• 전기학회논문지
• /
• 제59권2호
• /
• pp.318-327
• /
• 2010

This paper deals with analysis on dynamic characteristic and circuit parameter of linear switched reluctance motor by electromagnetic analytical method. Above all, using space harmonic method, which is electromagnetic method, the air-gap flux density is analyzed in the both align and unaign positions, and the inductance profile, force characteristic and resistance per phase are calculated by means of the process. The validity of the analyzed results are demonstrated by the finite element method(FEM) and manufacture of the prototype machine. Second, the dynamic simulation is analyzed by the use of circuit parameters derived from analytical method, and the operating system of the prototype machine is manufactured to demonstrated the validity of simulation analysis. As a result, it is considered that the characteristic equation suggested in this paper will contribute to the design, analysis and application of LSRM.

• 한국전자파학회논문지
• /
• 제14권4호
• /
• pp.421-430
• /
• 2003

본 논문에서는 휴대폰 개발 초기단계에서부터 SAR(Specific Absorption Rate)를 고려할 수 있는 방법을 제안하였다. 먼저, 휴대폰의 폴딩 각도를 150$^{\circ}$에서 142$^{\circ}$까지 변화시키면서 SAR값을 계산하였다. 계산결과 폴더 각도가 작아질수록 SAR값이 감소함을 알 수 있었고, 142$^{\circ}$일 때 측정결과와 약 3.95 %의 오차가 있었다. EMI (Electromagnetic Interference) 방지 도료의 분포패턴을 변화시켜가면서 SAR값을 측정한 결과, 분포패턴이 다를 경우 SAR값이 다름을 알 수 있었다. 안테나 급전점 근처의 EMI 방지 도료를 제거할 경우 SAR 감소효율이 15.46 % 이었으며, 도료를 지그재그 패턴으로 분포시킬 경우 SAR 감소효율이 가장 크게 나타남을 알 수 있었다.

• IEIE Transactions on Smart Processing and Computing
• /
• 제5권1호
• /
• pp.63-69
• /
• 2016

This paper presents methods to improve the effectiveness of electromagnetic shielding. The slit appears in an enclosure's surface to ventilate. Slits may also appear due to power supply lines or to serve as a communication link between electronic circuits inside and outside the box. We simulated electromagnetic radiation in different conditions in order to propose a method to improve the effectiveness of electromagnetic shielding to ensure electromagnetic compatibility using CST software (Computer Simulation Technology).

• Journal of Electrical Engineering and Technology
• /
• 제9권5호
• /
• pp.1724-1728
• /
• 2014

Heat sink has been used to help an electrical device operate in normal temperature condition. But heat sink radiates unwanted electromagnetic wave, which may cause electromagnetic interference problem. A resistance loaded grounding technique is proposed to reduce electromagnetic wave radiation by a heat sink. Numerical simulations are accomplished to find optimal loading resistance. Also electromagnetic fields radiated by from a heat sink are measured and compared with the simulation results. The test results verify the usefulness of the proposed technique.

• 조명전기설비학회논문지
• /
• 제21권5호
• /
• pp.60-67
• /
• 2007

본 논문에서는 전력계통에서 발생되는 surge나 고장전류에 의해서 변압기의 고압측 권선에 선간단락이 발생할 경우 유도되는 전자력의 크기를 유한요소 전자계해석 프로그램을 이용하여 해석하는 방법을 제안하였다. 연구에서 사용된 배전용 변압기 model은 1[MVA], 22,900/220[V] 단상 외철형 Cable 권선형 변압기로서 권선간 단락을 모의하는 방법을 제안하고, FEM 프로그램(FLUX2D)을 이용하여 단락전류와 각방향의 전자력을 계산하고 분석하였다. 누설자속분포, 권선단락 시 전압 및 전류파형, 권선간에 작용하는 힘의 변화와 분포를 계산하였다. Simulation 방법의 타당성을 검증하기 위하여 이론치와 Pspice 프로그램을 이용하여 계산한 결과와 5[%] 이내의 오차율로 아주 잘 일치함을 확인하였다. 선간단락전류는 정격전류의 약 400배이며, 전자력도 $20{\sim}200$배 정도로 급증하였다. 본 연구의 결과는 배전용 변압기의 신뢰도 향상을 위하여 변압기 코일과 절연구조 설계에 유용한 정보를 제공하게 될 것이다.

