• Journal of the Korea Society of Computer and Information
• /
• v.26 no.1
• /
• pp.1-9
• /
• 2021

OpenGL compute shader is a shader stage that operate differently from other shader stage and it can be used for the calculating purpose of any data in parallel. This paper proposes a GPU-based parallel algorithm for computing sparse linear systems through conjugate gradient using an iterative method, which perform calculation on OpenGL compute shader. Basically, this sparse linear solver is used to solve large linear systems such as symmetric positive definite matrix. Four well-known matrix formats (Dense, COO, ELL and CSR) have been used for matrix storage. The performance comparison from our experimental tests using eight sparse matrices shows that GPU-based linear solving system much faster than CPU-based linear solving system with the best average computing time 0.64ms in GPU-based and 15.37ms in CPU-based.

• IEIE Transactions on Smart Processing and Computing
• /
• v.4 no.5
• /
• pp.297-304
• /
• 2015

A multilayer gaseous detector has been developed for fast dose-verification measurements of raster-scan-mode therapeutic beams in particle therapy. The detector, which was constructed with eight thin parallel-plate ionization chambers (PPICs) and polymethyl methacrylate (PMMA) absorber plates, is closely tissue-equivalent in a beam's eye view. The gas-electron signals, collected on the strips and pad arrays of each PPIC, were amplified and processed with a continuous charge.integration mode. The detector was tested with 190-MeV raster-scan-mode beams that were provided by the Proton Therapy Facility at Samsung Medical Center, Seoul, South Korea. The detector responses of the PPICs for a 190-MeV raster-scan-mode proton beam agreed well with the dose data, measured using a 2D ionization chamber array (Octavius model, PTW). Furthermore, in this study it was confirmed that the detector simultaneously tracked the doses induced at the PPICs by the fast-oscillating beam, with a scanning speed of 2 m s-1. Thus, it is anticipated that the present detector, composed of thin PPICs and operating in charge.integration mode, will allow medical scientists to perform reliable fast dose-verification measurements for typical dynamic mode therapeutic beams.

• The KIPS Transactions:PartA
• /
• v.15A no.3
• /
• pp.135-140
• /
• 2008

This paper describes a high-speed CMOS demultiplexer using redundant multi-valued logic (RMVL). The proposed circuit receives serial binary data and is converted to parallel redundant multi-valued data using RMVL. The converted data are reconverted to parallel binary data. By the redundant multi-valued data conversion, the RMVL makes it possible to achieve higher operating speeds than that of a conventional binary logic. The implemented demultiplexer consists of eight integrators. Each integrator is composed of an accumulator, a window comparator, a decoder and a D flip flop. The demultiplexer is designed with TSMC $0.18{\mu}m$ standard CMOS process. The validity and effectiveness are verified through the HSPICE simulation. The demultiplexer is achieved the maximum data rate of 20 Gb/s and the average power consumption of 95.85 mW.

• Journal of Institute of Control, Robotics and Systems
• /
• v.20 no.11
• /
• pp.1147-1152
• /
• 2014

This paper describes the design of a four-axis force/torque sensor with PSPBs (Parallel Step Plate Beams). The sensor is composed of eight PSPBs, a force/torque transmitting block, and fixing blocks. It is designed by using the FEM(Finite Element Method), and fabricated by using strain gages. The characteristic tests of the sensor are carried out, and the interference error, repeatability error, and non-linearity error are less than 2.21%, 0.03% and 0.03%. Furthermore, the structure of the four-axis force/torque sensor with PSPBs has a larger rated capacity than that of the four-axis force/torque sensor with PPBs under the same overall sensor size and the same rated output. It is thought that the developed four-axis force/torque sensor with PSPBs can be used for measuring the forces and torques in an intelligent robot, automation devices, etc.

• Journal of IKEEE
• /
• v.16 no.4
• /
• pp.382-388
• /
• 2012

An H.264/AVC fast motion estimation methodology is presented in this paper. Advanced SIMD based NEON which is one of the parallel processing methods is supported under the ARM Cortex-A9 dual-core platform. NEON is applied to a full search technique with one of the various motion estimation methods and SAD operation count of each macroblock is reduced to 1/4. Pixel values of the corresponding macroblock are assigned to eight 16-bit NEON registers and Intrinsic function in NEON architecture carried out 128 bits arithmetic operations at the same time. In this way, the exact motion vector with the minimum SAD value among the calculated SAD values can be designated. Experimental results show that performance gets improved 30% above average in accordance with the size of image and macroblock.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.4
• /
• pp.838-845
• /
• 2004

