• 대한임베디드공학회논문지
• /
• 제1권2호
• /
• pp.82-89
• /
• 2006

It appears that it is possible for us to make a wireless communication of even home-network system within car by integrating with the Ubiquitous such as mobile phone, wireless Internet, GPS and DMB in the future. If the present wireless surroundings within the car are connected with very high-speed wireless network as measurement system for wireless communication surroundings within this car in the future, it will develop the complicated communication conditions such as safe checkup, communication between systems within car, and wireless communication for user entertainment unlike universal communication conditions. Accordingly, there is the necessity of the device that can measure the interference of electric wave, communication speed and communication quality by a kind of each car. This paper aims at making the real measurement device to raise the reliability of each Application for inquiring into the interference about each other in the frequency band used under Telematics surroundings.

• 반도체디스플레이기술학회지
• /
• 제15권4호
• /
• pp.61-66
• /
• 2016

This paper presents the implementation for a network structure of railway cars using a point to point communication. Most of network's representative specifications for a train are the FIP (Field Bus), MVB (Multifunction Vehicle Bus), CAN and WTB (Wire Train Bus) which is used by ALSOM, SIEMENS and BOMBADIER as major in this field. These networks in a physical layer use a multi-drop method, connected from $1^{st}$ car to $n^{th}$ car of a train through a cable without any extra services such as an electric part, amplifier. However waveforms which is passed through a long cable in the multi-drop are distorted by a capacitance or resistance of the cable or environments. Also since using a cable connected directly from $1^{st}$ car to $n^{th}$ car, if over two trains make double head, it isn't easy to distinguish ID for each railway cars. So by using the point to point network per each car, it is able to reduce a distortion. Also since reducing distortion, this communication speed can be been higher and transmit and receive any packets more stably. Using proposed token in a packet, this can make ID per each railway car automatically. Finally experimental results show the good performance and effectiveness of the proposed method.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.1874-1879
• /
• 2004

This paper validates new type electric power steering (EPS) system which is driven by a uni-direction rotational motor and two electromagnetic clutches. The assist motor of the new type EPS produces a torque for assisting the steering in only one direction and two electromagnetic clutches transmit the assist torque to the pinion gear in either left or right direction with respect to the steering rotation. In order to evaluate the static and dynamic characteristics of the new type EPS, the EPS has been modeled by using the well known customized software such as MSC.ADAMS and MSC.CarSim. The ADAMS software has been used to investigate the static characteristics of the proposed system. ADAMS, however, can not describe dynamics of a vehicle and perform the simulation under the various road conditions. Thus the dynamic characteristics of the vehicle including the EPS are analyzed very well by using the CarSim software. A sinusoidal steering input command is applied to the propose EPS system in order to evaluate the static characteristics, while the double lane changes are applied to the vehicle with the EPS in order to evaluate the dynamic performance. Through a series of simulations, we can conclude that the propose EPS shows the stable dynamic characteristics when the rotational direction is changed.

• 한국산업융합학회 논문집
• /
• 제22권3호
• /
• pp.273-280
• /
• 2019

Carbon fiber composite laminate has been widely used in the area of sports applications such as race car, golf club, fishing rods, yacht. In this study, carbon fiber composite laminate was used in the rear upright of leisure purposed small size single-seat electric race car to reduce its unsprung mass of suspension system. The focus of this research is to investigate in finding optimal stacking lay-up of rear upright laminated with carbon fiber composite in the early design phase. Forces transferred from circuit road to rear upright were estimated through MBD(Multi-Body Dynamics)model of the rear suspension geometry. To evaluate the strength of the rear upright laminated with carbon fiber composite which generally behaves in an anisotropic or orthotropic manner, FEA(Finite Element Analysis) model suitable for composite materials was built followed by its strength was evaluated depending on different stacking lay-up. The result showed that Symmetric stacking lay-up [$45^{\circ}/-45^{\circ}/90^{\circ}/0^{\circ}$]s for frontal area and symmetric stacking lay-up with 1mm aluminum core [$45^{\circ}/-45^{\circ}/90^{\circ}/Core$]s for rear area were most suitable of 16 lay-up cases from the side of both strength based on Tasi-wu failure index and weight.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 춘계학술대회논문집
• /
• pp.19-26
• /
• 2001

There passed almost 15 years since our sound quality studies in Japan related to the emitted noise from the industrial products have been started. The sound under consideration are interior and exterior noise from cars, noise from the electric appliances such as electric shavers, electric cleaners and washing machines and the sound emitted from earth moving machines and etc. After a little while since sound quality studies have been started, the products with better sound are gradually on sale on the market.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2006년도 춘계학술대회 논문집
• /
• pp.91-96
• /
• 2006

This paper shows quantatively the cause of electric power induction that was occured by flowing current when high speed electric car travels and the investigation of earth potential upswing and animal damage example by rail leakage current.

• 디지털산업정보학회논문지
• /
• 제14권1호
• /
• pp.15-25
• /
• 2018

ISO/IEC 15118 is a standard for communications and services for electric vehicle charging infrastructure. Although this standard deals only with data communication between an electric vehicle and a charge station, communication with the outside is essential for establishing an authentication system for vehicle certification and V2G service for electric power transmission. In this study, it was designed to verify the information of electric car charging infrastructure in electric power system through communication link between ISO/IEC 15118 electric vehicle model and IEC 61850 standard MMS protocol. This is demonstrated in the field so that the electric vehicle communication data is linked with the micro grid management system. This could be used as an element technology in other distributed power sources as well as electric cars in the future.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 춘계학술대회 논문집
• /
• pp.1378-1387
• /
• 2011

Seoul Metropolitan Rapid Transit Corporation - which is operating the subway lines No. 5, 6, 7 and 8 of Seoul's subway - has been operating a variety of motor cars and rail inspection vehicles to transport workers and materials into the tunnel at night after the daily revenue service for the maintenance of tunnel structure and track. However, the air quality in tunnels has been contaminated due to the operation of diesel engine cars, and rail inspection vehicles are now having higher chances of risks since the lightweight vehicles made with aluminum bogie became too obsolete. In this study, MRT type eco-friendly electric multi-inspection car has been elaborated for the purpose of improvement of tunnel environment and replacement of motor cars and rail inspection vehicles.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 A
• /
• pp.278-280
• /
• 1996

This paper presents a high performance AC propulsion system for electric car to improve traction capability. The presented VVVF inverter was composed of as GTO thyristor and the the controller was fully digitalized by using 32bit DSP. The improved PWM algorithms and the new adhesion control were adapted to improve traction characteristics. This system could be possible the higher reliability and flexibility. The field test results showed the higher performances characteristics of the presented system.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 A
• /
• pp.373-375
• /
• 1997

In this paper, we present IGBT VVVF inverters as a 1C1M propulsion system for electric car. These inverters are composed of high power IGBT's and controlled by compact control units. The control unit performs full digital control by using 32bit DSP and microcontroller. By using CAN-bus, high speed network is constructed within four control units. The stack is simplified and optimized by using plate bus and IGBT driver units of hybrid-type.