• Interaction and multiscale mechanics
• /
• 제4권2호
• /
• pp.85-105
• /
• 2011

The influence of surface elasticity and surface residual stress on the elastic field of an isotropic nanoscale elastic layer of finite thickness bonded to a rigid material base is considered by employing the Gurtin-Murdoch continuum theory of elastic material surfaces. The fundamental solutions corresponding to buried vertical and horizontal line loads are obtained by using Fourier integral transform techniques. Selected numerical results are presented for the cases of a finite elastic layer and a semi-infinite elastic medium to portray the influence of surface elasticity and residual surface stress on the bulk stress field. It is found that the bulk stress field depends significantly on both surface elastic constants and residual surface stress. The consideration of out-of-plane terms of the surface stress yields significantly different solutions compared to previous studies. The solutions presented in this study can be used to examine a variety of practical problems involving nanoscale/soft material systems and to develop boundary integral equations methods for such systems.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 추계 학술발표회 3차
• /
• pp.24-30
• /
• 2010

The void ratio and elastic moduli are design parameters used in geotechnical engineering to understand soil behavior. Elastic and electromagnetic waves have been used to evaluate the various soil characteristics due to high resolution. The objective of this study is to evaluate the void ratio and elastic moduli based on elastic wave velocities and electrical resistivity. The Field Velocity Resistivity Probe (FVRP) is developed to obtain the elastic and electromagnetic wave profiles of soil during penetration. The Piezoelectric Disk Elements (PDE) and Bender Elements (BE) are used as transducers for measuring the elastic wave velocities such as compressional and shear wave velocities. The Electrical Resistivity Probe (ERP) is also installed for capturing the electrical resistivity profile. The application test is carried out on the southern coast of the Korean peninsula. The field tests are performed at a depth of 6~20 m, at 10 cm intervals for measuring elastic wave velocities and at 0.5cm intervals for measuring electrical resistivity. The elastic moduli such as constraint and shear moduli are calculated by using measured elastic wave velocities. The void ratios are also evaluated based on the elastic wave velocities and the electrical resistivity. Furthermore, the converted void ratios by using FVRP are compared with the volumetric void ratio obtained by a standard consolidation test. The comparison shows that the void ratios based on the FVPR match the volume based void ratio well. This study suggests that the FVRP may be a useful device to effectively determine the elastic moduli and void ratio in the field.

• 한국음향학회지
• /
• 제38권5호
• /
• pp.511-521
• /
• 2019

본 연구에서는 무한 유체에 놓여있는 유한 길이의 탄성 원통 쉘에 외부에서 비스듬히 평면파가 입사할 때 발생하는 음향 산란 현상을 이론적으로 연구했다. 유한 길이의 원통 쉘에서는 해석적인 산란 해가 존재하지 않기 때문에, Kirchhoff 가정을 적용한 Ye의 산란 기법[Z. Ye, J. Acoust. Soc. Am. 102, 877-884 (1997)]을 사용했다. 탄성 원통 쉘의 특성은 3차원 탄성파 이론을 적용하여 구현했으며 원통 쉘 내부의 유체를 고려했다. 유도된 해석 해를 이용하여 내부 유체가 산란 음장에 미치는 효과, Rayleigh 변수에 대한 산란 음장, 탄성 재질의 변화에 따른 먼 거리 산란 함수를 살펴보았다.

• 대한토목학회논문집
• /
• 제30권2C호
• /
• pp.85-93
• /
• 2010

전단 강성은 지반 거동을 이해하기 위한 필수적인 요소로 인식되고 있으며, 특히 탄성계수 및 간극비는 구조물의 기본적인 설계 정수로서 그 중요성이 점차 증가하고 있다. 본 연구의 목적은 전단파와 압축파 같은 탄성파 및 전기비저항 측정이 가능한 현장 탄성파 및 전기비저항 측정 장비(FVRP)를 개발하고, 이를 이용하여 대상지반의 탄성계수 및 간극비를 산정하는 것이다. 압축파 및 전단파는 각각 피에조 디스크 엘리먼트와 벤더 엘리먼트를 이용하여 측정하였다. 그리고 전기비저항은 소형 전기비저항 측정 프로브를 제작하여FVRP 선단에 설치하여 측정하였다. 개발된 장비는 실내의 대형토조와 현장에 적용되었다. 대형 토조실험의 경우, 모래와 점토를 슬러리 상태에서 혼합하여 지반을 조성한 후 상재하중을 가하여 조성된 지반을 압밀 시킨 후 진행되었으며, 탄성파 및 전기비저항의 측정은 매 심도 1cm 간격으로 수행되었다. 현장 실험은 남해안 지역에서 수행되었으며, 탄성파 및 전기비저항 측정은 관입심도 6m부터 20m까지 10cm 간격으로 수행하였다. 토조 및 현장 실험을 통해 측정된 탄성파와 전기비저항은 이론적인 관계식을 이용하여 탄성계수 및 간극비로 환산되었다. 탄성파와 전기비저항을 이용한 간극비는 부피를 이용하여 산정한 간극비와 유사한 값을 나타내었다. 본 연구에서 개발된 탄성파와 전기비저항을 동시에 측정할 수 있는 FVRP는 연약지반의 탄성계수 및 간극비 산정에 유용한 장비가 될 수 있음을 보여준다.

