• Fashion & Textile Research Journal
• /
• v.25 no.3
• /
• pp.324-332
• /
• 2023

Consumers are addressing the issue of dimensional dissatisfaction by repairing clothes, experimenting with style changes, and looking for cost-effective solutions that result in better-fitting garments. This study investigated the repair status by type of clothing, analyzed the method and frequency of repair by type of clothing category and season, and analyzed consumer redesign activities. The findings revealed that upper garments, such as T-shirts, jumpers, jackets, dress shirts, and dresses, were frequently repaired. The common modifications to upper garments included(in order of frequency) shortening sleeve length, shortening overall length, reducing garment width, zipper repair, and adjusting sleeve width. Lower garments, such as pants, jeans, skirts, and training pants, followed in terms of repair frequency. The modifications to lower garments included(in order of frequency) shortening length, reducing width, adjusting waist width (both narrowing and widening), replacing elastic bands, zipper repair, and lengthening. Repairs were more frequently conducted in the order of autumn, winter, spring, and summer. Repair methods varied depending on the clothing type and alterations involved to the length and width of garments and the replacement or removal of old sections. Redesigning clothing as a recycling method was found to enhance the cost-effectiveness of the collection. The study further confirmed the sustainability aspect of redesigning and reusing clothing.

• The korean journal of orthodontics
• /
• v.38 no.3
• /
• pp.159-174
• /
• 2008

Objective: The purpose of this study was to investigate whether cortical punching could stimulate the expression of OPG, RANK, and RANKL during tooth movement by immunohistochemistry. Methods: 34 sprague-dawley rats (15 weeks old) were allocated into 3 groups: TMC group (experimental group; Tooth Movement with Corticotomy, n = 16), TM group (control group; Tooth Movement only group, n = 16), and non-treatment group (n = 2). 20 gm of orthodontic force was applied to rat incisors by inserting elastic bands. The duration of force application was 1, 4, 7 and 14 days. A microscrew (diameter 1.2 mm) was used for cortical punching of the palatal side of the upper incisors in the TMC group. Results: Distributions of OPG, RANK, and RANKL were evaluated by immunohistochemistry. OPG, RANK and RANKL were observed on experimental and control groups. On the compression side, the degree of the expression of OPG decreased in both groups. The expression of RANK was most prominent in the experimental group of day 4. The expression of RANKL was most intensive and extensive in the experimental group of day 7. However, the expression of OPG was decreased in the experimental and control groups compared to the non treatment group. The expression of OPG, RANK and RANKL after force application were decreased at day 14. Conclusions: These findings suggested that cortical punching might stimulate remodeling of alveolar bone during a 2 week period of tooth movement without any pathologic change.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.41 no.1
• /
• pp.72-79
• /
• 2014

Cleft lip and palate(CLP) is one of the most common craniofacial deformities that requires systemic management involving a multidisciplinary team approach. Although there has been great improvement in the field of cleft surgery, surgical approach alone cannot resolve the various problems in treating cleft lip and palate. Hence the need for presurgical treatment was appreciated and especially, the concept of presurgical nasoalveolar molding was applied to treat unilateral and bilateral cleft lip and palate patients. Presurgical nasoalveolar molding(PNAM) of unilateral cleft mainly aims to recover nasal symmetry while the objectives of pre-surgical nasoalveolar molding in the bilateral cleft are to elongate the columella, to erect the tip of nose, and to reposition the forward displaced premaxillary region. This report covers the case of fraternal twins diagnosed with bilateral cleft. Retraction of the premaxillary region and nasoalveolar molding were conducted for 70 days until cheiloplasty, using elastic bands and nasoalveolar molding appliances. After cheiloplasty, there had been improvements in the length of columella and the position of forward-displaced premaxilla for both patients compared to their initial states. The esthetics was also satisfactory for both the surgery and the parents. In order to maximize the efficacy of the appliance, three components should be in balance; patients' adaptation to the appliance, parents' cooperation and proper selection and careful adjustment of the appliance by the dentist.

