• Journal of Korea Spatial Information System Society
• /
• v.12 no.1
• /
• pp.1-9
• /
• 2010

Recently, wireless sensor networks(WSNs) technology has been considered as one of the most critical issues in the ubiquitous computing age. The sensor nodes have limited battery power, so they should consume low energy through their operation for the long-lasting lifetime. Therefore, it is essential to use energy efficient routing protocol. For this, we propose a location-based energy-efficient routing protocol which constructs the energy efficient route by considering the quantity of Energy consumed. In addition, we propose a route reconstruction algorithm to handle the disconnection of message transmission. Finally, we show from performance analysis using TOSSIM that our protocol outperforms the existing location based routing protocols in terms of energy efficiency.

• Journal of KIISE:Computing Practices and Letters
• /
• v.16 no.12
• /
• pp.1194-1198
• /
• 2010

Recent mobile devices have multiple wireless network interfaces. Therefore, we can use a more 'energy efficient network interface for reducing energy consumption' according to the network environment without depending on a specific network interface. In this paper, we propose an energy efficient wireless network interface selection scheme for mobile devices with multiple wireless network interfaces. The proposed scheme selects a more energy efficient network interface for data communication by using polling. Also, we show that our scheme is more efficient in terms of energy consumption.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.1
• /
• pp.197-203
• /
• 2010

The problem of location awareness in wireless sensor networks where nodes use GPS (Global Positioning System), remains challenging problem, when considering the required large energy consumption during the localization phase. In this paper we designed hardware for GPS based localization and propose a framework, called ELS, to consume low cost energy. In the ELS framework, sensor nodes are equipped with GPS. Because GPS spends large energy for position awareness, conventional localization algorithms cannot use GPS-device. We try to find a solution for efficient energy expenditure of GPS. Finally, we derive optimal transmission power of GPS data and a scheme of localization through experiment and simulation.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.13 no.6
• /
• pp.455-461
• /
• 2001

Domestic ice making companies make effort to obtain products and neglect to introduce low cost product improvements with energy savings. The work presented here is an implementation of ice making method to improve both energy efficiency and productivity. In this present investigation, several ice making cycles are proposed for higher efficiency in the system. COP(Coefficient of Performance), ice making time and electric energy consumption are evaluated and compared with the conventional system. Results shows that COP is improved with more efficient use of time for ice making and electric consumption. Therefore, this can offer an opportunity for more efficient use of energy and higher productivity in ice making.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.48 no.8
• /
• pp.941-950
• /
• 1999

This paper presents a DSM monitoring methodology that is able to evaluate the impact of DSM programs especially focused on the strategic conservation i.e. the enhancement of end-use energy efficiency. For an effective assessment of DSM programs, it is foremost necessary to examine the market characteristics on the specific end-use appliance according to the customer's adoption of DSM programs. The proposed monitoring methodology contains a diffusion process of high efficient end-uses considering major factors of DSM impact such as, price, reference capacity, forecasted capacity and lifetime of end-use appliances. Case studies show the projection of power reductions and energy savings resulted from DSM monitoring in order to diagnose the current status properly and provide a baseline of DSM policy and analysis.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.11 no.3
• /
• pp.79-90
• /
• 2015

Multipath routing technique is recognized as one of the effective approaches to improve the reliability of data forwarding. However, the traditional multipath routing focuses only on how many paths are needed to ensure a desired reliability. For this purpose, the protocols construct additional paths and thus cause significant energy consumption. These problems have motivated the study for the energy-efficient and reliable data forwarding. Thus, this paper proposes an energy-efficient concurrent multipath routing protocol with a small number of paths based on interaction between paths. The interaction between paths helps to reinforce the multipath reliability by making efficient use of resources. The protocol selects several nodes located in the radio overlapped area between a pair of paths as bridge nodes for the path-interaction. In order to operate the bridge node efficiently, when the transmission failure has detected by overhearing at each path, it performs recovery transmission to recover the path failure. Simulation results show that proposed protocol is superior to the existing multipath protocols in terms of energy consumption and delivery reliability.

• Journal of the Korean Solar Energy Society
• /
• v.34 no.5
• /
• pp.109-115
• /
• 2014

The supply rate of renewable energy has been increasing under the influence of an energy scarcity. Government has supported the use of renewable energy by government subsidies. The operation of renewable may not been operating appropriately, although increasing the use of renewable energy. We found out some problems of the operation of renewable energy and offered some improvements. This research proposes the efficient operation method for the solar thermal system, and proposed operation method was compared and evaluated with existing operation strategy after selecting one building installed solar thermal system. Recently, the interest to renewable energy has increased because of the environmental issues and energy crisis. However the utilization of the renewable energy system is low because of the use of renewable energy system and existing renewable energy system independently, although supply rate of renewable system is increasing. Especially, in the case of solar thermal system heating load is not responsible for the load of hot water supply in many cases. Therefore, suggesting efficient operation plans and evaluations of the energy consumption and efficiency of a solar thermal system is needed.

• Journal of Sensor Science and Technology
• /
• v.32 no.4
• /
• pp.213-218
• /
• 2023

Triboelectric nanogenerators (TENGs) have emerged as a highly promising energy harvesting technology capable of harnessing mechanical energy from various environmental vibrations. Their versatility in material selection and efficient conversion of mechanical energy into electric energy make them particularly attractive. TENGs can serve as a valuable technology for self-powered sensor operation in preparation for the IoT era. Additionally, they demonstrate potential for diverse applications, including energy sources for implanted medical devices (IMDs), neural therapy, and wound healing. In this review, we summarize the potential use of this universally applicable triboelectric energy harvesting technology in the disinfection and blocking of pathogens. By integrating triboelectric energy harvesting technology into human clothing, masks, and other accessories, we propose the possibility of blocking pathogens, along with technologies for removing airborne or waterborne infectious agents. Through this, we suggest that triboelectric energy harvesting technology could be an efficient alternative to existing pathogen removal technologies in the future.

• 한국정보통신설비학회:학술대회논문집
• /
• 2009.08a
• /
• pp.349-352
• /
• 2009

WBAN/USN systems are applied from the various environment. Therefore, it is coming to be important efficient use power and communication method. The present paper materialize Slave node system which get power from light energy. Also, it materialize Wake-up module and self-power-off circuit which use S-R Flip Flop for efficient using power. This system can be efficient using power at Slave node system. Also, it can be possible application of Self sustaining system by performance verification Wake-up module which determine system "on" without power and Self-power-off circuit.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.58 no.3
• /
• pp.235-240
• /
• 2009

In automobile, the introduction of electronically commutated motors has been accompanied by a proliferation of electronic devices. With this proliferation of electronic devices, an emphasis has been placed on EMC issues. This paper is proposed to use SRM as a radiator cooling fan in automotive applications. To drive SRM, Energy efficient C-dump converter is applied. Energy efficient C-dump converter, derived from the conventional C-dump converter, is proposed as a switched reluctance motor (SRM) drive for automotive engine cooling application. It is verified more efficient than other converters through simulation and experiments. And also SRM is valid for automotive applications that have strict EMC standards. Simulation and experimental results obtained on a laboratory prototype are finally presented to evaluate the performance.