• Journal of Power Electronics
• /
• 제17권6호
• /
• pp.1683-1693
• /
• 2017

This paper analyses the harmonic pollution to power grids caused by thyristor-controlled devices. It also formulates a mathematic derivation for the voltage spikes in thyristor-controlled branches to explain the harmonic and EMI derived from the reverse-recovery characteristics of the thyristor. With an equivalent nonlinear time-varying voltage source, a detailed simulation model is established, and the periodic dynamic switching characteristic of the thyristor can be explicitly implied. The simulation results are consistent with the probed results from on-site measurements. An improved trigger system with gate-shorted circuit structure is proposed to reduce the voltage spikes that cause EMI. The experimental results indicate that a prototype with the improved trigger system can effectively suppress the voltage spikes.

• Journal of Power Electronics
• /
• 제19권4호
• /
• pp.980-988
• /
• 2019

When compared with traditional power frequency generators, the frequency of a super high-speed permanent magnet generator (SHSPMG) is a lot higher. In order to study the influence of frequency on the electromagnetic field of SHSPMGs, a 60000rpm, 117kW SHSPMG was taken as a research object. The two-dimensional finite element model of the generator was established, and the two-dimensional transient field of the generator was simulated. In addition, a test platform of the generator was set up and tested. The reliability of the simulation was verified by comparing the experiment data with that of the simulation. Then the generator electromagnetic field under different frequencies was studied, and the influence mechanism of frequency on the generator electromagnetic field was revealed. The generator loss, voltage regulation rate, torque and torque ripple were analyzed under the rated active power load and different frequencies. The influences of frequency on the eddy current density, loss, voltage regulation rate and torque ripple of the generator were obtained. These conclusions can provide some reference for the design and optimization of SHSPMGs.

• Coupled systems mechanics
• /
• 제6권2호
• /
• pp.175-187
• /
• 2017

This paper deals with a uniform cantilever Euler-Bernoulli beam subjected to follower and transversal force at its free end as a model for a pipe conveying fluid under electromagnetic damper force. The electromagnetic damper is composed of a permanent-magnet DC motor, a ball screw and a nut. The main objective of the current work is to reduce the pipe vibration resulting from the fluid velocity and allow it to transform into electric energy. To pursue this goal, the stability and vibration of the beam model was studied using Ritz and Newmark methods. It was observed that increasing the fluid velocity results in a decrease in the motion of the free end of the pipe. The results of simulation showed that the designed semiactive electromagnetic damper controlled by on-off damping control strategy decreased the vibration amplitude of the pipe about 5.9% and regenerated energy nearly 1.9 (mJ/s). It was also revealed that the designed semi-active electromagnetic damper has better performance and more energy regeneration than the passive electromagnetic damper.

• 한국전자파학회논문지
• /
• 제24권4호
• /
• pp.436-447
• /
• 2013

본 논문에서는 IC(Integrated Circuit) 전자파 전도내성 시험 방법인 BCI(Bulk Current Injection)와 DPI(Direct Power Injection)를 이용하여 1.8 V I/O 버퍼에 대한 IC 전자파 전도내성을 시험하였다. IC 전자파 전도내성 시험을 회로 해석기를 사용하여 시뮬레이션 할 수 있는 등가회로 모델(model)을 개발하고 검증하였다. BCI와 DPI의 주파수에 따른 forward 전력을 비교한 결과는 주파수 성분에 따라 실제 IC에 도달하는 전자파(electromagnetic, EM) 노이즈의 양이 제한됨을 보여준다. 시뮬레이션을 통해, 가해지는 RF(Radio Frequency) 노이즈가 전달되는 경로의 삽입손실을 구하여, 하나의 시험 방법만으로는 넓은 주파수 영역에서 실질적인 IC 전자파 내성시험의 어려움을 발견하였다. 따라서 규정된 시험 방법을 보완하여 넓은 주파수 영역의 노이즈에 대해 신뢰도 높은 IC 전자파 전도내성 시험 방법을 제안한다.

• Journal of Astronomy and Space Sciences
• /
• 제32권1호
• /
• pp.45-50
• /
• 2015

We have developed a 2.5-dimensional electromagnetic particle simulation code using the particle-in-cell (PIC) method to investigate electromagnetic phenomena that occur in space plasmas. Our code is based on the leap-frog method and the centered difference method for integration and differentiation of the governing equations. We adopted the relativistic Buneman-Boris method to solve the Lorentz force equation and the Esirkepov method to calculate the current density while maintaining charge conservation. Using the developed code, we performed test simulations for electron two-stream instability and electron temperature anisotropy induced instability with the same initial parameters as used in previously reported studies. The test simulation results are almost identical with those of the previous papers.