• Journal of Electrochemical Science and Technology
• /
• 제15권4호
• /
• pp.459-465
• /
• 2024

To achieve recycling without safety hazards by explosion of spent batteries, an efficient full discharging procedure is required to stabilize the batteries before recycling. However, typical salt solution discharging technique has environmental pollution, inefficiency, and safety issues due to wastewater emission, slow discharging rate, and severe voltage rebound. Electrical discharging techniques can be applied to overcome these problems, but the typical constant-current and constantcurrent constant-voltage modes have a trade-off relationship between discharge time and voltage rebound. In this study, we propose reverse voltage mode as an expeditious and safe electrical discharging protocol that effectively addresses the tradeoff between discharging time and voltage rebound. The proposed reverse voltage mode for full discharging method was proven to be effective regardless of the electrode crystal structure or the battery form factor. This result is expected to present new methodology for pre-stabilization of spent batteries for more eco-friendly and stable recycling.

• KIEE International Transactions on Electrophysics and Applications
• /
• 제4C권2호
• /
• pp.55-59
• /
• 2004

Throughout manufacturing processes, pulse shaping is required for material processing and it is regarded as an important (actor according to the specific characteristics of materials. Therefore, this study suggests a highly appropriate pulse shaping technique using a multi-switching method. This is a pulse superposition method in which one flash lamp can consecutively turn on by the double switching of the discharging system. It is possible to construct a variety of pulse shapes and pulse widths by the consecutive trigger of the silicon-controlled rectifiers (SCR) of a PIC (program integrated circuit) one-chip microprocessor. The use of this technique can provide a number of advantages to people who require suitable pulse shaping for particular applications such as welding, cutting, and drilling.

• Proceedings of the KIPE Conference
• /
• 전력전자학회 2003년도 춘계전력전자학술대회 논문집(2)
• /
• pp.630-634
• /
• 2003

This paper proposes a Carrier-Rotation PWM technique that is new solution for the voltage unbalancing problem of flying capacitors in the Flying Capacitor Multi-level Inverter (FCMI).The proposed PWM technique equalizes the utilization of phase leg voltage redundancies corresponding to the charging and the discharging state of flying capacitors during one switching period of all the switches. it also has the same switch utilization and the reduced harmonics of output voltage. Hence, it is more suitable for the FCMI compared with the conventional solutions. Experimental results on the laboratory prototype flying capacitor 3-level inverter confirm the validity of the proposed PWM technique.

• Journal of Power Electronics
• /
• 제15권6호
• /
• pp.1438-1445
• /
• 2015

A new DC-DC power converter is researched for renewable energy and battery hybrid power supplies systems in this paper. At the charging mode, a renewable energy source provides energy to charge a battery via the proposed converter. The operating principle of the proposed converter is the same as the conventional DC-DC buck converter. At the discharging mode, the battery releases its energy to the DC bus via the proposed converter. The proposed converter is a non-isolated high step-up DC-DC converter. The coupled-inductor technique is used to achieve a high step-up voltage gain by adjusting the turns ratio. Moreover, the leakage-inductor energies of the primary and secondary windings can be recycled. Thus, the conversion efficiency can be improved. Therefore, only one power converter is utilized at the charging or discharging modes. Finally, a prototype circuit is implemented to verify the performance of the proposed converter.

• Proceedings of the KIEE Conference
• /
• 대한전기학회 2000년도 하계학술대회 논문집 C
• /
• pp.1563-1565
• /
• 2000

This paper presents the preliminary results on the application of optical fiber sensor(OFS) for the diagnosis of degradation in the transformer oil. An OFS system using a Mach-Zehnder interferometry technique was built to detect attenuation of acoustic signal produced by discharging. With increasing the number of discharging in the insulation oil, the attenuation of acoustic signal became greater. A strong correlation between electrical and acoustic signal intensities from discharge generated in the transformer oil was confirmed by the results reported here.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• 제55권1호
• /
• pp.13-20
• /
• 2006

