• KIEAE Journal
• /
• 제15권5호
• /
• pp.75-82
• /
• 2015

Purpose: The first grade of Korea's Building Energy Efficiency Rating System(BEERS) is required for new government office buildings as a mandatory measure to reduce greenhouse gas emission. However, there is no specific criteria about performance that which level should apply to energy-saving design element for obtaining Building Energy Efficiency Rating 1st grade. Therefore, Certification status should be analyzed firstly, about the office building which is certificated. Certification analysis for office buildings acquired certification therefore should be done first. Method: In this study, Certification status(Office buildings acquired Building Energy Efficiency Rating Certification)was analyzed by classified year, region, specific scale etc. And we analyzed statistically by eliciting an average value of each element influencing to the amount of energy. Result: Energy demands were gradually decreased due to revision of thermal insulation standards for enhanced u-value. Energy consumptions were different from the kind of equipment and yearly trends applied depending on the size of the building. Total primary energy consumptions were influenced by heat source types and the primary energy scale factors.

• 한국환경보건학회지
• /
• 제27권2호
• /
• pp.30-36
• /
• 2001

This review begins with a brief expression of aerosol capture mechanism of fibrous filter(s) and performance of particulate removing respirators. The more complicated and detailed discussion is not included in this articles. Filtration efficiency and pressure drop are introduced as quality factor ( $q_{F}$) and the way in which filtration efficiency varies with particle size is discussed. Quality factors fro filters recently certified in USA were found to be very higher than those of filters made in Korea, China and USA filters certified with old certified standards. Electrically charged filters are widely used because they have high filtration efficiency and low pressure drop, but their efficiency decreases sharply at the condition occurring wet and oil mist. A discussion is given of respirator leakage through face seal and filter media with fit testing and total inward leakage testing. Since fit factor (FF) refers to the reciprocal of the fraction of the total air entering a respirator through face seal leakage , the degree of fitting performance for respirators is expected with FF. Because respirators made in Korea had generally lower FFs than respirators made in USA, it is necessary to develope respirators that fit properly for Koreans or establish regulations for fit testing.g.

• Applied Science and Convergence Technology
• /
• 제24권4호
• /
• pp.90-95
• /
• 2015

The adsorption behavior of tris (dimethylamino)-cyclopentadienyl-zirconium (Cp-Zr) precursor using an in-situ attenuated total reflectance-Fourier transform infrared spectroscopy (ATR-FT-IR) was studied. In attempt to improve the detection intensity of an adsorbed precursor, nanoparticles were uniformly distributed on the Ge ATR crystal surface employing the spray method. The absorption characteristics studies were carried out over the Ge crystal temperature in the range of $30{\sim}50^{\circ}C$. Upon increasing the temperature, a reduction of absorption was observed. Based on the peak intensities of ATR-FT-IR spectroscopy, higher-$ZrO_2$ absorption efficiency occurs when the nano-particles are utilized compared to pure Ge crystal.

• Mass Spectrometry Letters
• /
• 제5권2호
• /
• pp.52-56
• /
• 2014

Glycated hemoglobin (HbA1c) is used as an index of mean glycemia over prolonged periods. This study describes an optimization of enzyme digestion conditions for quantification of non-glycated hemoglobin (HbA0) and HbA1c as diagnostic markers of diabetes mellitus. Both HbA0 and HbA1c were quantitatively determined followed by enzyme digestion using isotope dilution liquid chromatography-tandem mass spectrometry (ID-LC-MS/MS) with synthesized N-terminal hexapeptides as standards and synthesized isotope labeled hexapeptides as internal standards. Prior to quantification, each peptide was additionally quantified by amino acid composition analysis using ID-LC-MS/MS via acid hydrolysis. Each parameter was considered strictly as a means to improve digestion efficiency and repeatability. Digestion of hemoglobin was optimized when using 100 mM ammonium acetate (pH 4.2) and a Glu-C-to-HbA1c ratio of 1:50 at $37^{\circ}C$ for 20 h. Quantification was satisfactorily reproducible with a 2.6% relative standard deviation. These conditions were recommended for a primary reference method of HbA1c quantification and for the certification of HbA1c reference material.

• Bulletin of the Korean Chemical Society
• /
• 제35권3호
• /
• pp.929-932
• /
• 2014

We explored interfacial electronic structures in indium tin oxide (ITO)/DNTPD/N,N'-diphenyl-N,N'-bis(1-naphthyl)-1,1'-biphenyl-4,4'-diamine (NPB) layer stack in an OLED to clarify the real role of an aromatic amine-based hole injection layer, DNTPD. A hole injection barrier at the ITO/DNTPD interface is lowered by 0.20 eV but a new hole barrier of 0.36 eV at the DNTPD/NPB is created. The new barrier at the DNTPD/NPB interface and its higher bulk resistance serve as hole retardation, and thus those cause the operation voltage for the ITO/DNTPD/NPB to increase. However, it improves current efficiency through balancing holes and electrons in the emitting layer.

