DOI QR코드

DOI QR Code

Improvement of Shielding for Electromagnetic Compatibility

  • Chien, Tang Tan (Department of Electronic and Telecommunication Engineering, Danang University of Science and Technology) ;
  • Tu, Bui Thi Minh (Department of Electronic and Telecommunication Engineering, Danang University of Science and Technology) ;
  • Do, Tran Nguyen (Department of Electrical and Electronic Engineering, Nhatrang Vocational Training College)
  • Received : 2016.02.19
  • Accepted : 2016.02.25
  • Published : 2016.02.29

Abstract

This paper presents methods to improve the effectiveness of electromagnetic shielding. The slit appears in an enclosure's surface to ventilate. Slits may also appear due to power supply lines or to serve as a communication link between electronic circuits inside and outside the box. We simulated electromagnetic radiation in different conditions in order to propose a method to improve the effectiveness of electromagnetic shielding to ensure electromagnetic compatibility using CST software (Computer Simulation Technology).

Keywords

References

  1. Tang Tan Chien, "Tương thích dien tu", Nha xuat ban Giao duc Viet Nam, 2010.
  2. Clayton R. Paul, "Introduction to Electromagnetic Compatibility", John Wiley & Sons, Inc, 2006.
  3. Department of Defense Washington DC, "Military Handbook Grounding, Bonding and Shielding For Electronic Equipments and Facilities", 1987.
  4. Erik Olofsson, Jonny Jakobsson, "Control System for Electromagnetic Environmental Testing of Electronics with Reverberation Chamber", Sweden, 2010.
  5. Henry W. Ott, "Noise reduction techniques in electronic systems", John Wiley & Sons, Inc, 1988.
  6. Min Li, Joe Nuebel, Member IEEE, James L. Drewniak, Member IEEE, Richard E. DuBroff, Senior Member IEEE, Todd H. Hubing, Senior Member IEEE, and Thomas P. Van Doren, Senior Member IEEE, "EMI from Cavity Modes of Shielding Enclosures-FDTD Modeling and Measurements", IEEE Transactions on Electromagnetic Compatibility, Vol. 42, No. 1, 2000, pp. 29-38. https://doi.org/10.1109/15.831702
  7. R. W. Evans, "Design Guidelines for Shielding Effectiveness, Current Carrying Capability, and the Enhancement of Conductivityof Composite Materials", NASA Contractor Report 4784, 1997.
  8. V. Prasad Kodali, "Engineering Electromagnetic Compatibility", The Institute of Electrical and Electronics Engineers, Inc. 345 East 47th Street, New York, NY 10017-2394, 1996.
  9. Yeong-Chul Cheong, Kyung-Won Lee, PyoHong, Jong-Gwan Yook, "Design Equation of Shielding Effectiveness of Honeycomb", Defense Quality Assurance Agency, Dept. of Information & Communication Engineering, Kongju National Univ., Seoul, Korea, 2005.