• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 하계학술대회 논문집 Vol.7
• /
• pp.28-29
• /
• 2006

When photovoltaic module is used for a long time, its performance decreases due to several reasons. In this paper, we focus on the possibilities mainly contributing to the degraded efficiency of the polycrystalline silicon photovoltaic modules. The analysis is based on the modules that have been used for 15 years. These are two main reasons that cause the efficiency degradation, the corrosion and thermal decomposition. The former phenomenon of electrode is mainly due to the moisture from damaged back sheet in some module. However the other reason of the degraded efficiency comes from the thermal decomposition, which can not be observed from the outside but only by experiment. In this study, the comparison between the efficiency of normal modules and degradation modules is presented. Module having degraded cell was seen to cause increase of series resistance by about 80%, in comparison to normal samples efficiency which reduce by about 20%. This study shows that the effects of series resistances on module performance are critical. These effects must be understood and taken into consideration when analyzing performance degradation.

• 복식문화연구
• /
• 제18권1호
• /
• pp.13-28
• /
• 2010

This study is focused on the elucidation of efficient and correct marking methods by comparing and analyzing marker efficiency depending on the marking job condition such as interval of checking-pattern and marker orientation using woman's Jacket and Slacks. Research Method intended to compare the marking efficiency of Jacket and Slacks, check-less and check- patterned materials with the intervals of $1.5{\times}1.5cm$ and $5{\times}5cm$ were selected. First, in the comparison of marking efficiency depending on check-pattern interval, regardless of the direction of marker position, single-item makers and set-item makers, the efficiency of check-less materials was higher than those of check-patterned materials and increasing the intervals decreased marking efficiency and vice versa. Marking efficiency of Slacks was less influenced than marking efficiency of Jacket by check-pattern interval. Second, in the comparison of marking efficiency depending on the direction of marker position, regardless of check-pattern interval and number of maker pieces, the efficiency of nap-up-and-down position was higher than those of nap-one-way position. Third, the marking efficiency of single-item was more effective than one of set-item in all working condition except nap-one-way position in checkless materials.

• 수산해양기술연구
• /
• 제48권4호
• /
• pp.322-336
• /
• 2012

To study the catching efficiency of biodegradable trammel net for swimming crab (Portunus trituberculatus), three types (biodegradable, monofilament and multifilament) of trammel nets were used in the field test, and the tests were carried out 16 times with two different mesh sizes (105mm and 160mm) in the Yeonpyeong fishing ground of Korea, 2009~2011. The catching efficiency of three type nets was analyzed by catch in number, catch in weight and average weight per individual of small and large size swimming crab by net types and mesh sizes. Statistical T-test was also carried out to verify the efficiency between the three types of nets. The results are as follows. The catch in number of swimming crab was 24,667 and formed about 81.0% of total catch. Of all swimming crab catch, small swimming crabs with less than 64mm in carapace length which is a prohibited landing size by law formed 48.1%, larger swimming crabs with more than 64mm in carapace length which is a landing size formed 51.9%. In 105mm mesh size trammel net test, the catch share in number of small size swimming crab by biodegradable trammel net was 47.5% in comparison with multifilament trammel net and 74.2% in comparison with monofilament trammel net, so biodegradable trammel net has more protective effects on small size swimming crab than other types of trammel nets. The protective effects for small size swimming crab by biodegradable trammel net was 25.8~52.5% in comparison with other types of trammel nets. The catch share in weight of large size swimming crab by biodegradable trammel net was 98.3% in comparison with multifilament trammel net and 92.3% in comparison with monofilament trammel net, so biodegradable trammel net has a similar catch efficiency to multifilament trammel net. The results of 160mm mesh size trammel net test have shown similar results of 105mm mesh size trammel net test. This study shows that biodegradable trammel net is a more useful fishing gear than multifilament and monofilament trammel net because biodegradable trammel net has lower catch rate than other types of nets in small size swimming crab and similar catch rate than multifilament trammel net which is a well used net by fishermen.

• 한국태양에너지학회 논문집
• /
• 제34권4호
• /
• pp.51-56
• /
• 2014

In this paper, OTEC(Ocean Thermal Energy Conversion) system with vapor-vapor ejector is newly proposed. And 6 wet refrigerants are applied into the proposed OTEC system for performance comparison. The results of comparison performance are as follows. In the view of system efficiency, R32/R744(90:10) has the highest efficiency among the 6 refrigerants. In case of evaporation capacity, pump work and mass flow rate of working fluid, R744, R717 and R717 is lowest value, respectively. As this results, the vapor-vapor ejector is able to increase the efficiency of system. And It is necessary to select the optimized working fluid considering environmental and economic factors.

