• 대한화학회지
• /
• 제35권6호
• /
• pp.713-719
• /
• 1991

푸리에 변환을 이용하여 100kHz의 주파수 범위까지 사용할 수 있는 전기화학적 임피던스 측정시스템을 제작하였다. 이 시스템은 신호 발생기, 특수하게 고안된 정전위기, 고속 자료수집 장치, 시스템 제어기 및 컴퓨터 인터페이스로 구성되었다. 우리가 제작한 시스템은 lock-in amplifier를 사용하는 상품과 성능이 비슷하였다. 측정에 소요되는 최소 시간은 사용된 최적 주파수의 한 주기에 해당하므로 상당히 짧아졌다. 이 시스템을 사용하면 부식 초기와 같이 시간에 따라 변하는 전기화학적 계면현상을 임피던스 측정법으로 연구할 수 있으리라 전망된다.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2011년도 춘계학술대회 및 Fine pattern PCB 표면 처리 기술 워크샵
• /
• pp.121-122
• /
• 2011

원자력 발전소 등 산업체 설비의 부식을 모니터링하고 부식 생성여부와 지속적인 사용 가능성을 판단하며, 그 상황에서의 적절한 조치을 취하게 할 수 있는 전기화학적 노이즈 측정은 정밀제어기술의 발전과 함께 그 응용 가능성이 커짐에 따라 관심이 증대되고 있기에 이를 본 연구에 적용 하고자 한다.

• 한국소음진동공학회논문집
• /
• 제16권7호
• /
• pp.762-768
• /
• 2006

To address the need for new intelligent sensing of systems, this study presents a novel strain sensor based on piezoresistivity of carbon nanotube (CNT) and its nanocomposites. Fabrication and characterization of the carbon nanocomposite material are discussed and an electrical model of the CNT strain sensor was derived based on electrochemical impedance spectroscopy analysis and strain testing. The dynamic response of the sensor on a vibrating beam was simulated using numerical analysis and it was compared with experimental test. The simulation showed good agreement with the strain response of the actual sensor.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 춘계학술대회논문집
• /
• pp.930-935
• /
• 2006

To address the need for new intelligent sensing of systems, this study presents a novel strain sensor based on peizoresistivity of carbon nanotube (CNT) and its nanocomposites. Fabrication and characterization of the carbon nanocomposite material are discussed and an electrical model of the CNT strain sensor was derived based on electrochemical impedance spectroscopy analysis and strain testing. The dynamic response of the sensor on a vibrating beam was simulated using numerical analysis and it was compared with experimental test. The simulation showed good agreement with the strain response of the actual sensor.

• Corrosion Science and Technology
• /
• 제21권5호
• /
• pp.360-371
• /
• 2022

Electropolishing has various parameters because an electrochemical reaction is applied. Accordingly, experiments to determine factors and levels of electropolishing conditions are in progress for various materials. The purpose of this investigation was to optimize conditions for electropolishing using the taguchi method for UNS S31603. Factors such as electrolyte composition ratio, electrolyte temperature, and electropolishing process time were selected. Electropolishing was optimized using analysis of variance (ANOVA), signal-to-noise ratio (the smaller the better characteristics), and surface analysis. Results of ANOVA revealed that only the electrolyte composition ratio among factors was effective for surface roughness. As a result of statistical analysis of the signal-to-noise ratio, the highest signal-to-noise ratio was calculated under electropolishing conditions with sulfuric acid and phosphoric acid ratio of 4:6, an electrolyte temperature of 75 ℃, and electropolishing process time of 7 minutes. In addition, the surface roughness after electropolishing under the above conditions was 0.121 ㎛, which was improved by more than 88% compared to mechanical polishing.

• 전력전자학회논문지
• /
• 제13권1호
• /
• pp.46-54
• /
• 2008

본 논문에서는 연료전지나 배터리 및 슈퍼커패시터 등의 전기화학적 전력기기의 임피던스 모델링에 적합한 저가의 임피던스 분광 시스템을 설계하고 구현하였다. 제안된 시스템은 간단한 센서회로 및 상용 DAQ(Data Acquisition) Board와 강력한 HMI(Human-Machine Interface)를 지원하는 그래픽 언어인 LabVIEW 소프트웨어를 이용하여 구성되었고 고가의 EIS(Electrochemical Impedance Spectroscopy) 장비를 대체하여 널리 사용될 수 있을 것으로 기대된다. 또한, 제안된 시스템에서는 Lock-in Amplifier를 이용함으로써 노이즈(Noise)가 많은 환경에서도 측정 주파수 성분의 정확한 측정이 가능하게 하였다. 제안된 시스템을 이용하여 Ballard Nexa 1.2kW PEM 연료전지 스택의 주파수별 임피던스를 측정하였고, 이를 바탕으로 한 등가 임피던스 모델도 제안된다. 제시된 모델과 개발된 장비의 유용함은 리플전류에 의한 연료전지 스택의 교류 손실 측정을 통해 증명된다.

