite element method. The topology optimization technique employes a direct searching method of sensitivity analysis in which the information of material sensitivity is used. Two numerical examples of a switched reluctance motor and an electrostatic actuator of MEMS are tested and their design results show that the optimization method is valid and useful for the topology and basic layout design of electromagnetic systems.

• Journal of electromagnetic engineering and science
• /
• 제16권4호
• /
• pp.219-224
• /
• 2016

In this paper, coupled-mode theory (CMT) is used to obtain a transient solution analytically for a wireless power transfer system (WPTS) when unit energy is applied to one of two resonators. The solutions are compared with those obtained using equivalent circuit-based analysis. The time-domain CMT is accurate only when resonant coils are weakly coupled and have large quality factors, and the reason for this inaccuracy is outlined. Even though the time-domain CMT solution does not describe the WPTS behavior precisely, it is accurate enough to allow for an understanding of the mechanism of energy exchange between two resonators qualitatively. Based on the time-domain CMT solution, the critical coupling coefficient is derived and a criterion is suggested for distinguishing inductive coupling and magnetic resonance coupling of the WPTS.

• 한국전자파학회논문지
• /
• 제12권3호
• /
• pp.346-351
• /
• 2001

CATV, DBS(Direct Broadcasting Satellite) 및 CS (Communication Satellite) 시스템용 신호분기기의 새로운 해석법을 제안하였다. 본 논문에서는 결합선로형 방향성 결합기에 대한 우.기 모드 해석법을 변성기형 방향성 결합기에 적용하였다. 측정된 우.기 모두 반사계수만을 사용하여 S-파라미터의 결과와 계산치를 비교함으로써 제안된 해석법의 타당성을 입증하고, 제안된 해석법을 적용하여 설계.제작한 신호분기기는 5MHz~4,000MHz까지 광대역화되었다.

• Journal of electromagnetic engineering and science
• /
• 제1권1호
• /
• pp.95-99
• /
• 2001

According to the progress of the electronic industy and radio communication technologies, mankind might enjoy its abundant life On the other hand, many social problems such as EMI, and unnecessary electromagnetic wave occur due to the increased use of electromagnetic wave. Therefore, the organiztions such as CISPR, FCC, ANSl,etc. have provided the standard of electromagnetic wave enviroment for the countermeasure of the EMC. It had been required that the absorbing ability of an electromagnetic wave absorber is more than 20 dB, the bandwidth of which is required through 30 MHz to 1,000 MHz for satisfying the international standard about an anechoic chamber for EMI/EMS measurment. From November of 1998, however, the CISPRll has accepted the extended frequency band from 1 GHz to 18 GHz additionally in the bandwidth of EMI measurementent$^{[1]}$ . In this paper, we proposed a new type absorber satisfying the above requirements and carried out broadband design using the equivalent material constants method. Futheremore, the experiments were carried out over the frequency band from 30 MHz to 2 GHz, and hence, the validity of the proposed design theory was confirmed.

• Journal of Electrical Engineering and Technology
• /
• 제9권3호
• /
• pp.866-872
• /
• 2014

The purpose of this paper was to find an effective method for measuring electromagnetic torque produced by a brushless DC motor with single-phase current sensing in real-time. A torque equation is derived from the theory of brushless DC motor. This equation is then validated experimentally with a motor dynamometer. A computer algorithm is also proposed to implement the electromagnetic torque estimation equation in real-time. Electromagnetic torque is a linear function of phase current. Estimating the electromagnetic torque in real-time using single-phase current is not appropriate with existing equations, however, because of the rectangular alternating-pulse nature of the excitation current. With some mathematical manipulation to the existing equations, the equation derived in this paper overcame this limitation. The equation developed is simple and so it is computationally efficient, and it takes only motor torque constant and single-phase current to evaluate the electromagnetic torque; no other parameters such as winding resistances, inductances are needed. The equation derived is limited to the three-phase brushless DC motor. It can, however, easily be extended to the multiphase brushless DC motor with the technique described in this paper.

• 대한치과교정학회지
• /
• 제24권4호
• /
• pp.897-916
• /
• 1994

The biologic potential, which is different from the piezoelectric signals, relates tooth movement at least in part to changes in bone metaboliosm in bioelectric theory. The purpose of this experiment was to determine wheather the application of half sine-wave pulsed electromagnetic fields (HSPEMF) could increase both the rate and amount of orthodontic tooth movement. Forty-three male Hartley guinea pigs, weighting approximately 255g, were utilized in this study. The animals were 35 days old at the start of the study. Laterally directed orthodontic force was applied to the maxillary central incisors of 40 Hartley guinea pigs (20 experimental, 20 control). According to the amount of orthodontic force (6g, 12g), they were divided into two sub-groups (10 experimental I, 10 experimental II, 10 control I, 10 control II). During the experimental period, experimental animals were placed in plastic animal holders with their heads positioned in an area of uniform electromagnetic field. Control animals were placed in similar plastic holders that did not carry the electric apparatus. The results were as follows : 1. The application of a HSPEMF to the experimental groups significantly increase the final amount of orthodontic tooth movement observed over a 10-day experimental period. 2. The application of a HSPEMF to the experimental groups significantly increase the velocity of orthodontic tooth movement observed over a 10-day experimental period. 3. There was no significant difference in the final amount of orthodontic tooth movement at the fourth day to the eighth day, but there was significant difference in the final amount of orthodontic tooth movement at the nineth, tenth day during a 10-day experimental period. 4. After 10 days of HSPEMF exposure & orthodontic force, the experimental groups demonstrated more osteodasts in the pressure side than control groups.

• 한국전자파학회논문지
• /
• 제28권2호
• /
• pp.155-158
• /
• 2017

전자, 통신 기술의 발달로 대부분의 장소에서 전자기기가 존재한다. 자동차, 열차, 항공기 등 다양한 장소에서 전자기기의 활용이 증가된 만큼 고출력 전자기파로 인한 오작동과 하드웨어의 치명적인 손상을 확인할 수 있는 안전성을 연구하는 것이 중요하게 되었다. 구조물 내부에 전자기기 및 여러 센서를 연결하는 케이블은 전자기파에 의한 오작동을 초래할 수 있는 원인 중 하나이기 때문에 전자파 영향에 대한 해석이 필수적이다. 본 논문에서는 상관관계 함수와 전송이론을 이용하여, 전기적으로 큰 공진기 내부에 존재하는 케이블에 유기되는 전류를 계산해 외부 전자기파에 의한 영향을 해석하였다.