• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 추계학술대회논문집 II
• /
• pp.1202-1206
• /
• 2001

The paper presents the dynamic stability of a vertical cantilevered pipe conveying fluid and having translational linear spring supports. Real pipe systems may have some elastic hanger supports or other mechanical attached parts., which can be regarded as attached spring supports. Governing equations are derived by energy expressions, and numerical technique using Galerkin's method is applied to discretize the equations of small motion of the pipe. Effects of spring supports on the dynamic stability of a vertical cantilevered pipe conveying fluid are fully investigated for various locations and spring constants of elastic supports.

• 한국소음진동공학회논문집
• /
• 제12권12호
• /
• pp.979-985
• /
• 2002

The paper presents the dynamic stability of a vertical cantilevered pipe conveying fluid and haying translational linear spring supports. Real pipe systems may have some elastic hanger supports or other mechanical attached parts. which can be regarded as attached spring supports. Governing equations are derived by energy expressions, and numerical technique using Galerkin's method is applied to the equations of small motion of the pipe. Effects of spring supports on the dynamic stability of a vortical cantilevered pipe conveying fluid are fully investigated for various locations and spring constants of elastic supports.

• Structural Engineering and Mechanics
• /
• 제52권5호
• /
• pp.1033-1049
• /
• 2014

The free vibration of functionally graded material (FGM) beams on an elastic foundation and spring supports is investigated. Young's modulus, mass density and width of the beam are assumed to vary in thickness and axial directions respectively following the exponential law. The spring supports are also taken into account at both ends of the beam. An analytical formulation is suggested to obtain eigen solutions of the FGM beams. Numerical analyses, based on finite element method by using a beam finite element developed in this study, are performed in order to show the legitimacy of the analytical solutions. Some results for the natural frequencies of the FGM beams are given considering the effect of various structural parameters. It is also shown that the spring supports show the greatest effect on the natural frequencies of FGM beams.

• 소음진동
• /
• 제4권4호
• /
• pp.469-478
• /
• 1994

This paper desfcribes the formulation for the analysis of the free vibration of a circular cylindrical shell with elastic supports by the transfer influence coefficient method. This method was developed on the base of the concept of the successive transmission of dynamic influence coefficients. The analysis algorithm for circular cylindrical shell elastically restrained by springs, which plays an important role in many industrial fields, is discussed. The supporting springs have the axial, circumferential, radial and rotational spring constants uniformly distributed along the circumference of the shell. The simple computational results on a personal computer demonstrate the validity of the present method, that is, the numerical high accuracy, the high speed analysis method and the flexibility for programming, compared with results of the transfer matrixmethod and reference. We also confirmed that the present algorithm could obtain the solutions of high accuracy for system with a number of intermediate rigid supports. And we could easily treat the intermediate support and all boundary conditions by adequately varying the values of spring constants.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1994년도 추계학술대회 논문집
• /
• pp.408-413
• /
• 1994

The paper describes the vibration characteristics of the mechanical system consisting of a uniform cantilevered Timoshenko beam with a guided mass and an elastic spring supports. The free end of the beam does not rotate and the spring attatched to the guided mass is elastically restained against translation. The effect of magnitudes, rotary inertia and the size of the guided mass on the vibration characteristics is fully investigated by the numerical simulation using FEM and experiment. In order to verify the eigenvalue sensitivity for considered system, comparison exact solutions with FEM are conducted, and a good agreement between two solutions is also highlighted.

• 한국해양공학회지
• /
• 제6권1호
• /
• pp.69-77
• /
• 1992

The natural frequencies of a beam on elastic foundation are investigated in the present paper. The inhomogeneous elastic foundation can be modelled as a combination of distributed translational spring, rotational spring, intermediate supports and dampers. The natural frequencies and mode shapes of the system are obtained by using the Galerkin's method, and also compared with the results in the literature. Furthermore, the natural frequencies of the beam with elastically mounted masses, which can be used as vibration absorbers, are obtained by an efficient numerical scheme suggested in the present paper.

• 한국정밀공학회지
• /
• 제13권2호
• /
• pp.176-184
• /
• 1996

The paper describes the vibration characteristics of the mechanical system consisting of a uniform Timoshenko beam with a guided mass and an elastic spring support. The free end of the beam does not rotate and the spring attatched to the guided mass is elastically restrained against translation. The guided mass is assumed to be a rigid body having a finite size, but not a mass point as it has been assumed so far. The effect of magnitudes, rotary inertia and the size of the guided mass on the vibration characteristics is fully investigated by the numerical simulation using FEM and experiment. In order to verify the eigenvalue sensitivity for considered system, comparison exact solutions with FEM is conducted, and a good agreement between two solutions is also highlighted.

• 한국강구조학회 논문집
• /
• 제11권2호통권39호
• /
• pp.201-212
• /
• 1999

탄성 경계에 의해 지지된 보는 브레이스된 보나 철도 궤도와 같은 구조 부재로서 사용된다. 이러한 탄성 경계는 단면의 임의의 점에 위치할 수 있다. 본 논문은 탄성 경계를 가진 보의 탄성 좌굴에 미치는 경계의 편심과 강성의 효과를 고찰하였다. 유한 요소 정식화를 통해 탄성 경계를 가진 보-요소와 해석 프로그램을 개발하였다. 탄성 경계는 탄성 스프링 요소를 사용하였으며 탄성 경계의 편심을 고려하기 위하여 옵셋(offset) 기법을 사용하였다. 보-요소는 딤 자유도를 고려하여, 요소당 14개의 자유도를 갖는 직선 보-요소를 사용하였다. 많은 수치 해석을 통해, 본 연구에서 개발한 좌굴 해석 프로그램이 탄성 경계를 가진 보의 탄성 좌굴 하중과 모드를 정확하게 산출함을 알 수 있다.

• 한국방재학회 논문집
• /
• 제8권3호
• /
• pp.11-21
• /
• 2008

여러 가지 하중을 받는 임의의 탄성 경계 지지된 판과 쉘의 기하학적 선형 및 비선형해석을 수행하였다. 가정변형률 9절점 쉘 요소를 이용하였으며, 임의의 탄성 경계 지지를 표현하기 위해 6개의 자유도를 갖는 스프링 요소가 사용되었다. 탄성 경계지지 구조물 해석의 응용을 위하여, 여러 형태의 단부 지지를 받는 판과 쉘이 분석되었으며, 이들 단부 지지에 대한 휨 거동을 정확히 얻을 수 있었다. 6개의 스프링으로 표현된 탄성 경계 지지 조건에 대하여 적절한 결과를 얻을 수 있었다. 해석 결과로부터 본 연구의 해석 방법이 임의의 탄성 경계 조건을 갖는 판과 쉘의 거동을 해석하는데 폭넓게 사용될 수 있음을 알 수 있었다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 추계학술대회논문집
• /
• pp.815-818
• /
• 2006

This paper deals with the free, in-plane vibrations of curved members with the translational(radial and tangential directions) and rotational springs at the ends. The governing differential equations for the circular curved member are solved numerically using the corresponding boundary conditions. The lowest three natural frequencies and the corresponding mode shapes are obtained over a range of non-dimensional system parameters: the subtended angle, the slenderness ratio, the translational spring stiffness, and the rotational spring stiffness.