• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.6
• /
• pp.138-144
• /
• 2003

A crack in a ferroelectric ceramic subjected to an electric field is analyzed. The boundary of the electrical saturation zone is estimated based on the finite-width saturation zone model, which is analogous to a finite-width Dugdale zone model for mode III. It is shown that the shape and size of the switching zone depends strongly on the boundary of the electrical saturation zone and the ratio of the coercive electric field to the yield electric field. The crack tip stress intensity factor under small scale conditions is evaluated by employing the model of electric nonlinear domain switching. It is found that fracture toughness of the ferroelectric material may be increased or decreased depending on the material property of electrical nonlinearity.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2006.05a
• /
• pp.274-277
• /
• 2006

This paper describes a lighting warning system (LWS) which consists of a corona needle electrode, a low noise differential amplifier, an A/D converter, an one-chip microprocessor, a LCD and alarm devices. The corona needle electrode is used to measure electric field intensity caused by thunderclouds on the ground level. To evaluate the sensitivity of the LWS, calibration experiment was carried out using a round-shape parallel plate electrode system. The theoretical and experimental results show that the LWS can measure electric field intensity over 2 [kV/m].

• Proceedings of the KIEE Conference
• /
• 1995.07c
• /
• pp.1168-1170
• /
• 1995

The purpose of this thesis is to fabricate the hexamethyldisiloxane thin film by plasma polymerization method, and to investigate the electric conduction characteristics of plasma polymerized thin film. Current density was measured in being changed annealing temperature(room temperature${\sim}125[^{\circ}C]$) and electric field intensity($10^5{\sim}1.2{\times}10^6$[V/cm]). The current density of thin films fabricated at discharge power of $30{\sim}90$[W] showed $1.3{\times}10^{-11}{\sim}3.1{\times}10^{-12}[A/cm^2]$ after 10 minutes of permission of electric field. The current density increased gradually with increasing of annealing temperature and electric field intensity. The electric conduction type of thin films fabricated in discharge power of 90[W] agreed with Schottky type.

• Proceedings of the KIEE Conference
• /
• 2001.11a
• /
• pp.219-223
• /
• 2001

In this paper, electromagnetic waves were measured in accordance with propagating the discharge when positive and negative DC high voltage was applied to needle-plane electrdes and plane-plane electrdes that solid dielectric was inserted between the electrodes. The radiated electromagnetic waves were investigated in bandwidth of VHF($30{\sim}230$[MHz]) using an biconical antenna. In needle-plane electrodes high electric field intensity is shown in both frequency band of 90(MHz) and 170[MHz], and gradually decreasing characteric is appeared at high frequency band. However high electric field intensity is shown in both 80[MHz] and 140[MHz] in case of plane-plane electrodes configuration. And over 150[MHz] frequency band, rapidly decreasing characteristic is shown. Moreover, electric field intensity of positive DC is about $5{\sim}10$[dB] higher than negative DC.

• Journal of the Optical Society of Korea
• /
• v.18 no.6
• /
• pp.739-745
• /
• 2014

We have demonstrated a $Ti:LiNbO_3$ electro-optic electric-field sensor utilizing a $1{\times}2$ Y-fed balanced-bridge Mach-Zehnder interferometric (YBB-MZI) modulator, which uses a 3-dB directional coupler at the output and has two complementary output waveguides. A dc switching voltage of ~25 V and an extinction ratio of ~12.5 dB are observed at a wavelength of $1.3{\mu}m$. For a 20 dBm rf input power, the minimum detectable electric fields are ~8.21, 7.24, and ~13.3 V/m, corresponding to dynamic ranges of ~10, ~12, and ~7 dB at frequencies of 10, 30, and 50 MHz respectively. The sensors exhibit almost linear response for an applied electric-field intensity from 0.29 V/m to 29.8 V/m.

