• Korean Chemical Engineering Research
• /
• 제54권3호
• /
• pp.410-418
• /
• 2016

본 연구에서는 Multi-Walled Carbon Nanotube (MWCNT)와 니켈 분말을 포함하는 전기 전도성 복합체를 제조하여 물성을 비교하였다. 복합체 제조에 앞서, MWCNT 표면을 개질하여 카르복실기(-COOH)와 아미노기($-NH_2$)를 도입하였으며, 표면 개질 혹은 개질되지 않은 MWCNT와 니켈 분말을 diglycidyl ether of bisphenol A (DGEBA)에 분산하여 전기 전도성 복합체를 제조하였다. 그리고 triethylenetetramine (TETA)를 경화제로 사용하여 전도성 복합체와 혼합한 후, doctor blade법으로 코팅하여 전기전도성 변화를 측정하였다. MWCNT의 표면 개질 여부와 에폭시 수지와의 반응여부는 fourier transform infrared (FTIR) spectrometer, thermogravimetric analyzer (TGA) 및 elemental analyzer (EA)로 확인하였으며, 복합체의 표면 형상은 scanning electron microscope (SEM), 복합체의 면 저항 값은 4-point probe로 측정하였다. 그 결과 아미노기로 표면 개질한 MWCNT 0.5 wt%와 40%의 니켈 분말을 사용하여 제조한 복합체의 면 저항 값은 $(9.87{\pm}1.09){\times}10^4{\Omega}/sq$로 니켈 분말만 53.3% 사용하여 제조한 복합체의 면 저항 값과 유사한 값을 나타내었다. 따라서, 0.5%의 아미노기로 개질된 MWCNT를 포함하는 전도성 복합체는 순수 니켈 분말만 사용하는 복합체보다 13.3%의 니켈 분말 함량을 감소할 수 있음을 알았다.

• 한국정밀공학회지
• /
• 제30권6호
• /
• pp.658-664
• /
• 2013

Bending actuators composed of cellulose with an electrically conducting polymer (CP) are fabricated and their performance is characterized in the air. Two different counter ions, perchlorate and tetrafluoroborate are used as dopant ions in the polyaniline CP processing. CP-cellulose-CP trilayer and CP-cellulose bilayer samples are fabricated with different dopant ions, and their actuation performance is evaluated in terms of tip displacement, blocked force and electrical power consumption along with the humidity level and actuation frequency. The trilayer samples substantially enhanced the tip displacement compared to the bilayer ones. The actuation performance of the trilayer actuator is three times better than that of original cellulose electro-active paper (EAPap) actuator. The displacement and blocked force of CP-EAPap actuators are dependent on the humidity and frequency.

• 마이크로전자및패키징학회지
• /
• 제27권1호
• /
• pp.9-15
• /
• 2020

The 'field-effect' underlies the operation of most conventional electronic devices. However, effective control and implementation of the field-effect in semiconductor devices are limited due to screening of the electric-field by conducting electrodes. Thus far, the electronic devices have necessarily been designed to avoid or minimize the electric-field screening effect. As an alternative approach to this, a new type of conducting electrodes which would be transparent to both visible light and electric-field while being electrically conductive have been developed. Here, we define these electrodes as 'electric-field transparent electrodes' and provide a review on related work. Particular attention is paid to the material selection and design strategies to enhance the electric-field transparency of the electrodes while maintaining good electrical conductivity and optical transparency. We then introduce potential applications of the electric-field transparent electrodes in electronic and optoelectronic devices.

• 한국염색가공학회지
• /
• 제20권6호
• /
• pp.82-86
• /
• 2008

Cooling function is definitely one of the most desirable attribute of clothing. In spite of the recent progress on phase changing material(PCM) research, the final products with sufficient amount of cooling capability have not yet to be developed in market. A new concept of cooling fabrics has been proposed by applying "Peltier effect" to textile materials. It occurs whenever electrical current flows through two dissimilar conductors; depending on the direction of current flow, the junction of the two conductors is absorbed or released heat. This effect has been tested on P-type and N-type conducting polymers. A P-type conductive polypyrrole coated fabric was synthesized by in-situ polymerization on plain weave PET to make conductive fabrics. And an N-type electrically conductive material was synthesized by treatment of MWNT and polyethyleneimine(PEI). A noticeable amount of temperature difference has been found on the fabrics.