• Geomechanics and Engineering
• /
• v.15 no.4
• /
• pp.1017-1027
• /
• 2018

To explore the influence of coal thickness on the mechanical behavior and the failure characteristics of rock-coal-rock (RCR) mass, the experimental investigation of uniaxial compressive tests was conducted first and then a systematic numerical simulation by particle flow code (PFC2D) was performed to deeply analyze the failure mechanical behavior of RCR specimens with different coal thicknesses in conventional compression tests. The overall elastic modulus and peak stress of RCR specimens lie between the rock and the coal. Inter-particle properties were calibrated to match the physical sample strength and the stiffness response. Numerical simulation results show that the deformation and strength behaviors of RCR specimens depend not only on the coal thickness, but also on the confining pressure. Under low confining pressures, the overall failure mechanism of RCR specimen is the serious damage of coal section when the coal thickness is smaller than 30 mm, but it is shear failure of coal section when the coal thickness is larger than 30 mm. Whereas under high confining pressures, obvious shear bands exist in both the coal section and the rock section when the coal thickness is larger than 30 mm, but when the coal thickness is smaller than 30mm, the failure mechanism is serious damage of coal section and shear failure of rock section.

• Geophysics and Geophysical Exploration
• /
• v.22 no.4
• /
• pp.177-185
• /
• 2019

Ground roll is a surface wave which is usually observed in the land seismic data. It is one of the typical coherent noise. During the reflection data processing, ground roll is removed because it is considered as noise. This removal process often causes the loss of reflection signals if the ground roll overlaps reflection signals. In this study, we look over Karhunen-Loeve Transform (KLT) and analyze its effects to suppress the ground roll appropriately while reducing the reflection loss. Numerical tests in homogeneous elastic media show that the ground roll has been properly rejected. However, the field data application reveals that there is no significant suppression of ground roll when compared to band-pass filtering. This can be considered that it is hard to calculate horizontally aligned gathers in the field data because the ground roll contains a wide range of frequency bands. On the contrary, the result of singular value decomposition (SVD) filtering shows that the ground roll has been significantly reduced. It is thought that the SVD filtering performs better in the ground roll suppression than KLT because it is easy to calculate the horizontally aligned gathers in the SVD filtering.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.32 no.3
• /
• pp.525-530
• /
• 2005

Maxillary median diastema is the term used when there is spacing between maxillary central incisors. The space between maxillary central incisors are often observed during ugly duckling stage. In most of the cases, as maxillary permanent canines erupt, it gradually disappears. Maxillary median diastema needs to be treated when there is up to 2mm of space between the incisors even after eruption of permanent canines or when there is 3mm of space, at least, before the eruption of the canines. Particulary, for the latter case, orthodontic treatment is recommended because not only the esthetic point of view but also to regain the eruption space for maxillary lateral incisors and canines. The appliance used for orthodontic treatment are removable appliances, using finger spring and etc, and fixed appliances, using rubber elastics and coil spring. If rubber band alone was used to treat median diastema without any other appliance such as band, tube or bracket, it will gradually move downward along the root surface. Then it will destroy the peridontal ligament and causes tooth mobility, extrusion, and avulsion. This report presents cases of damaged tooth due to improper use of rubber band when treating maxillary median diastema.

• Geophysics and Geophysical Exploration
• /
• v.8 no.1
• /
• pp.41-49
• /
• 2005

We have developed a random heterogeneous velocity model with bimodal distribution in methane hydrate-bearing Bones. The P-wave well-log data have a von Karman type autocorrelation function and non-Gaussian distribution. The velocity histogram has two peaks separated by several hundred metres per second. A random heterogeneous medium with bimodal distribution is generated by mapping of a medium with a Gaussian probability distribution, yielded by the normal spectral-based generation method. By using an ellipsoidal autocorrelation function, the random medium also incorporates anisotropy of autocorrelation lengths. A simulated P-wave velocity log reproduces well the features of the field data. This model is applied to two simulations of elastic wane propagation. Synthetic reflection sections with source signals in two different frequency bands imply that the velocity fluctuation of the random model with bimodal distribution causes the frequency dependence of the Bottom Simulating Reflector (BSR) by affecting wave field scattering. A synthetic cross-well section suggests that the strong attenuation observed in field data might be caused by the extrinsic attenuation in scattering. We conclude that random heterogeneity with bimodal distribution is a key issue in modelling hydrate-bearing Bones, and that it can explain the frequency dependence and scattering observed in seismic sections in such areas.

