• ETRI Journal
• /
• v.27 no.2
• /
• pp.239-242
• /
• 2005

This paper introduces two different current differencing buffered amplifier (CDBA)-based synthetic floating inductance circuits. Both configurations use a grounded capacitor. They are fully integrable and provide the advantages of electronic tuning.

• Proceedings of the IEEK Conference
• /
• 2001.06e
• /
• pp.181-184
• /
• 2001

This paper has been studied driving circuits in electrical valves. Also in this paper, opto-couplers of driving circuit are replaced with digital one chip of Altera company. Designs in order to realization of one chip are carried out with Altera Max Plus II. For compact size and light weight, the realization with one chip is necessary in the electrical valves. This paper has designed and presented the digital schemetic circuits, finally the driving circuits are sucessfully operated with the designed chip and showed the saving of area in the driving circuits of electric valves.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.33 no.2
• /
• pp.47-55
• /
• 1984

This paper is concerned with a computer-aided state assignment, that is, coding race-free internal states of asynchronous sequential circuits, and a method for minimizing the combinational network of asynchronous sequential circuits. The FORTRAN version of the peoposed algorithm results in race-free state assignments and reduction of the number of connections and gates with near minimal hardware cost. Some examples are designed by the proposed computer program to illustrate the algorithm in this paper. Finally, results are compared with those of the other methods.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.51 no.6
• /
• pp.307-312
• /
• 2002

Inter-turn short circuits can have significant effects on a generator and its performance. The Inter-turn short circuits sensor for synchronous generator's field winding has been developed. The sensor, installed in the generator air-gap, senses the slot leakage flux of field winding and produces a voltage waveform proportional to the rate of change of the flux. For identification of reliability for sensor, a shorted- turn test was performed at the Seoinchon combined cycle power plant on gas turbine generator and stim turbine generator. This sensor will be used as a detecting of Inter-turn short circuits for synchronous generator's field winding.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.7
• /
• pp.1261-1267
• /
• 2007

Although LEDs have been used in various applications with improving the brightness and luminous efficacy, the electrical and optical characteristics of high power LED varies at different temperature and starting time. In this paper, optimal heat sink and apparatus design were conducted using IR camera and ICEPAK on the LED bulb consisting with fourteen LED array. The temperatures of heat sink and LED device of the designed LED bulb without cooling pan were $74^{\circ}C\;and\;96.8^{\circ}C$, respectively, showing in good themal characteristics. For high efficiency driving circuit of LED array adopted optimal heat sink design, driving circuits of constant voltage and current circuits were suggested and fabricated. As a result the efficacy of all driving circuits showed more than 20 lm/W. Also, the constant current circuits are suitable for signal lamp, hallway lamp, and flash lamp having short operating time(about 30 min). On the other hand, a reading light and indoor lamp having long operating time can be controlled by constant voltage circuit.

• Journal of Information Display
• /
• v.5 no.4
• /
• pp.1-6
• /
• 2004

In this paper, we investigate on the characteristics of poly-Si TFTs reuired for the implementation of analog circuits to be integrated with System-on-Glass (SoG). Matching requirements in terms of resistor values, threshold voltage and mobility of poly-Si TFTs are derived as a function of the resolution of display system. Effective mobility of poly-Si TFTs required for the realization of source driver is analyzed for various panel sizes.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.26 no.4
• /
• pp.294-297
• /
• 2021

A grid voltage estimation method for modular plug-in active power decoupling (APD) circuits is proposed in this study as direct replacements of electrolytic capacitors. Since modular plug-in APD circuits cannot have additional grid voltage sensors and should be operated independently without information exchange with the front-end converter, it is impossible to obtain the phase information of the grid directly. Therefore, the proposed method uses the second-order harmonic component of the DC-link voltage to estimate the grid voltage necessary to control the APD circuit. By employing the proposed method, the concept of modular plug-in APD circuits can be realized and implemented without direct detection of the grid voltage. The experimental results based on hardware-in-the-loop simulation (HILS) validate the effectiveness of the proposed control method.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.62 no.2
• /
• pp.84-89
• /
• 2013

In this paper, we propose interface circuits for reducing power consumption and EMI when sequences of data from LCD controller to LCD driver IC by transmitting two bit data during one clock period. The proposed circuits are operated in current mode, which is different from conventional voltage-mode signaling techniques, and also employ threshold technique of Modified-LVDS(Low Voltage Differential Signaling) method. We have simulated the proposed circuits using H-SPICE tool for performance analysis of the proposed method. The simulation results show that the proposed circuits provide a faster transmission speed and stronger noise immunity than the conventional LVDS circuits. It might be suitable for the real-time transmission of huge image data in LCD system.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.38 no.10
• /
• pp.832-839
• /
• 1989

New chopper circuits for decoupled operation of the dc series motor are presented. These new choppers are capable of controlling field current completely separately, while offering capability of bidirectional armature energy flow. To develop the chopper circuit with minimum number of swithcing elements, the complete family of possible conduction circuits are systematically investigated. Then one or two quadrant chopper circuits which offer the desired operations are synthesized from the resulting conduction circuits. Finally, the developed chopper circuits are analyzed in the steady state. The details of operation of the chopper circuits are also fully described and experimented.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.43 no.3
• /
• pp.504-514
• /
• 1994

Combinational automatic test pattern generators (CATPG) have already been commercialized because their algorithms are well known and practical, while sequential automatic test pattern generators(SATPG) have been regarded as impractical because they are computationally complex. A technique to use CATPG instead of SATPG for test generation of sequential circuits is proposed. Redesign of seauential circuits such as Level Sensitive Scan Design (LSSD) is inevitable to use CATPG. Various partial scan techniques has been proposed to avoid full scan such as LSSD. It ha sbeen reported that SATPG is required to use partial scan techniques. We propose a technique to use CATPG for a new partial scan technique, and propose a new CATPG algorithm for the partially scanned circuits. The partial scan technique can be another choice of design for testability because it is computationally advantageous.