• 한국전기전자재료학회논문지
• /
• 제34권2호
• /
• pp.99-104
• /
• 2021

Ion-beam sputtering (IBS) was used to deposit semiconducting IZTO (indium zinc tin oxide) thin films onto heavily-doped Si substrates using a sintered ceramic target with the nominal composition In0.4Zn0.5Sn0.1O1.5, which could work as a channel layer for oxide TFT (oxide thin film transistor) devices. The crystallization behavior and electrical properties were examined for the films in terms of deposition parameters, i.e. target tilt angle and substrate temperature during deposition. The thickness uniformity of the films were examined using a stylus profilometer. The observed difference in electrical properties was not related to the degree of crystallization but to the deposition temperature which affected charge carrier concentration (n), electrical resistivity (ρ), sheet resistance (Rs), and Hall mobility (μH) values of the films.

• Transactions on Electrical and Electronic Materials
• /
• 제7권6호
• /
• pp.301-304
• /
• 2006

We studied the nematic liquid crystal (NLC) aligning capabilities using the new alignment material of the SiC (Silicon Carbide) thin film. The SiC thin film exhibits good chemical and thermal stability. The good thermal and chemical stability make SiC an attractive candidate for electronic applications. A vertical alignment of nematic liquid crystal by atomic beam exposure on the SiC thin film surface was achieved. The about $87^{\circ}$ of stable pretilt angle was achieved at the range from $30^{\circ}\;to\;45^{\circ}$ of incident angle. Consequently, the vertical alignment effect of liquid crystal electro-optical characteristic by the atomic beam alignment method on the SiC thin film layer can be achieved.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 추계학술대회 논문집
• /
• pp.398-398
• /
• 2007

The Liquid Crystal (LC) alignment uniformity is very important in LC devices. The alignment mechanism of LC molecules on a rubbed polyimide (PI) surface is very important for both LC fundamental research and application. So, Generally a rubbing method to align LC has been widely used to mass-produce LCD panels. But because rubbing method is contact method between rubbing fabric and indium-tin-oxide glass or flexible substrate, rubbing method has some defects, such as the electrode charges and the creation of contaminating particles. Thus we strongly recommend a non-contact alignment technique for getting rid of some defects of rubbing method. Most recently, the LC aligning capabilities achieved by ion-beam exposure on the organic and nonorganic thin film surface have been reported successfully. In this research, we studied the tilt angle generation and electro-optical performances for a NLC on homeotropic polyimide surfaces with ion-beam exposure. The LC aligning capabilities of a nematic liquid crystal (NLC) on a homeotropic PI surface using a new ion-beam method were studied. On the homeotropic PI surface, the tilt angle of the NLC by exposure ion-beam had a tendency to decrease as increased ion-beam energy density. And, on the homeotropic PI surface, the alignment character of the NLC with respect to ion-beam energy was good. And we achieved satisfactory result for EO character.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
• /
• pp.1155-1158
• /
• 2004

Various inorganic alignment layers of nematic liquid crystal (NLC) molecules were investigated. Ar ion beam (IB) irradiation was utilized for alignment method and homogenous and homeotropic orientations with tilt angle were obtained on the suitable inorganic thin films. Proper doping materials were added to diamond-like carbon (DLC) films. In the case of homogeneous alignment, nitrogen doping affected the increase of pretilt angle, while the fluorine bonding in the DLC films was induced the tilted homeotropic alignment cause its extreme hydrophobic property. These results showed that ion beam irradiation method could be applied to the various alignment mode of NLC such as IPS, TN and MVA.

• Transactions on Electrical and Electronic Materials
• /
• 제8권6호
• /
• pp.265-267
• /
• 2007

The liquid crystal(LC) aligning capabilities of a nematic liquid crystal(NLC) on a homeotropic polyimide(PI) surface using a new ion-beam method were studied. Exposure ion-beam of $45^{\circ}$ incidence angle shows a good LC alignment of the NLC on the homeotropic PI surface. Also, on the homeotropic PI surface, the tilt angle of the NLC by exposure ion-beam of $45^{\circ}$ incidence angle had a tendency to decrease as increased ion-beam energy density. And, on the homeotropic PI surface, the alignment character of the NLC with respect to ion-beam energy was good at 1500 eV. And we achieved satisfactory result for EO character.

