• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2009년도 춘계학술대회 논문집
• /
• pp.1951-1958
• /
• 2009

This paper presents a synchronous-rotating-frame-based control of single-phase UPQC(Unified Power Quality Conditioner) to improve power quality in ac electrified railway systems. The simulation results show that the UPQC can compensate the harmonic supply voltages, the harmonic load currents, and the reactive power in electrified railway systems. Validity of the proposed UPQC control method based on the synchronous rotating frame is illustrated through the simulation results.

• 전기학회논문지
• /
• 제64권2호
• /
• pp.331-337
• /
• 2015

The power flow analysis of electrified railway is required complicated calculation, because of variable load. Train runs trough rail supplied by electric power therefore, the load value in electrified railway system fluctuates along time. The power flow algorithm in electrified railway system is different from general power system, and the power flow simulation is peformed by the particular simulation software. Powerail is simulation software for analysis of traction power supply system developed by KRRI, in 2008. This consists of load forecasting module, including TPS and time scheduling, and power flow module. This software was verified by measured current under normal feeding condition, however, has not been verified by voltage on the condition of extended feeding. This paper presents the verification of PowerRail based on voltage drop under extended feeding condition. This is performed by comparing simulation result with field test. Field test and simulation is done in commercial railway line.

• 조명전기설비학회논문지
• /
• 제24권8호
• /
• pp.48-54
• /
• 2010

교류 전기철도 시스템은 비선형 단상 부하인 차량의 부하특성으로 인해 고조파 왜곡, 무효전력 발생, 3상 불평형과 같은 전기품질 문제를 가지고 있다. 이 같은 전기품질 문제는 철도 시스템뿐만 아니라 철도와 연계된 다른 건전한 계통에도 악영향을 미치게 된다. 따라서 본 논문에서는 이와 같은 전기철도 급전시스템의 전기품질 문제를 보상하기 위해 철도용 전기품질 보상장치(RPQC; railway power quality conditioner)를 적용하고, SRF(synchronous-reference-frame) 제어를 이용한 RPQC의 제어방법을 제안한다. 제안하는 제어방법을 통해 RPQC는 고조파 왜곡, 무효전력, 부하 불평형과 같은 전기품질 문제를 순시적으로 보상할 수 있으며, 시뮬레이션을 통해 이를 검증한다. 시뮬레이션 결과는 제안한 RPQC 제어방법의 타당성을 보여주고 있다.

• 한국철도학회논문집
• /
• 제12권5호
• /
• pp.694-699
• /
• 2009

교류 전기철도 급전시스템의 전압, 전류의 왜곡 및 전압 sag과 무효전력을 보상하기 위한 단상 UPQC의 동기좌표계를 이용한 제어 방법을 제안한다. 단상 UPQC의 동기좌표계를 이용한 제어를 통해 단상인버터 형태인 UPQC의 직렬보상기와 병렬보상기를 순시적으로 제어한다. 시뮬레이션을 통해 단상 UPQC를 이용하여 비선형 단상 부하인 차량으로 인해 급전시스템에 생길 수 있는 전압, 전류의 왜곡 및 전압 sag과 무효전력의 보상이 가능함을 증명하고, 단상 UPQC의 동기좌표계를 이용한 제어 방법이 타당함을 확인한다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.2203-2206
• /
• 2005

A load flow and short circuit fault simulation of AC electrified railway distribution systems is presented with DIgSILENT PowerFactory software. Load flow of electrified railways distribution system with concerning multi train lines and dynamic characteristics of train load is studied for different time laps. The dynamic characteristics of train load in starting and braking conditions with different starting and stopping times and its moving positions makes the load flow complicated so there is a great need in studying the effects of electrified railways on load flow. Short circuit fault transients is also studied and simulated for both power system or traction distribution system and their effects on the operation of the train sets is investigated.

• 한국철도학회논문집
• /
• 제5권4호
• /
• pp.253-259
• /
• 2002

This paper presents the first simulation model using EMTDC program to analyze the electrified train voltage distribution characteristics in ac auto-transformer fed railroads. In general, all of the electrified train supply system has the characteristics that the train supply line is a naturally non-symmetrical and unbalanced system. Also, it is needed to model the Scott transformer which invert the balanced 3-phase quantity into 2-phase. Therefore, the general simulation methodology using previous simplified equivalent circuit or RMS based program can't obtain the accurate results to reflect the real-time operation because these methodology is basically assumed on completely 3-phase balanced system. To overcome these defects, in this paper, the EMTDC simulation model to analysis the completely electrified railroad system with Scott transformer and AC auto-transformer is presented. Also, the correctness of EMTDC modeling is confirmed by the old basic concepts and we think that this EMTDC model has the future powerful capability for application of railroad system analysis.

• 한국전자파학회논문지
• /
• 제20권9호
• /
• pp.983-988
• /
• 2009

본 논문에서는 고속전철 운행에 따라 인접 통신 선로에서 발생하는 유도전압을 국내 고시에 제시된 측정 회로에 따라 측정하고 유도전압의 특징을 분석하였다. 고속전철 선로와 2 km 병행하는 2개 루트의 시험용 통신선로를 구성하여 이격 거리, 병행 거리에 따른 유도전압을 측정 및 분석하고, 측정 회선 단말 접지 위치의 레일과의 거리에 따라 측정값에 대한 영향 여부를 검토하였다. 또한 1일간 시간에 따른 변화, 요일별 변화 등을 분석하였으며, 유도전압에 포함되어 있는 고조파 성분을 확인하였다. 이론과 같이 이격 거리에 따른 유도전압의 차이를 보였으며, 단말의 접지 위치는 측정값에 큰 영향을 주지 않음을 확인하였다. 또한 특정 시간대 및 특정 날짜에 상대적으로 큰 유도전압이 나타남을 확인하였다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 춘계학술대회 논문집
• /
• pp.1286-1291
• /
• 2004

This paper was showed evaluation method and technical items for measurement test of new catenary system of Honam(Daejeon - Mokpo) conventional railway electrified. This line have tested by three type new electric rolling stocks in order to test construction quality and operation safety of a new catenary system with speed-up than conventional speed. We have some important experiences through measurement test of catenary system by new device installed on train roof.

• 한국철도학회논문집
• /
• 제7권1호
• /
• pp.65-69
• /
• 2004

In reference to this study, Part Ⅰ showed how the system respond to the harmonics originated from electric locomotives. That is, the system response to the harmonics was derived by computational algorithm with numerical formulas in theoretical aspects. However, Real catenary system has complex configuration of conductors and it is an important point that if we can consider the circuit element of catenary conductors as an uniformly distributed RLC element. Moreover, harmonic characteristics in electric locomotive depend on its operational modes. From these point of view, measurements of harmonics are performed for real railway power supply systems under the various operational modes, and spectrum and distortion analyses in measurement data are described.

• 한국철도학회논문집
• /
• 제7권1호
• /
• pp.60-64
• /
• 2004

Harmonic current originating from electric locomotives can be magnified due to the impedance characteristics of power supply circuit and bring about various problems. That is, electromagnetic interference with communication lines, operational trouble in signaling, overheat and/or vibration in power capacitor, mis-operation in protection relay and so on. Therefore, the exact assessment of the harmonic current flow must be undertaken at design and planning stage for the electric traction systems. for these reasons, this study propose a new approach to model and to analyse traction power feeding system focused on system response to current and voltage harmonic(PART I). Measurements of harmonics are also performed for railway power supply systems under normal operation. Spectrum and distortion analyses in measurement data are variously described in PART II.