• 제목/요약/키워드: Electric device

검색결과 1,824건 처리시간 0.037초

접속·접촉불량 사고에 의한 전기화재 방지용 보호장치에 관한 연구 (A Study on Protection Device for Electrical Fire Prevention on Joint/Contact Badness Faults)

  • 최정규;곽동걸;이승철;이봉섭;박영직
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 2014년도 전력전자학술대회 논문집
    • /
    • pp.5-6
    • /
    • 2014
  • According to 2013 fire statistical yearbook in the National Emergency Management Agency, the main cause of an electrical fire are classified to short circuit fault, overload fault, electric leakage, partial disconnection, and joint/contact badness. The occurrence factor of fire is electric arc or spark accompanied with electrical faults. Residual Current Protective Devices(RCDs) of high sensitivity type used at single phase (220V) cut off earth leakage and overload but the RCDs can not cut off electric arc or spark to be a main cause of electrical fire. To be improved on such problem, this thesis is proposed to a auxiliary control device for RCD cut off electric arc or spark.

  • PDF

진화된 3D실장 디바이스 - 경박 단소화를 실현하기 위한 혁신 - (Advanced 3-D mounting device - Innovations to realize ultra-small device -)

  • Makinaga, Hitoshi
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2008년도 하계종합학술대회
    • /
    • pp.397-398
    • /
    • 2008
  • 종래의 MID 기술을 마쯔시타 전공의 독자적인 기술을 심화 확충하여, 차기 시장이 요구하는 "소형 고성능 고 신뢰성의 3차원 실장 Device"를 개발하였으므로 아래와 같이 보고 한다. MIPTEC이란, "Microscopic Integrated Processing Technology"로 마쯔시타 전공의 기술 브랜드를 말한다.

  • PDF

표면 전하에 의한 Thyristor 소자의 차단전압 및 누설전류특성 연구 (Study on the Blocking Voltage and Leakage Current Characteristic Degradation of the Thyristor due to the Surface Charge in Passivation Material)

  • 김형우;서길수;방욱;김기현;김남균
    • 대한전기학회논문지:전기물성ㆍ응용부문C
    • /
    • 제55권1호
    • /
    • pp.34-39
    • /
    • 2006
  • In high-voltage devices such as thyristor, beveling is mostly used junction termination method to reduce the surface electric field far below the bulk electric field and to expand the depletion region thus that breakdown occurs in the bulk of the device rather than at the surface. However, coating material used to protect the surface of the device contain so many charges which affect the electrical characteristics of the device. And device reliability is also affected by this charge. Therefore, it is needed to analyze the effect of surface charge on electrical characteristics of the device. In this paper, we analyzed the breakdown voltage and leakage current characteristics of the thyristor as a function of the amount of surface charge density. Two dimensional process simulator ATHENA and two-dimensional device simulator ATLAS is used to analyze the surface charge effects.

Investigating the effect of changing parameters in the IEC device in comparative study

  • H. Ghammas;M.N. Nasrabadi
    • Nuclear Engineering and Technology
    • /
    • 제56권1호
    • /
    • pp.292-300
    • /
    • 2024
  • Kinetic simulations have been performed on an Inertial Electrostatic Confinement Fusion (IECF) device. These simulations were performed using the particle-in-cell (PIC) method to analyze the behavior of ions in an IEC device and the effects of some parameters on the Confinement Time (CT). CT is an essential factor that significantly contributes to the IEC's performance as a nuclear fusion device. Using the PIC method, the geometry of a two-grided device with variable grid radius, the number of cathode grid rings, variable pressure and different dielectric thickness for the feed stalk was simulated. In this research, with the development of previous works, the interaction of particles was simulated and compared with previous results. The simulation results are in good agreement with the previous results. In these simulations, it was found that with the increase of the dielectric thickness of the feed stalk, the electric field was weakened and as a result, the confinement time was reduced. On the other hand, with the increase of the cathode radius, the confinement time increased. Using the results, an IEC device can be designed with higher efficiency and more optimal CT for ions.

채혈바늘에 의한 2차 감염 방지기능을 갖는 랜싯과 전동식 채혈기의 개발 (Development of the Electric Lancing Device and the Lancet to Prevent the Secondary Contamination by Needlestick Injury)

  • 홍성철;장석진;강신한
    • 한국산학기술학회논문지
    • /
    • 제12권12호
    • /
    • pp.5464-5468
    • /
    • 2011
  • 본 연구는 채혈바늘에 의해 발생하는 2차 감염을 방지하기 위한 안전 랜싯(Lancet)을 설계 개발하고, 연속하여 채혈하는 경우에 쉽게 그리고 편리하게 사용할 수 있도록 무선 전동방식 채혈기의 설계 제작을 목적으로 한다. 안전랜싯은 채혈침과 보호캡이 일체형으로 설계되어 채혈 순간을 제외하고는 채혈침이 항상 보호캡 속에 있도록 하여 채혈바늘에 의한 사고를 방지하도록 하였다. 전동 채혈기는 충전건전지를 전원으로 하고 솔레노이드의 작동으로 랜싯을 타격하여 채혈하도록 설계되었으며, 연발타격 또는 단발타격의 기능을 선택하도록 설계 제작되었다. 또한 타격봉에 의한 충격력과 사용된 배터리의 수명 등이 측정되었다. 이 채혈기는 한방병의원의 사혈기로도 사용되도록 제작되었다.