• The Journal of the Convergence on Culture Technology
• /
• v.10 no.3
• /
• pp.533-539
• /
• 2024

This study investigated the effects of two exercise programs, which include exercise methods to increase muscle strength, balance, and endurance, on the balance ability and fall efficacy of elderly people, and the differences in effects according to preference. Twenty-one elderly people were divided into a group using assistive devices using elastic bands (Experimental Group 1) and a group using the body (Experimental Group 2) and an exercise program was conducted for 4 weeks. The single leg stand (SLS) and functional reach test (FRT) were used to evaluate the elderly's balance ability, and the fall efficacy scale (FES) was used to evaluate the degree of fear of falling. A pre-evaluation was conducted after a 2-week integrated exercise program, and a post-evaluation was conducted after applying the exercise program for 4 weeks. In the study results, within-group SLS, FRT, and FES analyzes all showed statistically significant improvement in the post-assessment compared to the pre-assessment. However, there were no significant differences in the comparison between groups regarding exercise program and between groups according to preference. In conclusion, in order to increase the balance ability and fall efficacy of the elderly, an exercise program must be applied, and it is necessary to use a program that is easy to apply and includes exercise methods that the elderly can easily perform.

• Korean Journal of Remote Sensing
• /
• v.39 no.5_1
• /
• pp.669-681
• /
• 2023

Studies have tried to apply remote sensing technology, a non-destructive survey method, instead of the existing destructive survey, which requires relatively large labor input and a long time to estimate chlorophyll content, which is an important indicator for evaluating the growth of fruit trees. This study was conducted to non-destructively evaluate the chlorophyll content of pear tree leaves using unmanned aerial vehicle-based hyperspectral imagery for two years(2021, 2022). The reflectance of the single bands of the pear tree canopy extracted through image processing was band rationed to minimize unstable radiation effects depending on time changes. The estimation (calibration and validation) models were developed using machine learning algorithms of elastic-net, k-nearest neighbors(KNN), and support vector machine with band ratios as input variables. By comparing the performance of estimation models based on full band ratios, key band ratios that are advantageous for reducing computational costs and improving reproducibility were selected. As a result, for all machine learning models, when calibration of coefficient of determination (R²)≥0.67, root mean squared error (RMSE)≤1.22 ㎍/cm², relative error (RE)≤17.9% and validation of R²≥0.56, RMSE≤1.41 ㎍/cm², RE≤20.7% using full band ratios were compared, four key band ratios were selected. There was relatively no significant difference in validation performance between machine learning models. Therefore, the KNN model with the highest calibration performance was used as the standard, and its key band ratios were 710/714, 718/722, 754/758, and 758/762 nm. The performance of calibration showed R²=0.80, RMSE=0.94 ㎍/cm², RE=13.9%, and validation showed R²=0.57, RMSE=1.40 ㎍/cm², RE=20.5%. Although the performance results based on validation were not sufficient to estimate the chlorophyll content of pear tree leaves, it is meaningful that key band ratios were selected as a standard for future research. To improve estimation performance, it is necessary to continuously secure additional datasets and improve the estimation model by reproducing it in actual orchards. In future research, it is necessary to continuously secure additional datasets to improve estimation performance, verify the reliability of the selected key band ratios, and upgrade the estimation model to be reproducible in actual orchards.

• Journal of the Korean Applied Science and Technology
• /
• v.39 no.3
• /
• pp.397-406
• /
• 2022

This study is an experimental study on the single group pre-post test design for the effects of the exercise program combined with telephone coaching on postural balance, grip strength and depression of the elderly living alone. The subjects of this study were 20 elderly living alone who registered at a senior welfare center located in S City, Gyeonggi-do. A total of 12 session programs were applied from July 3 to October 14, 2021. Before and after the program, the participant's home was visited and 4 stage standing balance test(4 SBT), grip strength and depression were measured. The contents of the intervention consisted of elastic bands and grip balls, and weekly telephone coaching interventions were provided. In the result of this study, the exercise program combined with telephone coaching were statistically significant differences in 4 SBT(3stage)(t=-2.37, p=.029), 4 SBT(4stage)(t=-2.46, p=.024), right grip strength(t=-2.18. p=.042) and depression(t=2.82, p<.001). Therefore, it is expected that the exercise program combined with telephone coaching can be applied as a nursing intervention to improve postural balance, grip strength and reduce depression in the elderly living alone in the community.