• 한국컴퓨터그래픽스학회논문지
• /
• 제16권4호
• /
• pp.17-23
• /
• 2010

거리장, 볼륨 텍스처와 같은 3차원 실수 정의역을 갖는 데이터를 다룰 때, 이를 효과적으로 시각화하는 것은 중요한 주제이다. 본 논문에서는 간단한 인터페이스 구현체를 입력으로 받아 절단면 보기, 확대, 특정 위치의 값 조회 등의 작업을 효과적으로 수행하는 프레임워크를 제안한다. 인터페이스 구현체에는 다양한 알고리즘을 자유롭게 구현해 넣을 수 있으며, 여러 가지 종류의 데이터들을 조회하고 알고리즘수행 결과를 쉽게 평가할 수 있다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제11권8호
• /
• pp.3950-3964
• /
• 2017

With the increasing popularity of 3D technology such as 3D printing, 3D modeling, etc., there is a growing need to search for similar models on the internet. Matching non-rigid shapes has become an active research field in computer graphics. In this paper, we present an efficient and effective non-rigid model retrieval method based on topological structure and local volume. The integral geodesic distances are first calculated for each vertex on a mesh to construct the topological structure. Next, each node on the topological structure is assigned a local volume that is calculated using the shape diameter function (SDF). Finally, we utilize the Hungarian algorithm to measure similarity between two non-rigid models. Experimental results on the latest benchmark (SHREC' 15 Non-rigid 3D Shape Retrieval) demonstrate that our method works well compared to the state-of-the-art.

• 한국물환경학회지
• /
• 제27권3호
• /
• pp.257-263
• /
• 2011

This study analyzes the correlations between non-point sources and runoff to estimate non-point sources for effective management. From the monitoring results, the correlation factors among pollutant mass loading, EMC, total runoff volume and average flow are calculated. And using correlation factors, the most related two constituents are determined. Also the most appropriate regression between two constituents are determined. Pollutant mass loading and total runoff volume has the highest correlation. Also, compound regression is found to be the most appropriate regression. This shows that pollutant mass loading increases as total runoff volume increases. It is not continuous increase but has some pattern.

• 대한금속재료학회지
• /
• 제46권10호
• /
• pp.617-626
• /
• 2008

This study is concerned with the effect of Cu and B addition on microstructure and mechanical properties of high-strength bainitic steels. Six kinds of steels were fabricated by varying alloying elements and hot-rolling conditions, and their microstructures and tensile and Charpy impact properties were investigated. Their effective grain sizes were also characterized by the electron back-scatter diffraction analysis. The tensile test results indicated that the B- or Cu-containing steels had the higher yield and tensile strengths than the B- or Cu-free steels because their volume fractions of bainitic ferrite and martensite were quite high. The B- or Cu-free steels had the higher upper shelf energy than the B- or Cu-containing steels because of their higher volume fraction of granular bainite. In the steel containing 10 ppm B without Cu, the best combination of high strengths, high upper shelf energy, and low energy transition temperature could be obtained by the decrease in the overall effective grain size due to the presence of bainitic ferrite having smaller effective grain size.

• 상하수도학회지
• /
• 제23권2호
• /
• pp.181-187
• /
• 2009

In this study, a runoff hydrograph and runoff volume were calculated by using the kinetic wave theory for small urban watersheds based on the concept of low impact development(LID), and the effective imperviousness was estimated based on these calculations. The degree of sensitivity of the effective imperviousness of small watersheds to the impervious to pervious area ratio, infiltration capability, watershed slope, roughness coefficient and surface storage depth was then analyzed. From this analysis, the following conclusions were obtained: The effective imperviousness and paved area reduction factor decreased as the infiltration capability of pervious area increased. As the slope of watersheds becomes sharper, the effective imperviousness and the paved area reduction factor display an increasing trend. As the roughness coefficient of impervious areas increases, the effective imperviousness and the paved area reduction factor tend to increase. As the storage depth increases, the effective imperviousness and the paved area reduction factor show an upward trend, but the increase is minimal. Under the conditions of this study, it was found that the effective imperviousness is most sensitive to watershed slope, followed by infiltration capability and roughness coefficient, which affect the sensitivity of the effective imperviousness at a similar level, and the storage depth was found to have little influence on the effective imperviousness.