Effects of 60-Hz Time-Varying Electric Fields on DNA Damage and Cell Viability Support Negligible Genotoxicity of the Electric Fields

  • Yoon, Yeo Jun;Li, Gen;Kim, Gyoo Cheon;Lee, Hae June;Song, Kiwon
    • Journal of electromagnetic engineering and science
    • /
    • 제15권3호
    • /
    • pp.134-141
    • /
    • 2015
  • The effect of a 60 Hz time-varying electric field was studied using a facing-electrode device (FED) and a coplanar-electrode device (CED) for further investigation of the genotoxicity of 60 Hz time-varying magnetic field (MF) from preceding research. Neither a single 30-minute exposure to the CED or to the FED had any obvious biological effects such as DNA double strand break (DSB) and apoptosis in cancerous SCC25, and HeLa cells, normal primary fibroblast IMR90 cells, while exposures of 60 Hz time-varying MF led to DNA damage with induced electric fields much smaller than those used in this experiment. Nor did repetitive exposures of three days or a continuous exposure of up to 144 hours with the CED induce any DNA damage or apoptosis in either HeLa or IMR90 cells. These results imply that the solitary electric field produced by time-varying MF is not a major cause of DSBs or apoptosis in cancer or normal cells.

비전기식 지연형 폭발볼트 개발 (Development of Non-Electric and Delay-Type Explosive Bolt)

  • 이응조;김동진
    • 한국추진공학회지
    • /
    • 제9권3호
    • /
    • pp.60-65
    • /
    • 2005
  • 본 연구는 기존의 폭발볼트와는 달리 작동에 필요한 전원의 공급 없이 수행하면서, 또한 지연기능까지 포함한 비전기식 지연형 폭발볼트에 관한 것이다. 즉 비전기식 작동방법을 이용하여 전원 공급 장치를 없앨 수 있기 때문에 분리장치의 소형화가 가능해졌고, 이를 위하여 기존 폭발볼트의 작동 메카니즘과는 다른 새로운 개념의 메카니즘을 적용하였고, 또한 지연기능을 추가하기 위하여 작동 메카니즘 개발과 별도로 지연장치를 개발하였다. 전원을 사용하지 않고 작동하는 착화장치를 설계하기 위하여 폭발볼트가 결합된 비행체에서 발생하는 공기의 저항력을 이용하였다. 고속으로 비행하는 발사체의 속도를 줄이고 안전한 착륙을 위한 낙하 시스템의 설계에 고려될 수 있는 장치라고 생각된다.

전력 설비 진단을 위한 IED 의 구현 (The Implementation of IED for Diagnosis of Electric Devices)

  • 오재훈
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2007년도 제38회 하계학술대회
    • /
    • pp.1110-1111
    • /
    • 2007
  • These days, the concerns about maintenance and repair of electric facilities for stable and reliable electric power supply are increasing day by day. Because, we can have enormous damages economically and socially from a problem of the facilities, no matter how it is a small one. Especially, electric facilities in our country had been built abruptly from 40 years ago, so it can be thought that here are great amount of old facilities that must be repaired or replaced with new one, and the number would be increased time by time. On this situation, many researchers are studying the efficient and reliable method of maintenance for electric facilities and the results are applied on the facilities gradually by growing interests of operators and managers of the facilities. In this paper, the IED(Intelligent Electronic Devices) for Diagnosis system of electric machines are described. It takes analog data from a sensing device and operates digital processor to get a optimum digital data for diagnosis system. Now, this device is applied on several high voltage substations to diagnose and maintain GIS. Brief schematic of total diagnosis system and the construction of the IED are included in this paper.

  • PDF

저가형 대기전력 차단장치 개발 (Development of a Low-Price Device for Standby Power Cut-off)

  • 이상윤
    • 융합신호처리학회논문지
    • /
    • 제16권3호
    • /
    • pp.115-121
    • /
    • 2015
  • 가정 및 사무실의 전기/전자 기기가 내부 혹은 외부로부터 주 기능 수행을 위한 명령을 기다리고 있는 상태에서 소모되는 대기전력을 차단할 수 있는 장치를 저가로 개발하였다. 대기전력을 줄이기 위한 노력이 선진국들뿐만 아니라 국제적 차원에서 경주되고 있다. 우리나라도 가구당 전자/전기기기 보유대수가 증가되는 추세에 따른 대기전력이 점차 증가하고 있어 전기 에너지 낭비의 큰 요인이 되고 있다. 기존의 대기전력 차단장치는 그 장치 자체의 소비전력이 크고, 구조가 복잡하여 사용 의미를 퇴색시키는 문제점을 안고 있다. 본 논문에서는 기존 제품의 이러한 문제점을 보완시키고 대기전력을 완전히 차단하는 저가형 대기전력 차단장치를 제안한다. 그리고 제안한 대기전력 차단장치를 누전차단기와 콘센트에 적용하여 회로를 설계 및 구현하고 실험을 통하여 그 우수성을 확인하였다.