• 한국항만경제학회지
• /
• 제32권3호
• /
• pp.1-20
• /
• 2016

본 연구는 세계 20위권 컨테이너항만 중에서 한국과 중국 항만들의 개별 컨테이너터미널을 단위로 SE-DEA와 Malmquist 생산성지수법으로 2012년-2015년 사이의 효율성 및 생산성 변화추이를 분석하고자 하였다. 기존연구들에 비해 본 연구에서는 연구대상의 범위를 항만 내 터미널로 좁혀 더욱 세부적인 분석을 진행하여 실제 운영에 더욱 의미 있는 시사점을 제시하고자 하였다. SE-DEA 분석결과, 기존 연구와 달리 부산항 신항 주요 터미널은 중국 못지않은 효율성 및 생산성을 나타내고 있음을 밝혔다. 또한, Malmquist 생산성지수법 분석결과, 한국터미널의 평균 MPI지수는 1.051로 생산성이 연간 5.1% 향상되었고, 중국 터미널의 평균 MPI지수는 1.049로 생산성이 연간 4.9% 향상되었다. 2012년-2015년 한 중 양국 터미널의 평균 TCI지수는 각각 1.032와 1.0318로 MPI지수 변화에 중요한 요소로 작용하였다. 즉 생산성 제고는 운영효율성 개선보다 장비투입이나 기술개진을 통해 실현하였음을 설명한다. 미래에 경영의사결정을 함에 있어서 적극적인 시장개척을 통한 물량확보 증가와 운영효율성 제고를 통해 생산성을 개선하여야 한다. 향후 연구에서는 방법론의 다양화와 터미널 재무능력, 서비스 수준 등을 고려한 종합적인 효율성 분석이 필요할 것이다.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2011년도 학술발표회
• /
• pp.19-19
• /
• 2011

The appraisals of hydrology model behavior for flow and water quality are generally performed through comparison of simulated data with observed ones. To perform appraisal of hydrology model, some criteria are often used, such as coefficient of determination ($R^2$), Nash and Sutcliffe model efficiency coefficient (NSE), index of agreement (d), modified forms of NSE and d, and relative efficiency criteria NSE and d. These criteria are used not only for hydrology model estimations also for various comparisons of two data sets; This NSE has been often used for SWAT calibration. However, it has been known that the NSE value has some limitations in evaluating hydrology at watersheds under monsoon climate because this statistic is largely affected by higher values in the data set. To overcome these limitations, the SWAT auto-calibration module was enhanced with K-means clustering and direct runoff/baseflow modules. However the NSE is still being used in this module to evaluate model performance. Therefore, the SWAT Auto-calibration module was modified to incorporate alternative efficiency criteria into the SWAT K-means/direct runoff-baseflow auto-calibration module. It is expected that this enhanced SWAT auto-calibration module will provide better calibration capability of SWAT model for all flow regime.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2015년도 전력전자학술대회 논문집
• /
• pp.357-358
• /
• 2015

This paper provides a comparison of power converter loss and thermal description for voltage source and current source type 5MW-class medium voltage topologies of wind turbines. Neutral-point clamped three-level converter is adopted for voltage source type topology while two-level converter is employed for current source type topology considering the popularity in the industry. In order to match the required voltage level of 4160V with the same switching device of IGCT as in voltage source converter, two active switches are connected in series for the case of current source converter. The loss analysis is confirmed through PLECS simulations. In addition, the loss factors due to di/dt and dv/dt snubber and ac input filter are presented. The comparison result shows that VSC-based wind turbine system has a higher efficiency than that of CSC under the rated operating conditions.

• International Journal of Quality Innovation
• /
• 제7권1호
• /
• pp.90-97
• /
• 2006

The process of producing software differs in many aspects from that of traditional manufacturing. Software is not manufactured in the classical sense. Development of software more closely resembles the development effort that goes into design new product [1-3]. In this article, we first describe the foundations of process improvement, which all processes can share. The process improvement differences between software and manufacturing process are then discussed, and a defect driven process inspection and improvement is introduced. Based on the discussion, two experiments were designed and the results of the results were collected. Through the comparison, we found that some efficient quality improvement approaches can be easily adapted in the software improvement and that the inspection efficiency is also significant.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집D
• /
• pp.721-725
• /
• 2001

The main reason for applying pulverizer classifier-rotary type in fossil power plant is boiler high efficiency and energy saving movement in the government. This study intends to analyze the boiler efficiency through the pulverizer classifier-rotary type improvement in thermal power plant and makes its comparison to that of the used fixed type.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집D
• /
• pp.715-720
• /
• 2001

The main reason for applying positive pressure variable clearance packing in fossil power plant is high efficiency and energy saving movement in the government. This study intends to analyze the turbine efficiency through the shaft packing improvement in thermal power plant and makes its comparison to that of the used packing.