• Proceedings of the KIEE Conference
• /
• 2009.04a
• /
• pp.216-218
• /
• 2009

In this paper, a real time monitoring and management system being operated in the ubiquitous environment was developed to monitor leakage current, load current, and arc-fault, and an electrical safety network for reasonable management of electrical risk factor was proposed. For confirmation of usefulness and reliability of the proposed safety network and system, the developed intelligent panels were applied to 28 Korean traditional houses in Jeonjoo city, and the network including the panels was operated. If the National Electrical Safety Network is completely constructed in the houses of general electrical users, the network will have an effect on that a main manager transfers from general people to expert. As a result, the electrical fires caused by an over-load, an arc-fault, and an earth-fault will be prevented.

• Journal of the Korean Society of Safety
• /
• v.24 no.3
• /
• pp.13-18
• /
• 2009

This paper is purposed to develop DAQ H/W, S/W and DB which can be used in developing electrical fire alarm system or in analyzing electrical fire cause, by detecting and monitoring precursor signals which have high possibility leading to electrical fire on electrical distribution wires. In this paper, developed was DAQ H/W adopting the C8051FXXX CPU which can analyze the measurement signals of current and voltage in electrical distribution wires, other CPU was investigated in view of the best digital sampling rate on the basis of previous researches for electrical fire alarm system. Also, the S/W which can interface with DAQ H/W's communication protocol and can be applied for electrical fire causes analysis, are embodied by LabVIEW. The combined DAQ H/W and S/W could analyze efficiently normal as well as abnormal electrical signals such as RMS value, instantaneous value of current and voltage, frequency signals etc, on the electrical wires. Also, DB system was constructed for recording various analysis results for precursor signals including voltage and current signals. The results by simulator and experiment showed that the suggested scheme with DAQ H/W, S/W and DB in this paper has high usability.

• Proceedings of the KIEE Conference
• /
• 2007.10a
• /
• pp.215-216
• /
• 2007

This paper presents a real-time scheduler for nuclear safety system. According to constraints and requirements of nuclear safety system, scheduler design analysis is done and algorithms are developed for implementation. Using DSP based hardware, a real-time scheduler is realized. Consequently, this paper shows the performance of periodical software through the monitoring program.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07a
• /
• pp.92-95
• /
• 2003

본 논문에서는 철도차량 견인전동기에 대한 상태진단 및 상시감시 기술에 관하여 소개하였다. 권선의 절연상태 진단을 위한 비파괴 시험법에서는 부분방전량 Q에 대한 평균열화도 $\Delta$로 표현되는 D-Map에 의해 잔여 절연내력(residual dielectric strength)을 예측하고, 기기의 운전이력측면에서 기동-정지 횟수와 열적, 전기적 및 열싸이클 스트레스 등에 의해 각 열화 인자를 고려한 운전시간에 기반한 N-Y 수명예측을 수행한다. 그리고 견인전동기의 전류에 대한 온라인 상태감시를 통해 베어링 고장, 고정자 및 전기자 고장, 고장 또는 전동기축 손상에 기인하는 비정상 운전상태 의 감지를 수행한다.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.27 no.8
• /
• pp.90-97
• /
• 2013

In recent years, the many electric saving methods are studied because of difficulty of meeting the demand. The electric energy management such as monitoring of branch power consumption, demand control, metering, power quality monitoring, electric safety monitoring can make energy saving. The purpose of this paper is to develop a system which can provide the integrated management of various functions required for energy management by consumers. In this system all functions which were embodied into each devices are integrated into intelligent meter. The developed systems are tested and implemented by installing at consumer electric distribution panel.

• Transactions on Electrical and Electronic Materials
• /
• v.7 no.5
• /
• pp.247-251
• /
• 2006

The traction DC feeder cable is one of the key devices for the safety operation of subway system, but for low voltage DC feeder cable (<3000 V) for subway, little attention has been paid by investigators on its online monitoring technology. With an introduction of cable laying and operation environment for the cable, this paper investigated the on-line monitoring technology of 1500 V DC feeder cable of subway. Firstly, in the text, the fault model of 1500 V DC cable was proposed based on the analysis of the fault type of the DC feeder cable, and then put forward synthetically on-line monitoring discharge signal and DC leakage current signal to assess DC feeder cable insulating state. The results of laboratory experiment prove that the proposed methods are feasible and can be implemented on-line monitor on DC feeder cable of subway.

• Nuclear Engineering and Technology
• /
• v.55 no.1
• /
• pp.1-11
• /
• 2023

To protect people and the environment from environmental radiation, the Act on Protective Action Guidelines against Radiation in the Natural Environment was formulated in Korea in 2011. This law regulates matters related to radiation safety that can be encountered in life. In accordance with this law, radiation monitoring equipment is operated at major airports and ports across the country, ensuring radiation monitoring of imported cargo. Currently, six ministries conduct radiation monitoring of imported cargo: the Nuclear Safety and Security Commission; the Korea Customs Service; the Ministry of Food and Drug Safety; the Ministry of Environment; the Ministry of Agriculture, Food and Rural Affairs; and the Korea Forest Service. Each ministry designates the relevant cargo items for radiation monitoring. The objective of this study was to comprehensively review the Korean radiation monitoring system for imported cargo and identify the areas and scopes of improvement. This paper also proposes a new law and an integrated supervision plan, which involves establishing a dedicated department to enhance the efficiency and professionalism of the national radiation monitoring system for imported cargo. The review will contribute to the development of a more sophisticated national radiation monitoring system for imported cargo.

• 한국태양에너지학회:학술대회논문집
• /
• 2012.03a
• /
• pp.433-438
• /
• 2012

LED is expected as an environmentally friendly next generation light source with its good reliability and long lifetime. In this paper, we propose the PV-Battery Driven LED Security Lighting using the LabVIEW program. The remote monitoring is a program for monitoring the voltage and current that made from PV-Battery Driven LED security lighting in remote area. The main subject of this paper is about making the more useful monitoring program to get and save the data from LED Security Lighting. We develop a prototype of the proposed system.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.11
• /
• pp.1931-1936
• /
• 2016

In this paper, we analyzed causes of accidents that recently increased in the illegal and defective LED lamps. They were analyzed by the electrical characteristics calculation and reappearance experiments. The causes of the accidents were analyzed from the circuit affected by the variation of voltage, current and power by harmonics. We drew a conclusion for electrical safety in illegal or degraded LED lamps from the analysis result. The management factors for electrical safety in LED lamps were harmonics, reactive power and power factor. It is possible to secure the electrical safety through monitoring of power factor in failure products and available in smart meters or smart distribution boards.

• Proceedings of the KIPE Conference
• /
• 2008.06a
• /
• pp.583-585
• /
• 2008

전기설비에서 전기안전을 확보하기 위해 전기설비의 전압, 전류, 절연저항, 누설전류 등을 직접 측정하고 관리하려면 시간과 비용이 많이 소요된다. 최근 전력 IT기술들의 발전과 활용이 증가하고 있는데 이러한 기술들을 전기설비 전기안전 관리에 적용할 경우 운영 및 유지보수의 효율성과 전기안전을 확보할 수 있다. 따라서 전기설비의 효율적인 관리와 전기안전을 확보하기 위한 전력 IT 기반 전기안전감시시스템을 설계하여 활용하고자 한다.