• 전기화학회지
• /
• 제10권3호
• /
• pp.229-232
• /
• 2007

An amperometric immunosensor for the determination of rabbit IgG is proposed. The immunoassay utilizes a screen-printed carbon electrode on which osmium redox polymer is electrodeposited. This immunoassay detects 0.1 ng/ml of rabbit IgG, which is ${\sim}10^2$ fold higher than the most sensitive enzyme amplified amperometric immunoassay. The assay utilizes a screen-printed carbon electrode which was pre-coated by a co-electrodeposited film of an electron conducting redox hydrogel and a rabbit IgG. The rabbit IgG in the electron conducting film conjugates captures, when present, the anti-rabbit IgG. The captured anti-rabbit-IgG is labeled with horseradish peroxidase (HRP) which catalyzes the two-electron reduction of $H_2O_2$ to water. Because the redox hydrogel electrically connects HRP reaction centers to the electrode, completion of the sandwich converts the film from non-electrocatalytic to electro-catalytic for the reduction of $H_2O_2$ to $H_2O$ when the electrode is poised at 200 mV vs. Ag/AgCl.

• 한국분말재료학회지
• /
• 제25권5호
• /
• pp.435-440
• /
• 2018

In the present study, we develop a conductive copper/carbon nanomaterial additive and investigate the effects of the morphologies of the carbon nanomaterials on the conductivities of composites containing the additive. The conductive additive is prepared by mechanically milling copper powder with carbon nanomaterials, namely, multi-walled carbon nanotubes (MWCNTs) and/or few-layer graphene (FLG). During the milling process, the carbon nanomaterials are partially embedded in the surfaces of the copper powder, such that electrically conductive pathways are formed when the powder is used in an epoxy-based composite. The conductivities of the composites increase with the volume of the carbon nanomaterial. For a constant volume of carbon nanomaterial, the FLG is observed to provide more conducting pathways than the MWCNTs, although the optimum conductivity is obtained when a mixture of FLG and MWCNTs is used.

• 전기화학회지
• /
• 제7권1호
• /
• pp.44-48
• /
• 2004

The two-component type enzyme amplified amperometric DNA assay is described to use an ambient $O_2$ of the substrate of the DNA labeling enzyme. Although the assay detects DNA only at > 0.5M concentration, a concentration $\~10^6$ fold higher than the sandwich-type enzyme amplified amperometric DNA assay, it can be run with an always available substrate. The assay utilizes screen-printed carbon electrodes (SPEs) which were pre-coated by a co-electrodeposited film of an electron conducting redox hydrogel and a 37-base long single-stranded DNA sequence. The DNA in the electron conducting film hybridizes and captures, when present, the 37-base long detection-DNA, which is labeled with bilirubin oxidase (BOD), an enzyme catalyzing the four-electron reduction of $O_2$ to water. Because the redox hydrogel electrically connects the BOD reaction centers to the electrode, completion of the sandwich converts the film from non-electrocatalytic to electrocatalytic for the reduction of $O_2$ to water when the electrode is poised at 200 mV vs. Ag/hgCl. The advantage or the assay over the earlier reported sandwich type enzyme amplified amperometric DNA assay, in which the amplifying enzyme was horseradish peroxidase, is that it utilizes ambient $O_2$ instead of the less stable and naturally unavailable $H_2O_2$.

• 한국전기전자재료학회논문지
• /
• 제15권1호
• /
• pp.61-66
• /
• 2002

A method for designing antireflection (AR) and antistatic (AS) coating layer by the use of conducting polymer as an electrically conductive transparent layer is proposed. The conducting AR coating is composed of four-layer with alternating high and low refractive index layer: silicon dioxide (n=1.44) and titanium dioxide (n=2.02) prepared at low temperature by sol-gel method are used as the low and high refractive index layer, respectively. The poly(3,4-ethylenedioxythiophene) which has the surface resistivity of 10$^4$Ω/$\square$ is used as a conductive layer. Optical constant of each ARAS coating layers such as refractive index and optical thickness were measured by 7he spectroscopic ellipsometer and from the measured optical constants the spectral properties such as reflectance and transmittance were simulated in the risible region. The reflectance of ARAS films on glass substrate was below 1 %R and the transmittance was higher than 95 % in the visible wavelength (400-700 nm). The measured AR spectral properties was very similar to its simulated results.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 2003년도 봄 학술발표회 논문집
• /
• pp.40-43
• /
• 2003

최근 관심의 대상이 되고 있는 유기박막트랜지스터 (Organic Thin Film Transisto., OTFT)는 현재 사용되고 있는 무기물 트랜지스터에 비해 가볍고 낮은 공정 온도와 가격으로 인하여 대면적 LCD, EL, smart card의 능동구동소자로서 적용이 가능하다고 알려져 있다[1,2]. 하지만 현재 연구되고 있는 단분자 유기물을 사용한 OTFT는 비교적 높은 온도에서 소자의 각 구성요소를 증착해야 되므로 여전히 복잡한 공정이 필요하며, 활성층으로 쓰이는 유기물과 금속전극의 계면문제로 전기적 특성이 떨어진다[3]. (중략)

• 한국고분자학회지:고분자과학과기술
• /
• 제26권4호
• /
• pp.305-312
• /
• 2015