• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2008년도 하계학술발표대회 논문집
• /
• pp.1155-1160
• /
• 2008

In the present study investigated the heat dissipation characteristics of the natural convection type radiator by using the latent heat from a solid-liquid PCM(Phase Change Material). Total radiator volume size is $423{\times}295{\times}83\;mm$ and PCM tank size is $398{\times}270{\times}26\;mm$. The objective was elapsed time lower than maximum operating temperature. Experimental condition, in order to study the effects of the phase-change phenomenon, carried out the various mass flow rate, input electric power, and heat of fusion temperature of two type PCMs. For the above experimental conditions, the cooling performance by using the latent heat showed that heat absorption rate performs for about 3 hours from using PCM $38^{\circ}C$. However, cooling performance by using PCM $50^{\circ}C$ showed higher than surface temperature of heater block because of heat of fusion.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 춘계학술대회 논문집
• /
• pp.1909-1915
• /
• 2008

The brake systems of the rolling stocks are generally consisted of electrical and mechanical brake systems. Because of its inherent structure of the each brake system, the electrical brake system is mainly used at the high speed range while the mechanical brake system is used at the relatively lower speed range. It is desirable for the rolling stocks to apply the entire electrical brake system. However, since the brake force from electric brake system is not enough to stop the rolling stock within the legal stop distance. Therefore, the mechanical brake system is indispensable to rolling stocks. In general, the vast majority of the world trains are equipped with mechanical braking systems which use compressed air as the force to push block on to wheels or pads on to discs. These mechanical systems are known as air brake or pneumatic brakes. For the air brake system, basically huge scale air compressor is equipped and the long pipe line is complexively connected. Since mass of these air brake components, it is difficult to be a light weight equipment and the long pipe line raise the maintenance problem. In order to overcome these problems of air brake system, the hydraulic brake system is proposed in this research. The hydraulic brake system makes the whole weight of brake equipment be light and large braking force can be applied. Therefore, in this research, the validity and advantages of applying the hydraulic brake system are reviewed.

• Bulletin of the Korean Chemical Society
• /
• 제27권2호
• /
• pp.281-285
• /
• 2006

Microbial fuel cells (MFC) stacked with bipolar plates have been constructed and their performance was tested. In this design, single fuel cell unit was connected in series by bipolar plates where an anode and a cathode were made in one graphite block. Two types of bipolar plate stacked MFCs were constructed. Both utilized the same glucose oxidation reaction catalyzed by Gram negative bacteria, Proteus vulgaris as a biocatalyst in an anodic compartment, but two different cathodic reactions were employed: One with ferricyanide reduction and the other with oxygen reduction reactions. In both cases, the total voltage was the mathematical sum of individual fuel cells and no degradation in performance was found. Electricity from these MFCs was stored in a supercapacitor to drive external loads such as a motor and electric bulb.

• 한국광학회지
• /
• 제6권4호
• /
• pp.302-309
• /
• 1995

상온에서 $1.55{\mu}m$ 를 발진하는 격자 정합된 InGaAs/InGaAsP 양자우물 레이저를 설계하여 주입 운반자 밀도와 온도의 함수로 이득 곡선을 계산하였다. 밴드 구조와 운동량 행력 요소의 계산에는 블록대각화된 8*8 이차 k.p 해밀토니안에 근거한 변환행렬법을 사용하였다. 이 격자정합된 양자우물은 TE 모우드로 발진하였다. 온도가 증가함에 따라 발진파장이 길어졌고, 투명 운반자 밀도는 증가하였으며 미분이득은 감소하였다. 이득 곡선의 온도의존도는 밴드 구조의 온도의존성과 페르미 함수의 온도의존성에 기인하는데 이중 후자의 효과가 주도적인 것이었다.

• 한국태양에너지학회 논문집
• /
• 제31권5호
• /
• pp.134-139
• /
• 2011

Since large and small scale photovoltaic(PV) systems have been commercialized in many countries, it is necessary to assess the effects of PV systems on the electric power system. For this, the development of accurate simulation model of PV arrays is very important. PSCAD/EMTDC, a widely used simulation tool for analyzing the transient behavior of electrical apparatus and networks, does not have a standard model of a PV array. Therefore in order to simulate the PV array, users have to develop their own simulation model. However, the block-diagram-based model is very complicated, and it is hard to modify the model parameters. In this study, we develop the user-defined model of a PV array by using the Design Editor, which is provided by PSCAD program. The mathematical model of a PV array and the method to determine the parameters of nonlinear I-V equation are implemented in a Fortran code. The graphical user interface provides the users with easy and simple way to modify the PV array parameters and simulation conditions. In order to help the users, this model also provides the parameters of 10 commercial PV arrays.

