• 한국전기전자재료학회논문지
• /
• 제22권4호
• /
• pp.327-332
• /
• 2009

In the devices structure of ITO/N,N'-diphenyl-N,N' bis (3-methylphenyl)-1,1'-biphenyl-4,4'-diamine (TPD) /tris (8-hydroxyquinoline)aluminum$(Alq_3)$electron-transport-layer(ETL)(2,9-Dimethyl-4,7-diphenyl-1,10-phenanthroline(BCP))/Al, we have studied the efficiency improvement of organic light-emitting diodes depending on the thickness variation of BCP using electron transport layer. The thickness of TPD and $Alq_3$ was manufactured 40 nm, 60 nm under a base pressure of $5{\times}10^{-6}$ Torr using at thermal evaporation, respectively. The TPD and $Alq_3$ layer were evaporated to be deposition rate of $2.5{\AA}/s$. And the BCP was evaporated to be a4 a deposition of $1.0{\AA}/s$. As the experimental results, we found that the luminous efficiency and the external quantum efficiency of the device is superior to others when thickness of BCP is 5 nm. Also, operating voltage is lowest. Compared to the ones from the devices without BCP layer, the luminous efficiency and the external quantum efficiency were improved by a factor of four hundred ninty and five hundred, respectively. And operating voltage is reduced to about 2 V.

• 한국식품영양학회지
• /
• 제22권1호
• /
• pp.132-140
• /
• 2009

This study was performed to examine the manpower structure of foodservice operations, evaluate the management efficiency of each operation, and propose efficiency improvement guidelines for inefficient operations. For this purpose, a total of 224 B&I foodservice operations managed by an 'A' contract-managed foodservice company were chosen as the study sample. The efficiency scores were obtained through Data Envelopment Analysis(DEA) using the CCR model. The efficiency scores ranged from 63.56 to 100 and the average score was 82.47. The average efficiency score of Group 'C'(factory, more than 1,000 meals per day) was the highest among 6 groups. The results of further operations analysis in group 'C' showed that the labor cost percentage was significantly lower(p<0.001) and sales per man-hour significantly higher(p<0.001) in efficient operations compared to inefficient operations within group 'C'. Finally, efficiency improvement guidelines were suggested for the most inefficient operations in group 'C'.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집D
• /
• pp.721-725
• /
• 2001

The main reason for applying pulverizer classifier-rotary type in fossil power plant is boiler high efficiency and energy saving movement in the government. This study intends to analyze the boiler efficiency through the pulverizer classifier-rotary type improvement in thermal power plant and makes its comparison to that of the used fixed type.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집D
• /
• pp.715-720
• /
• 2001

The main reason for applying positive pressure variable clearance packing in fossil power plant is high efficiency and energy saving movement in the government. This study intends to analyze the turbine efficiency through the shaft packing improvement in thermal power plant and makes its comparison to that of the used packing.

• 대한치과의료관리학회지
• /
• 제9권1호
• /
• pp.38-43
• /
• 2021

Based on data from the Korean Academy for Dental Administration, which has been conducting the Dental Quality Improvement (QI) Contest since 2010, we aimed to provide basic data for the development of dental quality improvement indicators by analyzing the trends of dental quality improvement activities. A total of 54 articles in the dental QI contest from 2015 to 2021 were used to search for frequently used words and to classify the quality of dental care. The criteria for the quality dimension of dental care were first classified into structure, process, and outcome, and secondary classification was performed into patient safety, timeliness, patient-centeredness, equity, efficiency, effectiveness, and accessibility. The frequently used key terms were satisfaction (five times), efficiency (four times), system (three times), and implant (three times). The activities for process evaluation were high at 62.26%, structural evaluation activities at 35.85%, and outcome evaluation activities at 1.89%. According to the components of dental care quality improvement, the activity performed under efficiency was the highest (33.96%), followed by patient-centeredness (18.87%), effectiveness (16.98%), patient safety (15.09%), accessibility (5.66%), timeliness (1.89%), and the equity (1.89%). QI activities in dental hospitals were mainly activities on improvement in structure and process, as well as activities on efficiency, patient-centeredness, effectiveness, and patient safety.

• Journal of Advanced Marine Engineering and Technology
• /
• 제36권4호
• /
• pp.476-483
• /
• 2012

본 논문에서는 선외기에 적용되는 5HP급 전동 추진시스템의 효율 개선 방안에 대해 고찰하였다. 추진시스템의 핵심 부품인 전동기 및 프로펠러의 최적 효율 개선 모델을 제안하고 시제품 제작을 통하여 개선 모델의 특성을 검증하였다. 또한 실장착 시험을 통해 기존 추진시스템 대비 20% 이상의 효율 개선효과를 입증하였다.

• 설비공학논문집
• /
• 제9권3호
• /
• pp.323-332
• /
• 1997

It was reported by some researchers that two-stage parallel-plate ESPs, commonly called electronic air cleaners, show decreasing behavior of collection efficiency as particle size decreases below about $0.03{\mu}m$. This phenomenon is attributed to partial particle charging characteristics, where some of incoming particles are not charged in the charging cell of 2-stage parallel-plate ESP. One way to improve the decreasing collection efficieny in that particle size range is to enforce particle charging quantity in the charging cell. In the present study, in order to do this a 2-wire series-type charging cell modified from a 1-wire normal-type one was suggested and investigated theoretically and experimentally concerning improvement of the collection efficiency. It was confirmed from the experimental and theoretical works that the collection efficiency was apparently improved.

• 전기학회논문지
• /
• 제57권9호
• /
• pp.1536-1545
• /
• 2008

In this paper, we research a new method for efficiency improvement of a single-phase Induction motor by minimization of the stator loss. To make this, we perform winding design which is based on balanced and quasi-balanced operation condition. It gives efficiency improvement greatly but poor starting torque simultaneously. To obtain the best efficiency improvement maintaining the maximum and starting torque, the optimal winding specification and rotor dimension is determined with variation of secondary resistance, running capacitor and turn ratio. Finally, this paper gives the comparison between the simulation results and experimental results.

• Journal of Power Electronics
• /
• 제12권2호
• /
• pp.305-316
• /
• 2012

The paper presents an accurate loss model based controller of an induction motor to calculate the optimal air gap flux. The model includes copper losses, iron losses, harmonic losses, friction and windage losses, and stray losses. These losses are represented as a function of the air gap flux. By using the calculated optimal air gap flux compared with rated flux for speed sensorless indirect vector controlled induction motor, an improvement in motor efficiency is achieved. The motor speed performance is improved using a fuzzy logic speed controller instead of a PI controller. The fuzzy logic speed controller was simulated using the fuzzy control interface block of MATLAB/SIMULINK program. The control algorithm is experimentally tested within a PC under RTAI-Linux. The simulation and experimental results show the improvement in motor efficiency and speed performance.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 B
• /
• pp.777-778
• /
• 2006

This paper deals with the optimum rotor design approach about the multi-layer design of the buried magnets in an Interior Permanent Magnet Synchronous Motor (IPMSM), on the efficiency improvement by using Response Surface Methodology (RSM). In the multi-layer design of the prototype 15kw IPMSM, the constant amount of buried PM is split from the single-layer into double-layer design for improving the efficiency characteristics. The optimum double-layer rotor structure is built with the help of RSM analysis. The improvement of IPMSM efficiency is verified by the Finite Element Method (FEM) results comparison with the prototype single-layer IPMSM.