• 대한전자공학회논문지SD
• /
• 제45권4호
• /
• pp.124-130
• /
• 2008

Double patterning technology (DPT)를 위한 자동 레이아웃 분리 기술을 개발하였다 CMOS 공정이 45nm와 그 이하로 점차 미세화 됨에 따라 리소그래피 해상도를 향상시키는 기술이 요구되고 있다. 최소 거리 규칙을 완화하기 위해 두 개의 마스크로 레이아웃을 나누어 두 번 패터닝 하는 DPT 기술이 기존 리소그래피의 제한을 해소하기 위해 제안되었다. 그러나 레이아웃을 DPT에 적합하게 두 개의 마스크로 나누는 것은 항상 가능하지 않다. 이러한 문제를 해결하기 위해 새로운 자동 스티칭 기술을 개발하였다. 실험 결과는 본 논문에서 제안한 DPT를 위한 자동 레이아웃 분리 방법이 고무적임을 보여준다.

• Journal of Electrical Engineering and Technology
• /
• 제3권2호
• /
• pp.199-206
• /
• 2008

The introduction of competition in electricity markets emphasizes the importance of sufficient transmission capacities to guarantee effective power transactions. Therefore, for the economic and stable electric power system operation, transmission security constrains should be incorporated into the dispatch scheduling problem. With the intent to solve this problem, we decompose a dispatch scheduling problem into a master problem(MP) and several subproblems(SPs) using Benders decomposition. The MP solves a general optimal power flow(OPF) problem while the SPs inspect the feasibility of OPF solution under respective transmission line contingencies. If a dispatch scheduling solution given by the MP violates transmission security constraints, then additional constraints corresponding to the violations are imposed to the MP. Through this iterative process between the MP and SPs, we derive an optimal dispatch schedule incorporating the post-contingency corrective rescheduling. In addition, we consider interruptible loads as active control variables since the interruptible loads can participate as generators in competitive electricity markets. Numerical examples demonstrate the efficiency of the proposed algorithm.

• Transactions on Electrical and Electronic Materials
• /
• 제3권3호
• /
• pp.34-38
• /
• 2002

In this paper, efficiency estimation of toxicity fee fire resistance cable experiments was measured smoke density of toxicity free fire resistance polyolefin insulation material and electric field dependence of tree shape in low density polyethylene (LDPE). One of the most serious causes of failure in high-voltage cables, can be an electrical discharge across an internal gab or void in the insulating material. Treeing due to partial discharge is one of the main causes of breakdown in the insulating materials and reduction of the insulation life. Therefore the necessity for establishing a method to diagnose the aging of insulation materials and to predict the breakdown of insulation and research of the fire resistance character has become important. First, we have studied on electric field dependence of tree shape in LDPE about treeing phenomena occurring on the high electrical field. Second, the measurement method is the attenuation quantity of irradiation by smoke accumulating with in a closed chamber due to non-flaming heat decomposition and flaming combustion. A main cause of fire-growth and generating toxic gas when, it bums, should be dealt with great care in life. safety design. The fire gases were occurred carbon monoxide and decomposition than in polyolefin due to incomplete combustion of PVC, which has high content of carbon in chemical compound.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 1999년도 추계학술대회
• /
• pp.543-563
• /
• 1999

본 연구에서는 특수 설계된 연면방전(Surface discharge induced Plasma Chemical Process, SPCP) 반응기로부터 발생하는 플라스마에 의하여 일산화질소(NO)와 이산화질소($NO_2$)등 유해 환경오염 가스를 주파수, 유량, 농도, 전극재질 및 감은 횟수 등의 공정변수 변화에 따른 분해율, 소비전력 및 소비전압 등을 측정하여 최적의 공정조건과 최대의 분해효율을 얻고자 하였다. 표준시료로서 일산화질소와 이산화질소를 고전압발생기의 주파수(5~50kHz), 유해가스의 체류시간(1~10.5 초)과 초기농도(100~1000 ppm), 전극의 재질(W, Cu, Al), 전극의 굵기(1, 2, 3 mm)및 감은횟수(7회, 9회, 11회)에 대하여 플라스마 연면방전 반응기를 이용하여 분해효율을 구하였다. 유해가스(NO, $NO_2$)의 분해제거 실험결과, 10 kHz의 주파수와 각각 19.8와 20 W의 소비전력에서 각각 94.3, 84.7 %로 가장 높은 분해제거율을 나타내었고, 20 kHz이상에서는 주파수가 커질수록 분해율이 감소하였다. 또한 연면방전 반응기에서 유해가스의 체류시간이 길수록, 그리고 초기농도가 작을수록 분해율은 증가하였다. 방전전극에 대한 영향은 전극의 굵기가 굵을수록 분해율이 증가하여 본 실험의 경우 3 mm의 전극을 사용하였을 때 가장 높은 분해율을 나타내었고, 전극의 재질은 텅스텐을 사용하여 방전한 경우에 가장 높은 분해율을 보였으며 구리, 알루미늄의 순으로 낮아졌다. 방전전극의 감은 횟수에 대한 영향은 7회, 9회, 11회의 순으로 감은 횟수가 많을수록 분해율이 높아짐을 알 수 있었다.