• 정보처리학회논문지B
• /
• 제9B권2호
• /
• pp.231-236
• /
• 2002

유효한 무성음이 시스템 노이즈와 합성됐을 경우 유효한 무성음 추출에 많은 어려움이 있으나 본 논문에서는 유효한 무성음 추출에 있어 이산 웨이브렛 변환을 이용한 신호 해석 내용을 기반으로 주파수와 그 위치를 블록별로 머징 규칙으로 유효 여부를 결정하기 때문에 노이즈가 많은 환경에서도 유효한 무성음 추출이 가능하다. 머징 알고리즘은 음성만으로도 처리 매개변수를 결정할 수 있고 시스템 잡음에 대하여서도 독립적이기 때문에 유효한 음성을 추출하는데 매우 효과적이다. 실험 결과를 통하여 유효한 음성 추출 처리 과정에서 보다 향상된 결과를 보이고 있으며 특히 고주파 노이즈에 대한 강한 적응력을 제시하고 시스템 구현에도 용이한 시스템 튜닝을 가능케 한다.

• Bulletin of the Korean Chemical Society
• /
• 제27권4호
• /
• pp.519-523
• /
• 2006

Poly(dimethyl siloxane) (PDMS) has been employed as a microchip material for DNA separation in microfluidic condition. Different sieving molecules such as cellulose derivatives having glucose building block (methyl cellulose (MC), hydroxyethyl cellulose (HEC), and hydroxypropyl methyl cellulose (HPMC)) and polyethylene oxide (PEO) having linear (ring-opened ethylene oxide) unit were used and their performance was compared in terms of separation efficiency and resolution. In general, PEO showed better separation performance than cellulose derivatives probably due to the nature of linear shape polymer conformation. It was possible to perform at least 15 consecutive running with 1.2% PEO at the electric field strength around 200 V/cm. Fast analysis of the standard $\Phi$X 174 RF DNA/Hae III (less than 130s) was obtained with the number of the theoretical plate around 250,000/m. Our PMDS microchip was applied to the measurement of CAG repeat number, which is related to male infertile disease.

• Animal cells and systems
• /
• 제6권4호
• /
• pp.327-333
• /
• 2002

Among the silk glands in the black widow spider Latrodectus mactans, the ampullate one is the most predominant gland in both sexes, and is com-posed of three functional parts - excretory duct, storage ampulla and convoluted tail regions. This experiment was performed using mechanical pulling stimulation with electric motor equipment to reveal a correlation between silk usage and silk producing system in this poisonous spider. The mature secretory products in glandular epithelium are closely packed and appear as electron-opaque spherical vesicles. A part of the vesicles with fine fibrillar paracrystalline texture seems to store some proteins which will function at the time of final assembly into fibrils. Most of the secretory silk products which originated from the rough endoplasmic reticula of the glandular epithelial cells are grown by fusion with surrounding small vesi-cles. However, the Golgi complex does not seem to play an important role in this process of secretion. According to progressive maturation of secre-tory silk product, these granules are progressively filled with a fine fibrillar material, and thus appear much more electron-dense than those of earlier states. When the secretory product is extruded from the glandular cavity, the epithelium is rapidly changed to a thinner layer of tall columnar cells with less definitive cell membranes. After extruding there ave a few secre-tory droplets within these cells, thus causing this region to stain much lighter.

• Journal of Oral Medicine and Pain
• /
• 제26권2호
• /
• pp.157-160
• /
• 2001

Facial nerve paralysis(or Bell's palsy) which commonly occurs unilaterally, gives rise to paralysis of facial expression muscle. This condition is classified into symptomatic facial nerve paralysis due to intracranial tumor, post operative trauma, etc. and idiopathic facial nerve paralysis. To explain the etiology of idiopathic facial nerve paralysis, many hypothesis including ischemic theory, viral infection, exposure to cold, immune theory etc. were suggested, but there is no agreement at this point. The method to evaluate the facial nerve paralysis, when it occurs, consists of three stage scale method, image thechnics like CT and MRI, laboratory test to examine the antibody titers of viral infection, neurophysiologic test to evaluate the degree and prognosis of paralysis. Treatment includes medication, stellate ganglion block(SGB), surgery, physical therapy and other home care therapy. In medication, systemic steroids, vitamins, vasodilating-drug and ATP drugs were used. SGB was also used repeatedly to attempt the improvement of circulation and to stimulate the recovery of nerve function. Physical therapy including electric acupuncture stimulation therapy(EAST) and hot pack was used to prevent the muscle atrophy. When No response was showed to this conservative therapies, surgery was considered. After treating two patients complaining of Bell's palsy with medication(systemic steroids) and EAST, favorable result was obtained. so author report the case of facial nerve paralysis.

• The Korean Journal of Pain
• /
• 제18권1호
• /
• pp.48-51
• /
• 2005

Although the atlantoaxial joint is the most common site of rheumatoid arthritis, our patient had no symptoms or signs suggestive of rheumatoid arthritis. The atlantoaxial joint is frequently involved in degenerative osteoarthritis, especially in elderly patients. An 81-year old man presented with severe intermittent electric shock like, lancinating pain from the occipital to the temporal and parietofrontal areas. He also had neck pain and a limited range of motion. After many examinations and laboratory tests, at the department of neurology and neurosurgery, he was diagnosed with idiopathic neuralgia. The diagnosis of atlantoaxial joint syndrome was confirmed, and treated successfully with atlantoaxial joint block.