Browse > Article
http://dx.doi.org/10.5302/J.ICROS.2014.14.0082

Design of Structure of Four-Axis Force/Torque Sensor with Parallel Step Plate Beams  

Lee, Kyung-Jun (Department of Control and Instrumentation Engineering, Gyeongsang National University)
Kim, Gab-Soon (Department of Control and Instrumentation Engineering, Gyeongsang National University)
Publication Information
Journal of Institute of Control, Robotics and Systems / v.20, no.11, 2014 , pp. 1147-1152 More about this Journal
Abstract
This paper describes the design of a four-axis force/torque sensor with PSPBs (Parallel Step Plate Beams). The sensor is composed of eight PSPBs, a force/torque transmitting block, and fixing blocks. It is designed by using the FEM(Finite Element Method), and fabricated by using strain gages. The characteristic tests of the sensor are carried out, and the interference error, repeatability error, and non-linearity error are less than 2.21%, 0.03% and 0.03%. Furthermore, the structure of the four-axis force/torque sensor with PSPBs has a larger rated capacity than that of the four-axis force/torque sensor with PPBs under the same overall sensor size and the same rated output. It is thought that the developed four-axis force/torque sensor with PSPBs can be used for measuring the forces and torques in an intelligent robot, automation devices, etc.
Keywords
four-axis force/torque sensor; rated output; interference error; step plate beam;
Citations & Related Records
연도 인용수 순위
  • Reference
1 C. G. Kang, "Performance improvement of a 6-axis force-torque sensor via novel electronics and cross-shaped double-hole structure," International Journal of Control, Automation, and Systems, vol. 3, no. 3, pp. 469-476, Sep. 2005.
2 B. Wu and P. Cai, "Decoupling analysis of a sliding structure six-axis force/torque sensor," Measurement Science Review, vol. 13, no. 4, 2013.
3 D. I. Kang, G. S. Kim, S. Y. Jeoung, and J. W. Joo, "Design and evaluation of binocular type six-component load cell by using experimental technique," Trans. Korean Society of Mechanical Engineers, vol. 21, pp. 1921-1930, 1997.
4 D. Diddens, D. Reynaerts, and H. V. Brussel, "Design of a ring-shaped three-axis micro force/torque sensor," Sensors and Actuators A: Physical, vol. 46, no. 1-3, pp. 225-232, 1995.   DOI
5 K. Nagai, Y. Ito, M. Yazaki, K. Higuchi, and S. Abe, "Development of a small six-component force/torque sensor based on the double-cross structure," Journal of the Robotics Society of Japan, vol. 22, no. 3, pp. 361-369, 2004.   DOI
6 A. Song, J. Wu, G. Qin, and W. Huang, "A novel self-decoupled four degree-of-freedom wrist force/torque sensor," Measurement, vol. 40, no. 9-10, pp. 883-891, 2007.   DOI
7 H. M. Kim, J. W. Yoon, and G. S. Kim, "Development of a six-axis force/moment sensor for a spherical-type finger force measuring system," IET Science, Measurement and Technology, vol. 6, no. 2, pp. 96-104, 2012.   DOI
8 G. S. Kim, "Development of a six-axis force/moment sensor with rectangular taper beams for an intelligent robot," International Journal of Control, Automation, and Systems, vol. 5, no. 4, pp. 419-428, 2007.
9 J. J. Park and G. S. Kim, "Development of the 6-axis force/moment sensor for an intelligent robot's gripper," Sensors and Actuators A, vol. 118, pp. 127-134, 2005.   DOI
10 S. Liu and H. L. Tzo, "A novel six-component force sensor of good measurement isotropy and sensitivities," Sensors and Actuators A: Physical, vol. 100, no. 2-3, pp. 223-230, 2002.   DOI
11 G. S. Kim, H. J. Shin, and J. W. Yoon, "Development of 6-axis force/moment sensor for a humanoid robot's intelligent robot," Sensors and Actuators A, vol. 141, no. 2, pp. 276-281, 2008.   DOI   ScienceOn
12 ATI Industrial Automation, "Multi-axis forcre/torque sensor," ATI Industrial Automation, pp. 4-45, 2005.
13 G. S. Kim and J. W. Yoon, "Development of calibration system for multi-axis force/moment sensor and its uncertainty evaluation," Korean Society Precision Engineering, vol. 24, no. 10, pp. 91-98, 2007.