• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 하계학술대회 논문집 A
• /
• pp.460-462
• /
• 1995

ATS Systems is activated against the over-running and the crashes between trains. Up to now, ATS Systems have been constituted analog systems adopting the changed frequency method or amplitude modulation, which is impossible to give any essential informations. In this paper, it is dealt with. digital ATS Systems which are replaced the former ATS Systems in the advanced nation of railways. Especially, this paper shows the possibility of any developments for the digital ATS Systems by the experiment of digital ATS systems by Frequency Shift Keying method.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 하계학술대회 논문집 B
• /
• pp.810-812
• /
• 1995

Effects of positions of transducers and of distances between transducers on attenuation properties of active noise control systems is investigated via computer simulations. Computer simulations show that the acoustic monopole and dipole systems for duct noise attenuation are sensitive to variations of the transducer location.

• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2004년도 하계학술대회
• /
• pp.226-229
• /
• 2004

본 논문은 초고주파 영역에서 개방 단말 동축선을 대신해서 복소 유전율을 측정할 수 있는 MEMS 프로브와 그 응용예로 MEMS 프로브 어레이를 제안한다. MEMS 프로브는 기존의 동축선 프로브와 달리 커넥터와의 연결이 간단하여 일회용으로 프로브를 사용할 수 있다는 점에서 의료용으로 사용할 수 있는 가능성이 있다. 샘플의 유전율 분포를 구하기 위해서 기존의 센서는 반복 접촉을 요구하고 이로 인한 번거로움과 측정 오차를 줄일 목적으로 MEMS 프로브 어레이를 개발 하였다. MEMS 프로브 어레이는 RF 스위치를 사용하여 다수의 측정 포인트를 한번의 센서 접촉으로 측정할 수 있는 새로운 개념의 프로브이다. 1GHz부터 40GHz까지의 광대역에서 0.9% 식염수의 유전율을 측정하여 MEMS 프로브의 성능을 검증하였다.

• 전기학회논문지
• /
• 제63권2호
• /
• pp.266-271
• /
• 2014

The Electromagnetic Interference(EMI) generating from corona discharge of transformer area can interference the digital Instrument and Control(I&C) systems located nearby transformers. When the potential gradient of the electric field around the conductor is high enough to form a conductive region but not high enough to cause electrical breakdown to nearby objects, the EMI of corona discharge emits with the conducted and radiated noise and it interferences the signals of the I&C systems. Since digital I&C systems have an efficiency and competitive price, the analog I&C systems have been upgraded and displaced with the digital I&C systems but which have less EMI Immunity. There was no assessment to I&C systems by EMI generating corona discharge nearby transformers. When the safety-related I&C systems are installed in plants, the verification of equipment EMI should be done not in site-specific test but in test facilities. There are the need to do the site-specific EMI evaluation of corona discharge nearby transformers. This paper assesses the margin between plant emission limits and the highest composite plant emission of corona. When the non safety-related I&C systems are placed in transformer area, it suggests the appropriate radiated susceptibility level to EMI of corona discharge.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1989년도 한국자동제어학술회의논문집; Seoul, Korea; 27-28 Oct. 1989
• /
• pp.901-906
• /
• 1989

A robust stability problem for time delay systems is discussed by using a property of Lyapunov type operator equation. We propose a method to check the robust stability against the parameter perturbations occurring in both lumped parameter part and distributed delay element.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -1
• /
• pp.110-112
• /
• 2002

In this paper, a new technique for Thai isolated speech phoneme segmentation is proposed. Based on Thai speech feature, the isolated speech is first divided into low and high frequency components by using the technique of wavelet decomposition. Then the energy contour of each decomposed signal is computed and employed to locate phoneme boundary. To verity the proposed scheme, some experiments have been performed using 1,000 syllables data recorded from 10 speakers. The accuracy rates are 96.0, 89.9, 92.7 and 98.9% for initial consonant, vowel, final consonant and silence, respectively.

• Journal of Electrical Engineering and Technology
• /
• 제13권4호
• /
• pp.1705-1714
• /
• 2018

This paper develops a novel controller called iterative learning sliding mode (ILSM) to control linear and nonlinear fractional-order systems. This control applies a combination structures of continuous and discontinuous controller, conducts the system output to the desired output and achieve better control performance. This controller is designed in the way to be robust against the external disturbance. It also estimates unknown parameters of fractional-order systems. The proposed controller unlike the conventional iterative learning control for fractional systems does not need to apply direct control input to output of the system. It is shown that the controller perform well in partial and complete observable conditions. Simulation results demonstrate very good performance of the iterative learning sliding mode controller for achieving the desired control objective by increasing the number of iterations in the control loop.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 Proceedings ICPE 01 2001 International Conference on Power Electronics
• /
• pp.64-68
• /
• 2001

This paper presents an innovative prototype of a new conceptual electromagnetic induction heated type far infrared rays radiant heating appliance using the voltage-fed edge-resonant ZVS-PWM high frequency inverter using IGBTs for food cooking and processing which operates under a constant frequency variable power regulation scheme. This power electronic appliance with soft switching high frequency inverter using IGBTs has attracted special interest from some advantageous viewpoints of safety, cleanliness, compactness and rapid temperature response, which is more suitable for consumer power electronics applications.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1999년도 제14차 학술회의논문집
• /
• pp.121-124
• /
• 1999

Subspace-based state space system identification (4SID) methods have been demonstrated to per-form well in a number of applications, but the properties of these have not been fully analyzed or understood yet. For applying the methods, no assumptions on structure of realization are needed and any coordinate transformation is allowed for the estimates. This is one reason why many kinds of properties expected for identification procedures have not been clarified yet. We illustrate, by using Schur complement, an interpretation of the R matrix yielded by the QR factorization in the 4SID procedure. The results in this paper can be useful for analysis of properties of parameters obtained by 4SID methods.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1999년도 제14차 학술회의논문집
• /
• pp.125-128
• /
• 1999

A linear time-invariant model can be described either by a parametric model or by a nonparametric model. Nonparametric models, for which a priori information is not necessary, are basically the response of the dynamic system such as impulse response model and frequency models. Parametric models, such as transfer function models, can be easily described by a small number of parameters. In this paper aiming to take benefit from both types of models, we will use linear-combination of basis fuctions in an impulse response using a few parameters. We will expand and generalize the Kautz functions as basis functions for dynamical system representations and we will consider estimation problem of transfer functions using Kautz function. And so we will present the influences of poles settings of Kautz function on the identification accuracy.