• Steel and Composite Structures
• /
• 제23권6호
• /
• pp.623-631
• /
• 2017

Present paper deals with the temperature-dependent buckling analysis of sandwich nanocomposite plates resting on elastic medium subjected to magnetic field. The lamina layers are reinforced with carbon nanotubes (CNTs) as uniform and functionally graded (FG). The elastic medium is considered as orthotropic Pasternak foundation with considering the effects of thermal loading on the spring and shear constants of medium. Mixture rule is utilized for obtaining the effective material properties of each layer. Adopting the Reddy shear deformation plate theory, the governing equations are derived based on energy method and Hamilton's principle. The buckling load of the structure is calculated with the Navier's method for the simply supported sandwich nanocomposite plates. Parametric study is conducted on the combined effects of the volume percent and distribution types of the CNTs, temperature change, elastic medium, magnetic field and geometrical parameters of the plates on the buckling load of the sandwich structure. The results show that FGX distribution of the CNTs leads to higher stiffness and consequently higher buckling load. In addition, considering the magnetic field increases the buckling load of the sandwich nanocomposite plate.

• Computers and Concrete
• /
• 제19권1호
• /
• pp.1-6
• /
• 2017

Prestressed concrete I-girders are subject to different load types at their construction stages. At the time of strand release, i.e., detensioning, prestressed concrete girders are under the effect of dead and prestressing loads. At this stage, the camber, total net upward deflection, of prestressed girder is summation of the upward deflection due to the prestressing force and the downward deflection due to dead loads. For the calculation of the upward deflection, it is generally considered that prestressed concrete I-girder behaves linear-elastic. However, the field measurements on total net upward deflection of prestressed I-girder after detensioning show contradictory results. In this paper, camber calculations with the linear-elastic beam and elastic-stability theories are presented. One of a typical precast I-girder with 120 cm height and 31.5 m effective span length is selected as a case study. 3D finite element model (FEM) of the girder is developed by SAP2000 software, and the deflections of girder are obtained from linear and nonlinear-static analyses. Only geometric nonlinearity is taken into account. The material test and field measurement of this study are performed at prestressing girder plant. The results of the linear-elastic beam and elastic-stability theories are compared with FEM results and field measurements. It is seen that the camber predicted by elastic-stability theory gives acceptable results than the linear-elastic beam theory while strand releasing.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.163-170
• /
• 2005

In this paper, the rock bolts, soil nails with filling grout and the micro-piling with injecting grout by pressure were applied for the stabilization of the cut slopes consisting of sedimentary rocks, igneous rocks and metamorphic rocks respectively. The field measurements and 3-D FEM analyses to find out mobilized tensile stresses of the grouted-reinforcing members installed in the drilled holes were executed on each site. With assuming the increments of the cohesive strength in the improved ground, the back analysis using direct calibration approach of changing the elastic modulus of the ground was used to find out the improved elastic modulus which yields the same tensile stresses from field measurements. The results of back analysis show that the elastic modulus of the improved ground were 4 to 6 times as large as the elastic modulus of original ground. Consequently, the design for slope reinforcement to be more rational, it is proposed that not only the improved cohesive strength is to be used in the incremental ranges on well-known previous proposed data, but also the increased elastic modulus which is about 5 times as large as the original elastic modulus is to be considered in design.

• 한국음향학회지
• /
• 제18권2호
• /
• pp.83-89
• /
• 1999

본 논문에서는 유한 원통셸의 강제진동을 탄성파를 이용하여 해석하였다. 원통셸의 강제 진동장을 나타내기 위하여 변위벡터를 이용하였으며, 진동장을 여러 특성과 방향을 갖고 전파하는 탄성파들에 의한 영향의 합으로써 나타내었다. 또한 양 끝단에서 파동의 반사 현상을 고려하는 반사행렬을 이용하였다. 그리고 본 해석 방법을 통하여 반사행렬을 쉽게 구할 수 있기 때문에, 원통셸 양 끝단에서 탄성파들간의 파동변환을 용이하게 예측할 수 있도록 하였다. 이러한 해석 방법을 이용하여 자유단을 갖고 점가진력에 의해 강제 진동하는 유한 원통셸의 진동장에 대한 수치 계산을 수행하였다. 또한 진동장을 이루는 탄성파들의 기여도와 특성, 그리고 원통셸 끝단에서 탄성파들간의 파동변환을 분석함으로써 본 해석 기법의 유용성을 보였다.

• Steel and Composite Structures
• /
• 제25권2호
• /
• pp.187-196
• /
• 2017

In this work, transient thermo-piezo-elastic responses of an infinite functionally graded piezoelectric (FGPE) plate whose upper surface suffers time-dependent thermal shock are investigated in the context of different thermo-piezo-elastic theories. The thermal and mechanical properties of functionally graded piezoelectric plate under consideration are expressed as power functions of plate thickness variable. The solution of problem is obtained by solving the corresponding finite element governing equations in time domain directly. Transient thermo-piezo-elastic responses of the FGPE plate, including temperature, stress, displacement, electric intensity and electric potential are presented graphically and analyzed carefully to show multi-field coupling behaviors between them. In addition, the effects of functionally graded parameters on transient thermo-piezo-elastic responses are also investigated to provide a theoretical basis for the application of the FGPE materials.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1997년도 봄 학술발표회 논문집
• /
• pp.35-42
• /
• 1997

The two-state or mutual M-integral which is derived from tile M-integral and is applicable for two elastic states, is applied for computing all intensity of a singular near-tip field around the vertex of a class of wedge, encountered in adhesive lap joints under mechanical loading. Numerically we verify that a simple auxiliary field associated with every eigenfunction for the composite wedge under consideration exists in the form of the conjugate solution in the sense of tile M-integral. The auxiliary field is then employed for superposition with the elastic field under consideration, and the associated two-state M-integral is computed via the domain integral technique. This enables us to extract the intensity for a singular field information for a singular elastic boundary layer is extracted form the domain integral representation without resort to singular finite element for the wedge vertex.