• 대한기계학회논문집B
• /
• 제30권6호
• /
• pp.546-552
• /
• 2006

In this paper we report fluid flow characteristics of $Al_2O_3$ nanoparicles suspended in water. Especially, the effects of volume fraction with the range of 0.01% to 0.3% and tube diameter with $310{\mu}m$ to 1.735mm on the pressure drop and the effective viscosity of $Al_2O_3$ nanoparicles suspended in water are experimentally investigated. It is shown that the effective viscosity of water-based $Al_2O_3$ nanofluids with 0.1 Vol.% through a circular tube of 1.024mm diameter is increased to about 6%. The effective viscosity from experimental results is compared with that from Einstein model. With the comparison, we show that Einstein model for determining the effective viscosity of nanofluids is not applicable to water-based $Al_2O_3$ nanofluids.

• 한국항공운항학회지
• /
• 제17권1호
• /
• pp.46-51
• /
• 2009

This paper presents results from field studies carried out to monitor off-target droplet movement of endosulfan insecticide applied to the Korea chestnut tree area. As a results, mean airborne drift values were recorded 25m as average from downwind of a single flight line(sample line) in mountain terrain and mean effective swath width was recorded 19.5m as average in a plain. In terms of characteristics of geography of Korea aerial application is mainly carried out in mountain terrain. The equipment, weather conditions, and appropriate aerial spray technic are required for effective aerial application. In particular, the pilot can get effective results when he only sprays with consideration of environment factors since there is much turbulence in mountain terrain. Eventually, the most effective factor of droplets drift is to estimate the local weather conditions exactly.

• 비파괴검사학회지
• /
• 제18권2호
• /
• pp.112-120
• /
• 1998

입자 보강 복합재료의 부피분율을 평가하기 위한 와전류 비파괴 방법을 제시하였다. 제안된 방법은 복합재의 미시구조를 설명할 수 있는 이론 모델과 와전류에 의한 전기전도도 측정을 필요로 한다. 측정한 전도도를 이론 예측값과 같게 두면 미지의 입자 부피분율이 계산된다. Mori-Tanaka 방법에 기초한 전도도 해석 모델이 소개되어 있다. 이러한 접근 방법을 SiC 입자 보강 Al 기지 ($SiC_p/Al$) 복합재에 적용하였다. 이방법으로 보강재의 부피분율을 비교적 정확하게 결정할 수 있었다. 금속간 화합물이 부피분율 평가에 미치는 영향을 논하였으며, 또한 금속간 화합물의 전도도와 기하학적 성질이 보강 입자와 같은 경우, 이 두 상의 총 부피분율을 결정할 수 있는 방법을 제시하였다.

• 정보처리학회논문지A
• /
• 제9A권1호
• /
• pp.83-92
• /
• 2002

삼차원 볼륨 영상으로부터 대상 물체를 분할하는 것은 가시화 또는 볼륨 측정을 위해서 매우 중요한 단계이다. 본 논문에서는 볼륨 가시화를 위해 널리 사용되는 르보이 필터링 방법을 개선하여 물체의 표면을 검출하는 방법을 제시한다. 그리고 형태학적 연산자를 이용하여 완전히 닫힌 표면을 생성하고 볼륨 확장 알고리즘에 의해 물체를 선택적으로 분할한다. 제시된 방법은 합성된 삼차원 구 영상과 심혈관 조영영상에 적용되었다. 이 방법을 합성된 구 영상을 사용하여 기존의 브로이 필터링과 정량적으로 비교한 결과 제시한 방법이 복셀 오차면에서 더 우수하였다. 또한 심혈관 영상을 사용하여 시각적으로 비교한 결과 역시 제시한 방법이 더 정확하였다. 본 논문에서 제시한 방법은 삼차원 영상처리에서 자주 함께 사용되는 분할, 가시화, 측정을 쉽게 연계할 수 있기 때문에 볼륨 영상의 분할을 위해 매우 효고적이다.

• 한국인터넷방송통신학회논문지
• /
• 제14권4호
• /
• pp.101-106
• /
• 2014

전 세계적으로 초고속 인터넷 망의 확충과 스마트폰의 보급에 따라 클라우드 컴퓨팅의 장점을 극대화 할 수 있는 시대가 도래 하였다. 본 연구에서는 클라우드 컴퓨팅을 활용한 모바일 환경에서의 의료영상 볼륨 렌더링 아키텍처를 제안한다. 해당 아키텍처는 값 비싼 워크스테이션 서버와 스토리지를 대체하기 위해 클라우드 컴퓨팅 서비스 중 하나인 IaaS(Infrastructure as a Service)를 사용한다. 그리고 모바일 하드웨어의 제약에서 벗어나 안정적인 렌더링을 위해 WebGL을 이용한 가시화 방법을 제안한다. 이번 연구를 통해서 모바일 환경에서의 효율적인 의료영상 볼륨 렌더링 서비스에 적용될 수 있는 기초 연구가 될 수 있기를 기대한다.