• 전기전자학회논문지
• /
• 제22권2호
• /
• pp.506-509
• /
• 2018

최근 전장 시스템에서 부품의 개수와 주파수가 급증함에 따라 전자파에 의해 오동작이 발생하는 전자파 간섭(EMI: electromagnetic interference)이 자주 발생하고 있다. 본 논문에서는 EMI 필터, EMI 차폐 물질, 분산 스펙트럼 클록 등 다양한 전자파 적합성(EMC: electromagnetic compatibility) 대응 기술을 살펴보고 각 기술의 장단점에 대해 설명한다.

• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2006년도 하계학술대회
• /
• pp.170-174
• /
• 2006

In this paper electromagnetic topology (EMT) is used to analyze the lumped components on printed circuit boards (PCBs). It is difficult to obtain desirable results about the electromagnetic coupling problems by using a numerical or an experimental method on complex systems. The EMT can be considered as a helpful method to the analysis of electromagnetic interference / electromagnetic compatibility (EMI/EMC) problems in the complex system. To verify the validity of this method, three types of the PCBs mounting a simple circuit are fabricated and experimented.

• 전기학회논문지
• /
• 제57권5호
• /
• pp.821-826
• /
• 2008

Recently as a progress of electric technology, modern electric systems become more and more complicated. Thus, it is difficult to use a classical method to analyze responses of the systems in complicated electromagnetic environments because there are so many coupling phenomena. The electromagnetic topology (EMT) is a helpful solution to analyze electromagnetic interference / electromagnetic compatibility (EMI/EMC) of the large complex system. In this paper, EMT is applied to analyze an active element. And then to prove the validity of this analysis, a detector circuit including Schottky barrier diode is analyzed by EMT when input power is given directly.

• 한국항행학회논문지
• /
• 제27권6호
• /
• pp.798-803
• /
• 2023

스마트팩토리 (smart factory)를 비롯한 IIoT (industrial internet of things) 산업 분야에서는 최근 지능 정보화 기술의 발달로 전자기기들을 복합적으로 결합하여 설치하는 경우가 많다. 이와 같은 복합시설로부터 발생되는 전자파가 다른 기기 및 서비스에 영향을 주어 전자파 영향이 안전의 문제로 연결될 수 있으므로 복합시설 제어 시 발생하는 전자파간섭 (EMI; electromagnetic interference) 및 전자파적합성 (EMC; electromagnetic compatibility) 문제는 반드시 해결해야 할 필수 요소이며, 복합시설의 산업 육성을 위한 전자파 안전관리 기반이 마련되어야 한다. 이에 본 연구에서는 복합시설 등의 전자파 안전관리 대책 기반 조성을 위해 국가표준으로 개발된 전자파 안전관리 가이드라인에 의해 태양광 복합시설의 안전관리 실증을 수행하였다, 그 결과 태양광 전자파 안전관리를 통해 전자파 위험도를 관리 수준으로 낮추었으며, 국내 복합시설 전자파 안전관리 제도 마련을 위한 정책적 방안을 제시하였다.

• 전기전자학회논문지
• /
• 제22권2호
• /
• pp.510-513
• /
• 2018

최근 전자파 적합성(EMC: electromagnetic compatibility)의 중요성이 매우 높아짐에 따라 칩 수준에서의 전자파 간섭(EMI: electromagnetic interference) 측정이 자주 요구되고 있다. IEC 61967 및 IEC 62508에서 규정된 근거리 전자장 스캐닝(NFS: near-field scanning) 시스템은 칩 레벨에서의 전자파 간섭을 분석하는 대표적인 방법이다. 칩이 점점 고속화되면서 근거리 전자장 스캐닝 시스템의 측정 주파수는 광대역화되어야 하지만 근거리 전자장 탐침(NFP: near-field probe)의 신호 대 잡음 비(SNR: signal-to-noise ratio)가 저하된다는 문제가 있다. 본 논문에서는 근거리 전자장 스캐닝 시스템에서 광대역 특성을 가지면서도 잡음 대 성능 비를 향상시키는 기술에 대해 살펴본다.