In this paper, a control method of ozone generator for a tiny deodorizer is proposed, and also a cooling technique is described which is cooling down the flowing air gap into a silent discharger to $2[^{\circ}C]$ to generate ozone of high density and diffusing power. As the digital control system for this method, a double feedback loop is designed which detects the voltage and current of equivalent capacitor of the discharger and compensates for the poor power waveform caused by the noise at high discharging frequency. During the plant modeling of this system, computing time factor is considered as a unique parameter of the power system to improve the respond characteristics with regard to fluctuating load and to replenish the computing time delay of the controller. Through the experiment, sinusoidal input current for discharger can be acquired and all the effectiveness of this accurate control system over unstable ozone discharger are proved.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• 제11권5호
• /
• pp.93-102
• /
• 1997

In order tl get Maaterial requirements for the Improviment of erliability of Insulatint materials for power cables, partial discharge characteristics of Polyethylenes were measured by an ultrasonic techjique and Measured signals were processed to cbtain the paraceters useful for thr quantification of partial discharge characteristics of polyethylenes. This technique was applied to obtain material requirements for the development of improved insulating materials for power cables,As a result, it was found that partial discharging activities in polyethylenes were suppressed considerably when p proper amount of acrylic acid, 0.003[wt %]in this particular case, is grafted on polyethylene chains.It can be concludid from the present study that partial discharging actibities in polyethylenes could be suppressed by the modification of polyethylene with proper chemical components, acrilic acid in this particular study.

• Progress in Superconductivity and Cryogenics
• /
• 제22권3호
• /
• pp.13-19
• /
• 2020

This study presents the experiment and simulation results on the magnetic field response and electrical stability behaviors of no-insulation (NI) and metal insulation with stainless steel tape (MI-SS) which wound in form of racetrack type coils. First of all, the structural design of the racetrack type bobbin was shown along with its parameters. Then, the current-voltage tests were carried out to measure the critical current of both test coils. Also, the sudden discharging and charging tests were performed in the steady state to estimate the decay field time and magnetic field response, respectively. Finally, the overcurrent tests were conducted in the transient state to investigate the electrical stability of these test coils. Based on the experimental results, the contact surface resistances were calculated and applied to the field coils (FCs) of 10-MW-class second generation high temperature superconducting generator (2G HTSG) used in wind offshore environment. The charging delay time and electrical stability for NI and MI-SS HTS FCs of 10-MW-class 2G HTSG are analyzed by the equivalent circuit model and the key parameters which were obtained from the electromagnetic finite element analysis results.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 한국전기전자재료학회 2007년도 추계학술대회 논문집
• /
• pp.275-275
• /
• 2007

Two sorts of electrode composed of Sulpur/CNT/PVDF and Silver/CNT/PVDF were prepared by in situ chemical method and their electrochemical performance were evaluated by using cyclic voltammetry, impedance measurement and constant-current charge/discharge cycling technique. Also, composite electrodes were characterized by FE-SEM and BET. Raw materials such as CNT/Silver and CNT/Sulfur were mixed in ethanol, dried. These mixed materials were heated at 900 and $320^{\circ}C$ for 2hr, respectively in order to enhance contact among CNT electrodes. Electric double layer capacitor cells were fabricated using these mixed powder with polymer of PVDF. For the charging and discharging characteristics measured at scan rate of 1 mA/s, Supercapacitor of Sulphur-CNT-PVDF electrode showed a better performance than that of Ag-CNT-PVDF, which seems to be related with lower contact resistance of Sulphur-CNT-PVDF electrode.

• Journal of IKEEE
• /
• 제13권1호
• /
• pp.49-56
• /
• 2009

In this paper, a simulation for the stability of the catenary voltage through charging and discharging by introducing an energy storage system in the railway system and the efficient usage of restoration energy has been performed. In order for the simulation, a simple railway model with an appropriate control technique has been introduced. The catenary voltage area is divided into two areas with voltage control and an area with normal operation and current control is performed to satisfy current limit of the supercapacitor. We confirmed the energy absorption and emission through the simulation and observed energy efficiency through charging and discharging according to the operation state of the railway.