After collecting the scanned images of practical identification licenses, it is attained to more accurate recognition of numbers in the identification licenses. As considering the process speed of the preprocess course for recognition, first, it is divided into eight equal parts of the identification license and then, removed the hologram of correspondent noises. It is run parallel template comparison method and teaming method for the number recognition and in order to extract a simple characteristics of the number the clustering method is used. Also, in case of misrecognized number because of external environment by run parallel with the thinning method, similar each numbers is sectioned by unique characteristics. From the results of number recognition, it is confirmed that the recognition rate of numbers is superior to other Studies.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.26 no.2
• /
• pp.28-39
• /
• 2022

An experimental study was carried out to understand the characteristics of the long wave infrared signal emitted from the exhaust plume when water is sprayed around it. The micro-jet engine was used to generate the exhaust plume, and eight water spray nozzles were installed around the exhaust nozzle. Two water injection angles were applied, one is sparying parallel to the exhaust plume, and the other is spraying water into the exhaust plume. The measurement results are as follows. When spraying water parallel to the exhaust plume, the long wave infrared signal is decreased with water spray flow rate. When spraying water the exhaust plume, the long wave infrared signal shows a larger value than plume only.

• Structural Engineering and Mechanics
• /
• v.32 no.5
• /
• pp.635-648
• /
• 2009

This paper describes fire performance of eight axially restrained reinforced concrete (RC) columns under a combination of two different load ratios and two different axial restraint ratios. The eight RC columns were all concentrically loaded and subjected to ISO834 standard fire on all sides. Axial restraints were imposed at the top of the columns to simulate the restraining effect of the rest of the whole frame. The axial restraint was effective when the column was expanding as well as contracting. As the results of the experiments have shown, the stiffness of the axial restraint and load level play an important role in the fire behaviors of both HSC and NSC columns. It is found that (a) the maximum deformations during expanding phase were influenced mostly by load ratio and hardly by axial restraint ratio, (b) For a given load ratio, axial restraint ratio had a great impact on the development of axial deformation during contraction phase beyond the initial equilibrium state, (c) increasing the axial restraint increased the value of restraint force generated in both the NSC and HSC columns, and (d) the development of column axial force during the contracting and cooling phase followed nearly parallel trend for columns under the same load ratio.

• Korean Journal of Animal Reproduction
• /
• v.11 no.1
• /
• pp.33-41
• /
• 1987

The cycle of the seminiferous epthelia in the testis of matured Korean Native Cattle was divided into eight stages. The results were summarized as follows: 1. Type A spermatogonia a, pp.ared twice as many at stage 2 as compared to stage 1, while maximum numbers were the average of 2.8 at stage 2. The intermediate and Type B spermatogonia were found during the stage 3 to 8, stage 6 to 8, respectively. The leptolene primary spermatocytes were not observed during the stage 5 to 7, while the pachytene primary spermatocytes were shown the least in number at stage 4, the secondary supermatocytes could be seen only at stage 4 and the round spermatids were not observed at stage 3, 4. 2. The relative frequencies of the eight stages of the cycle of the seminiferous eptithelia were 24.9, 14.2, 19.0, 6.3, 3.7, 7.9, 10.3 and 13.9%, respectively. 3. Some of the nuclei of Sertoli cells transformed from the "parallel" type to the "perpendicular" type. This evolution took place from stage 1 to 5, when the number of "perpendicular" type nuclei reached a peak and the number was decreased in the rest of the stages.sed in the rest of the stages.

• Journal of Plant Biology
• /
• v.13 no.3
• /
• pp.25-31
• /
• 1970

The ratio of occurrence of azalea (Rhododendron mucromultum T.) was determined on the north and south facing slopes on a mountain in Koyang county, Kyungi Province. Data was actually recorded at the eight aspects facing N, NE, E, SE, S, SW, W and NW on the mountain. In each of the eight aspects, six 10m transect tapes were placed in parallel directly down the slope, each 1m apart, and fifty 1$m^2$ quadrats were constructed between them. Frequency of the azalea in each of these quadrats was determined by counting the central stumps of the bushes Soil samples were also taken from pits dug in each plot to use for determination of the following: Soil pH, soil moisture loss on ignition, total nitrogen, and available phosphorus. The occurrence rate of azalea on the northern slop e was found to be for higher on the northern slope than on the southern slope. The abundance of azalea on the northern slope was found to be partially correlated with soil moisture(r=0.93; 0.01>p) and the amount of humus in the soil (r=0.04;0.01>p). The content of total nitrogen, soil PH, and available phosphorus in the soil, however, were found to have no evident relationship with the abundance of azalea. The conditions for growth in the species of azalea Rhododendron mucronulatum T'. were generally found to be more favorable on the northern slope.