• Journal of electromagnetic engineering and science
• /
• 제9권2호
• /
• pp.53-60
• /
• 2009

Remarkable developments in the electric and electronic industry have given people's daily life much more convenience and abundance. However, in electrical communication, or electric and electronic fields, making electrical and electronic devices more functional, more integrated, and faster have put electromagnetic interference(EMI) into more complex forms, and lots of problems such as interruption, malfunction, or interference by noise between electrical communication systems occurs every day. In this research, the electromagnetic compatibility(EMC) filter in the high powered breaker was designed and fabricated as a counter measure. The filter attenuated noise more than 20${\sim}$50 dB in the range of 10 MHz${\sim}$1.5 GHz. And, when the electric fast transient(EFT) of 4 kV in the level 4 of IEC 61000-4-4 was induced, it was soon suppressed to 600 V.

• Journal of Power Electronics
• /
• 제15권3호
• /
• pp.602-609
• /
• 2015

In this paper, a zero current transition (ZCT) double-ended flyback converter is proposed. All of the switching elements act under soft switching conditions and the voltage stress of the main switches is limited to the input voltage due to the innate behavior of the double-ended flyback converter. Providing soft switching conditions and clamping the voltage stress improves the efficiency and electromagnetic compatibility (EMC). The Proposed converter is analyzed in detail and its operating modes are discussed in detail. Experimental results are presented to verify the theoretical predictions. Moreover, the conducted electromagnetic emissions of the proposed ZCT double-ended flyback converter are measured to show another merit of the proposed converter in addition to providing soft switching conditions. The measured electromagnetic interference (EMI) of the proposed converter demonstrates that its EMI is lower than the conventional double-ended flyback converter. Furthermore, two simple and cost effective EMI reduction methods are applied to satisfy the EMC standard.

• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2006년도 하계학술대회
• /
• pp.162-165
• /
• 2006

This paper describes a measurement method for electromagnetic field strength of power-line communications(PLC) modem. First it outlines the technology used in PLC modems, and the technical regulation being offered to the technology, from the point of view of its effect on electromagnetic compatibility (EMC). The radio spectrum needs protection from other interferers, and there is a regime in place to provide this protection. Difficulties in achieving compatibility between the requirements for radio protection and the requirements for operation of the PLC modem mean that there is no consensus as yet as to how PLC modem components can be made compliant with EMC requirements globally. It is concluded that there is a measurement method according to CISPR standards which satisfy requirements in domestic regulation.

• 전기학회논문지P
• /
• 제65권1호
• /
• pp.13-17
• /
• 2016

EMC (Electro Magnetic Compatibility) of the electrical railway must be ensured for safety of passenger. Maglev trains has not friction between the wheels and the rails because levitation by an permanent magnets, electromagnets and superconducting magnets etc. So, it is advantageous to maintain a high speed without noise and vibrations. In this paper, we investigated that the magnetic field of the before and after installation electromagnetic waves absorber in order to analyze the effects of electromagnetic waves. The theoretical analysis of the electromagnetic wave absorber was simulated using finite element method. The magnetic field properties of electromagnetic waves absorber were measured by EMI (Electro Magnetic Interference) test receiver.

• Journal of electromagnetic engineering and science
• /
• 제4권2호
• /
• pp.51-55
• /
• 2004

With the progress of the electronics industry and radio communication technology, certain problems, such as electromagnetic interference(EMI), have arisen due to the increased use of electromagnetic(EM) waves. International organizations such as CISPR, FCC, and ANSI have provided the standards for the EM wave environment and for the countermeasure of the electromagnetic compatibility(EMC). EM wave absorbers are used for constructing an anechoic chamber to test and measure EMI and electromagnetic susceptibility(EMS). In this paper, we have designed an one-body EM(electromagnetic) wave ferrite absorber, based on the equivalent material constants method for both normally and obliquely incident waves, whose absorption abilities are superior to that of the conventional ones. The fabricated absorber has a thickness of 27.68 mm and shows an absorption ability over 20 ㏈ in the frequency from 30 MHz to 6 ㎓.