• 자원ㆍ환경경제연구
• /
• 제19권2호
• /
• pp.243-282
• /
• 2010

본 연구는 1991년~2007년간 우리나라 전력산업의 탄소배출에 미치는 요인들과 영향의 정도를 전력 수요측면과 공급측면으로 나누어 요인분해분석을 수행하였다. 전력수요측면에서는 전력사용의 효율성 향상이 배출 감소에 주된 영향을 미치는 반면, 전력을 소비하는 산업의 구조 변화는 오히려 배출을 증가시키는데 기여했음을 확인하였다. 공급측면에서는 탄소배출에 미치는 주요 요인으로 연료혼합, 화력발전효율, 발전구조의 변화 등이 있었으며 분석 결과 전력수요의 증가와 화력발전의 구조 변화가 탄소배출을 증가시키는 주요한 요인으로 작용한 반면 연료효율성은 향상되어 배출을 감소시키는 역할을 한 것으로 나타났다. 이로써 전력산업의 온실가스 감축을 위해 수요차원에서는 전력사용의 효율성을 향상시키고 공급차원에서는 화력발전을 대체하면서 발전 및 배출 효율성을 향상시킬 수 있는 정책이 마련되어야 한다는 것을 알 수 있었다.

• 한국자동차공학회논문집
• /
• 제6권3호
• /
• pp.106-114
• /
• 1998

Cogging torque is often a principal source of vibration and control difficulty in permanent magnet motors, especially at low speeds and loads. For example, reduction of cogging torque is an important specification for DC motors used for electric power stee- ring. This paper examines two motor design techniques, stator tooth notching and rotor pole skewing with magnet pole shaping, for reduction of cogging torque, and the effect of each method on the airgap flux, and the use of the Maxwell stress method and Fourier decomposition to calculate the periodic cogging torque. The analyses show that the cogging torque can be nearly eliminated by the suggested designs, with minimal scacrifice of output torque.

• Journal of Electrical Engineering and Technology
• /
• 제8권1호
• /
• pp.1-10
• /
• 2013

The power industry is currently facing many challenges, due to the new environment created by the introduction of smart grid technologies. In particular, the large-scale deployment of electric vehicles (EVs) may have a significant impact on demand for electricity and, thereby, influence generation and transmission system planning. However, it is difficult to deal with uncertainties in EV charging loads using deterministic planning methods. This paper presents a two-stage stochastic decomposition method with Latin-hyper rectangle sampling (LHRS) to solve the integrated generation and transmission planning problem incorporating EV deployment. The probabilistic distribution of EV charging loads is estimated by Latin-hyper rectangle sampling (LHRS) to enhance the computational performance of the proposed method. Numerical results are presented to show the effectiveness of the proposed method.

• Journal of Electrochemical Science and Technology
• /
• 제7권3호
• /
• pp.199-205
• /
• 2016

We present the electrochemical performance of electric double layer capacitors (EDLCs) assembled with pyrrolidinium (Pyr)-based ionic liquid electrolytes at 55 ℃. Cations with various alkyl chain lengths were employed in Pyr-based ionic liquids to investigate the effect of cation structure on the cycling stability of EDLCs. The EDLCs exhibited initial specific capacitances ranging from 122.4 to 131.6 F g⁻¹ based on activated carbon material at 55 ℃. Cycling data and XPS results demonstrate that Pyr-based ionic liquid with longer alkyl chain is more effective for enhancing the cycling stability of EDLC by suppressing the reductive decomposition of pyrrolidinium cations during cycling at high temperatures.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집 Vol.14 No.1
• /
• pp.251-254
• /
• 2001

In this paper, we analyzed the properties change of electric wire when the thermal stress was applied to NFR-8 and FR-PVC 600[V] wire. Messurement is made of the attenuation of a light beam by smoke accumulating with in a closed chamber due to nonflaming pyrolytic decomposition and flaming combustion. Results are expressed in terms of specific optical density which is derived from a geometrical factor and the measured optical density a measurement characteristic of the concentration of smoke. Referenced documents were ASTM E662 standard test method for specific Ds genalated by solid materials. The furnace control system shall maintain the required irradiance level under steady-state condition with the chamber door closed of $2.5{\pm}0.04[w/cm^{2}]$ for 20 min. According to the results of the smoke density analysis of NFR-8 and FR-PVC the highest decomposition flaming smoke density range of NFR-8 and FR-PVC were 25.2 to 37.5 and 51.1 respectively. Nonflaming smoke density range of NFR-8 and FR-PVC were 100.4 to 112.2 and 126.5 to 398.8. The amount of carbon monoxide generated was found to be much higher in FR-PVC decomposition than in NFR-8 due to incomplete combustion of FR-PVC which has high content of carbon in compound.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집
• /
• pp.251-254
• /
• 2001

In this paper, we analysed the properties change of electric wire when the thermal stress was applied to NFR-8 and FR-PVC [600] wire. Measurement is made of the attenuation of a light beam by smoke accumulating with in a closed chamber due to nonflamining pyrolytic decomposition and flaming combustion. Results are expressed in terms of specific optical density which is derived from a geometrical factor and the measured optical density a measurement characteristic of the concentration of smoke. Referenced documents were ASTM E662 standard test method for specific Ds generated by solid materials. The furnace control system shall maintain the required irradiance level under steady-state condition with the chamber door closed of 2.5${\pm}$0.04[w/$\textrm{cm}^2$] for 20 min. According to the results of the smoke density analysis of NFR-8 and FR-PVC the highest decomposition flaming smoke density range of NFR-8 and FR-PVC were 7.2 to 77.5 and 51.1 respectively. Nonflaming smoke density range of NFR-8 and FR-PVC were 100.4 to 112.2 and 126.5 to 398.8. The amount of carbon monoxide generated was found to be much higher in FR-PVC decomposition than in NFR-8 due to incomp1ete combustion of FR-PVC which has high content of carbon in compound.