• 한국소음진동공학회논문집
• /
• 제15권9호
• /
• pp.1077-1083
• /
• 2005

Electro-Active Paper (EAPap) is one of attractive electro-active polymer (EAP) materials for artificial muscles due to its many advantages such as light weight, biologically degradable, low cost, large displacement output, low actuation voltage and low power consumption. However, drawbacks of EAPap actuators include low force output and humidity dependence. To enhance the performance of EAPap, conductive polymer (PPy) and SWNT/conductive polymer (PANI) are coated on EAPap PPy as conductive polymer is coated on cellulose EAPap by means of electrochemical deposition. Two different dopants are used in PPy through conducting polymer processing. SWNTS are mixed with PANI in emeraldine base along with different dopants. The compound materials are coated on cellulose EAPap using spin coating system. The performance of PPy/EAPap and SWNT/PANI/EAPap are evaluated in terms of bending displacement, blocked force, and the effects of dopants, humidity, coaling time, voltage and frequency are investigated. Comparing with EAPap actuators, SWNT/PANI/EAPap actuators show $200\%$ improvement of bending displacement and $300\%$ increment of blocked force.

• 한국태양에너지학회 논문집
• /
• 제34권1호
• /
• pp.91-97
• /
• 2014

This paper proposes a modeling of fuel cell which replaces dc source during simulation. Fuel cells are electrochemical devices that convert chemical energy in fuels into electrical energy. This system has high efficiency and heat, no environmental chemical pollutions and noise. Proton exchange membrane fuel cells (PEMFC) are commonly used as a residential generator. These fuel cells have different electrical characteristics such as a low voltage and high current compared with solar cells. And there are different behaviors in the V-I curve in the temperature and pressure. Therefore, the modeling of fuel cell should consider wide voltage range and slow current response and the resulting electrical model is applied to boost converter with fuel cell as an input source.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 춘계학술대회 논문집 에너지변화시스템부문
• /
• pp.266-268
• /
• 2009

In this paper, authors deal with a power conditioning system (PCS) of high efficiency for a proton exchange membrane fuel cell (PEMFC) generation system. Fuel cells are a direct current (DC) power generators. They generate electricity through an electrochemical process that converts the energy stored in a fuel directly into electricity. Fuel cells have many benefits, which produce no particulate matter, nitrogen or sulfur oxides. And they have few moving parts and produce little or no noise. When fueled by hydrogen, they yield only heat and water as byproducts. Their wide application can reduce our dependence on fossil fuels and foreign sources of petroleum. This paper studies on a novel PCS circuit topology of high efficiency using in PEMFC generation system The controlling switches in the PCS is operated to soft switching. Some digital simulation results and experimental results for the proposed PCS is confirmed to the validity of the analytical results.

• 마이크로전자및패키징학회지
• /
• 제13권1호통권38호
• /
• pp.57-61
• /
• 2006

연료전지는 연료(수소)의 화학적 반응에 의해 축적된 화학에너지를 전기에너지로 변환하여 직류 전기를 발생시키는 에너지원이다. 연료전지는 질소나 유황산화물 등의 유해한 물질을 방출하지 않으며 기계적 동력부가 없고 거의 무소음으로 운전되는 이점을 가진다. 수소연료에 의한 연료전지는 그들의 부산물로써 열과 물을 방출한다. 연료전지를 이용한 응용분야의 확대로 인해 화석연료나 수입 석유의 의존도를 현저히 감소시킬 수 있다. 본 논문에서는 이러한 연료전지 (PEMFC, Proton Exchange Membrane Fuel Cell)의 출력을 치대한 활용하고 발전시스템의 안전운전을 위한 전력변환기(PCS, Power Conditioning System)에 대해 연구하였다. 본 논문에서는 고효율로 운전하는 새로운 전력변환 회로토폴로지를 설계하고, 발전시스템에 적용하여 각종 실험을 통하여 그 타당성을 입증하였다. 그 결과 연료전지 발전시스템은 고성능으로 동작되는 전력변환기에 의해 발전시스템의 효율과 성능을 향상시키게 된다.