• 연구논문집
• /
• s.30
• /
• pp.93-99
• /
• 2000

Electro-Rheological(ER) fluids change their apparent viscosity according to the electric field strength. The electrical and rheological properties of zeolite based the ER fluids were reported. The electric field dependent yield stress are obtained from experimental investigation on the Bingham property of the ER fluid. Using ER fluids, it is possible to directly interface between electric drop and flow rate of the ER fluid was hydraulic control valve measured under application of an electric field. The purpose of the present study is pressure drop measurement of an ER valve by using strain gage. The performance characteristics of the valve system are evalusted in terms of pressrue fixed with respect to the intensity of employed electric fields and flow rates. As a result, it is esperimentally confirmed that pressure control valve using ER fluids applicable to use in hydraulic power systems.

• Proceedings of the IEEK Conference
• /
• 2000.07b
• /
• pp.823-826
• /
• 2000

Motion detection is an important step in computer vision and image processing. Traditional motion detection systems are classified into two categories, namely, feature based and gradient based. In feature based motion detection, features in consecutive frames are detected and matched. Gradient based methods assume that the intensity varies linearly and locally. The method, which we propose, is neither feature nor gradient based but uses the electric field theory. The pixels in an image are modeled as point charges and motion is detected by using the variations between the two electric fields produced by the charges corresponding to the two images.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.43 no.6
• /
• pp.1001-1009
• /
• 1994

The present paper deals with a new developed sensor for measuring the time-varying magnetic fields and describes the experimental results of trasient magnetic field that takes place during the operations of electric appliance. The operation principle of the self-integrating magnetic field sensor by using coaxial cable is analyzed and a calibration investigation is carried out. The frequency bandwidth of the magnetic field measurement system is from 40 Hz to about 300 kHz. The magnetic field induced by the starting and/or operation of electric appliance mainly includes the odd harmonics such as the third, the fifth and the seventh harmonics. The magnetic field intensity caused during the operation of ultrasonic washer is inversely proportional to distance, this correspodns to induction component. As a result, it was known that the odd harmonics of magnetic field in the desing of electromagnetic shield employed for protecting electronic circuit and control devices have to be considered.

• Journal of the Korean Society of Safety
• /
• v.19 no.2
• /
• pp.34-40
• /
• 2004

This paper presents an analysis of SAR(Specific Absorption Rate) distribution characteristics in a head model using FDTD(Finite Difference Time Domain). In this study human head was modelled in four elements-layered structure, consisting of skin, fat, skull and brain. To calculate the electromagnetic fields wihtin the head model, FDTD method was used. In the FDTD method, the electromagnetic wave is analyzed by solving a Maxwell's equations repeatedly. For the calculation, distance between power source and head model increased by 10[m]. Power density and incident electric field intensity were calculated. Based on the incident electric field, the program which calaculated internal electric fields intensity and SAR calculation of the head model were developed. The results of developed program using FDTD were compared with those of a commericial programs, which showed the availability and usefulness of the suggested scheme in this paper.

• Journal of the Optical Society of Korea
• /
• v.19 no.4
• /
• pp.346-350
• /
• 2015

We report a measurement of the effective refractive index of a nematic liquid crystal (NLC) inside a Fabry-Perot (FP) etalon according to the applied electric fields. The effective refractive index of the NLC depends on the intensity of the applied electric field. A wavelength-swept laser with a polygon-scanner-based wavelength filter is used as a wide-band optical source to measure the effective refractive index of the NLC. The bandwidth of the optical source is greater than 90 nm around 1300 nm. The fabricated NLC FP etalon consists of glass substrates, gold layers as the electrodes with highly reflective surfaces, polyimide layers as the planar alignment layers, and an LC layer. Furthermore, we measured the Freedericksz transition voltages for three types of NLC FP etalons having thicknesses of $30.6{\mu}m$, $55.4{\mu}m$, and $108.8{\mu}m$. The Freedericksz transition voltages in the three cases are nearly equal. The measured effective refractive indices in the three cases decreased from 1.67 to 1.51 as the applied electric field intensity was increased. Beyond the threshold electric field, the effective refractive indices quickly decreased and eventually saturated at a value of 1.51 for all cases.