• 한국광학회지
• /
• 제32권1호
• /
• pp.1-8
• /
• 2021

단일 레이저의 출력 한계를 뛰어넘기 위한 빔결합 방법으로서, 보강간섭 원리를 이용한 타일형 결맞음 빔결합 시스템에 대해 연구하였다. 와트급 출력의 3 채널 결맞음 광섬유 레이저 및 삼각형 배치의 팁-틸트(tip-tilt) 기능을 갖춘 3 채널 출력단을 자체제작 하였다. 모니터링 시스템, 위상제어기, 3 채널 위상변조기 간의 궤환 제어 시스템(closed-loop system)을 구성하고 SPGD 알고리즘을 적용하여, 위상잠금 속도 5~67 kHz, 이상적인 계산값 대비 중심부 광세기 효율 53.3%의 성공적인 3 채널 위상잠금을 구현하였다. 빔결합 소자가 필요 없고, 가장 고출력 가능성을 가진 타일형 결맞음 빔결합을 위한 요소기술 개발이 완료되어, 향후 다채널, 고출력, 고속 제어 연구로 이어질 수 있을 것으로 기대된다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.339-341
• /
• 2006

This paper proposes a method of container position measurement using automatic landing system that is estimated by a laser range finder. In the most of container position measurement methods, CCD cameras or laser scanners have been used to get the source data. However those sensors are not only weak for disturbances, for examples, the light, fog, and rain, but also the system cost is high. When the spreader arrives the goal position, it is still swung by inertia or by wind effect. In this paper, the spreader swung data have been used to find the container position. The laser range finder is equipped in the front side of spreader. It can measure distance and relative position between spreader and container. This laser range finder can be rotated as desired by a motor. And a tilt sensor is equipped on the spreader to measure spreader sway. We estimate the relative position information between the spreader and a container using the laser range finder and tilt sensor through the geometrical analysis.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 D
• /
• pp.2299-2301
• /
• 2001

광 디스크의 용량을 증가시기키 위해선, 레이저 다이오드의 단파장화와 렌즈의 개구수 증가가 수년 동안 시도되어왔다. 불행히도 이러한 노력들은 디스크 틸트(tilt)로 인해 야기되는 코마(coma) 수차로 인한 부작용을 유발하였다. 이런 문제를 해결하기 위해, 램(random access memory, RAM) 디스크의 경우 몇 가지 검출과 보상 방법이 제안되었다. 그러나, 롬(read only memory, ROM) 디스크의 경우 아직까지 뚜렷한 해결책이 제시되지 않고 있다. 본 논문에서는 8분할 광 검출기에 의해 생성되는 차동 위상 검출(differential phase detection, DPD) 신호를 이용한 고밀도 롬 디스크에서 래디얼(radial) 틸트를 검출하는 방법을 제안한다. 3축 렌즈 구동형 액츄에이터(actuator)를 이용하여 개발한 래디얼 틸트 서보로 검출된 래디얼 틸트를 보상한다. 액츄에이터의 회전이 트래킹(tracking) 서보(servo)에 미치는 영향을 소개한다. 끝으로 제안된 방법의 유용성을 고밀도 롬 드라이브에 대한 실험을 통해 검증한다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.1775-1780
• /
• 2005

One of the most important factors so that mobile objects can achieve their purpose is the information about their positions. In this paper, we propose an improved beacon system, to which ultrasonic sensors are attached, for the indoor localization of mobile objects. We have researched so that it can cover the wider space and estimate more accurate positions than the existent beacon systems. The existent beacon systems have the constraint that one beacon cannot cover wide area since ultrasonic sensors have limits in the angle of signal (beam-angle) on which their signal strength depends. Hence, we used the active beacon which consists of a pan-tilt mechanism and a beacon module. The active beacon system can always aim at mobile objects in order to transmit the strongest signal of the ultrasonic sensors into the objects using the pan-tilt mechanism. In addition, this system is inexpensive because it can decrease the number of beacons by about a half of the beacons of the existent system. Finally, the results show what is the difference between the active beacon system and existent beacon systems, and how accurate it is.

• 한국전자파학회논문지
• /
• 제23권10호
• /
• pp.1128-1136
• /
• 2012

본 연구에서는 기존의 기계적 조향 방식에 의한 이동 통신 서비스 음영 지역 문제점을 개선하기 위해서 배열 안테나 빔 패턴의 null-steering 기법에 기반한 전기적 빔 조향 장치를 연구하였다. 특히, 하향 $-10^{\circ}{\sim}0^{\circ}$ 이내에서 빔 조향이 가변될 수 있도록 기지국 안테나 수직 빔 패턴의 $-30^{\circ}{\sim}0^{\circ}$ 범위에 존재하는 null을 제거하여 하향 방향에서 전파 음영을 개선하였다. 이때 안테나의 요구 사양은 하향 조향각 조절 범위 내에서 14.5 dBi의 이득과 부엽 세기는 -18 dB 이하로 억제되어야 한다. 또한, 편파의 격리도는 30 dB 이상을 나타내어야 한다. 본 연구의 타당성을 보이기 위해 W-CDMA용 기지국 안테나 및 빔 조향 장치를 설계 제작하여 그 유용성을 보였다.