• 한국해양공학회지
• /
• 제24권2호
• /
• pp.74-81
• /
• 2010

Ship STEP is the international standard for the exchange of ship modeling data between heterogeneous systems. It is expected that STEP AP218 can be used for seamless data exchange between various CAD/CAM/CAE systems used in the shipbuilding design process. Although the conformance assessment for standards would maximize the performance and confidence about data exchanges, most research has been directed toward interoperability testing. ISO SC4/TC184 only provides the method for conformance testing, and it can be used with test cases on application protocols. Even though standards have been defined for conformance assessment and testing, there is no organization or association. CAD vendors have focused on interoperability testing for evaluation of the performance of their systems. In this paper, the conformance testing criteria for AP218 have been developed with abstract test cases of ship structures. The requested STEP translator was also reviewed with a developed item pool of testing criteria. The criteria methodology would be a guideline for the development of translators and interfaces. The item pool method of testing criteria for conformance assessment would increase performance and efficiency of data translators for Ship STEP and other standards.

• 한국정보과학회논문지:소프트웨어및응용
• /
• 제32권10호
• /
• pp.956-962
• /
• 2005

최신 동영상 압축 표준인 H.264는 압축 효율을 높이기 위해 기존의 표준과는 다른 1/2 화소 생성 방법을 사용한다. 그러므로 기존의 동영상 압축표준으로 압축된 비트열을 DCT 상에서 H.264로 트랜스코딩(transcoding)하기 위해서는 추가적인 보정 작업이 필요하다 본 논문에서는 MPEG-2로 압축된 비트열을 DCT 상에서 H.264로 트랜스코딩 할 때 두 표준 간 1/2 화소 값의 차이를 보정하는 기법을 제안한다. 제안된 1/2 화소 보정 기법에서는 DCT 상태의 참조 프레임을 이용하여 두 표준 간의 차이 값을 구하여 입력으로 들어온 블록의 값에 더하여 보정한다. 픽셀 기반에서 보정하는 기법과 성능을 비교한 결과 제안하는 기법이 화질 면에서 우수하였다.

• 한국항공운항학회지
• /
• 제17권3호
• /
• pp.51-60
• /
• 2009

For the world's safest air traffic, safety-related areas through the large investment made in a sufficient safe level, but the airport's lack of safety management is concerned about the safety. Airside area is essential area for the flights, and activities of safe management in airside area is very important. Grafting of airside safety management and IT, importance of the safety and efficiency is growing. Advanced airports of world has applied GIS over 10 years ago, and through applying GIS, Airports GIS has been a specialized area. Therefore, this research is for geographic information standards and related laws, providing a guideline of regulations and standards for AIXM (Aeronautical Information Exchange Model), RTCA DO-272A (USER REQUIREMENTS FOR AERODROME MAPPING INFORMATION), FAA Advisory Circular 150/5300 -18A (General Guidance and Specifications for Submission of Aeronautical Survey to NGS: Field Data Collection and Geographic Information System Standards), and by analyzing aviation information and air map(notice "Civil Aviation Safety Authority No. 2009-1"), provide the direction of standardization for air map.

• 대한의용생체공학회:의공학회지
• /
• 제32권3호
• /
• pp.264-269
• /
• 2011

To increase therapeutic efficiency and biological safety, it is important to precision control of acoustic output for therapeutic ultrasound equipment. In this paper, the electro-acoustic radiation conductance, one of electroacoustic characteristics of therapeutic ultrasound equipment, was measured by the radiation force balance method according to IEC 61161 standards and the acoustic output was estimated using the electro-acoustic radiation conductance. The estimation of acoustic output was conducted to continuous wave mode and pulse wave mode of duty cycle between 20% and 80%. The differences between prediction values and measurement results are within 5% of measurement uncertainty, which is a reasonably good agreement. The results show that acoustic output controlled by electro-acoustic radiation conductance was found to be an effective method.

• 플랜트 저널
• /
• 제15권4호
• /
• pp.30-35
• /
• 2019

미세먼지 감축에 대한 사회적 요구 증가와 강화되는 대기오염물질 배출허용기준을 충족시키기 위해 구조적 제약조건을 갖는 500 MW급 석탄화력발전소 탈황설비의 성능개선 방안을 제시하였다. 탈황설비 흡수탑을 통과하는 배기가스가 선회하도록 내부 설비를 개조하여 난류를 형성시켜 물질전달효율을 증가시키고 반응 면적 및 시간을 증가시킴으로써 황산화물 저감 및 먼지 포집 능력을 향상시킬 수 있었다. 개선결과 황산화물 제거효율은 91.61%에서 98.43%로 향상되었고 먼지 제거성능은 77.4%에서 87.08%로 향상되었다. 배출농도는 황산화물 7.85 ppm, 먼지 4.67 mg/㎥이 배출되어 2023년의 대기오염물질 배출허용기준인 황산화물 25 ppm, 먼지 5 mg/㎥을 만족하는 수준이다. 본 연구의 성능 개선 방식은 유사한 제약조건을 갖는 다른 석탄화력발전소에도 효과적으로 적용될 수 있으리라 기대된다.