• Journal of KIISE:Software and Applications
• /
• v.31 no.10
• /
• pp.1364-1373
• /
• 2004

Recently Evolvable Hardware (EHW) is widely studied to design effective hardware circuits that can reconfigure themselves according to the environment. However, it is still difficult to apply for complicated circuits because the search space increases exponentially as the complexity of hardware increases. To remedy this problem, this paper proposes a method to evolve complex hardware with a modular approach. The comparative experiments of some digital circuits with the conventional evolutionary approach indicate that the proposed method yields from 50 times to 1,000 times faster evolution and more optimized hardware.

• Journal of the Korean Society of Industry Convergence
• /
• v.26 no.2_1
• /
• pp.239-248
• /
• 2023

In this paper, we conduct a study on the design that can secure the safety of the EPLA system by performing safety activities based on the ISO 26262 standard for vehicle functional safety. In the case of a company developing a detailed system, it is responsible for verification through hardware design and safety analysis in the overall flow of safety activities, and safety analysis according to the ASIL safety level must be properly performed. At this time, there are cases where the safety goal quantitative metric value suggested by the ISO 26262 standard cannot be satisfied only by the hardware design of the basic function, so it is necessary to design and install the safety mechanism. Based on ISO 26262 safety activities, it is possible to derive an effective design plan through hardware safety analysis.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.4
• /
• pp.765-770
• /
• 2012

In this paper, we proposed an effective hardware structure using DCT-based inra-prediction mode selection to reduce computational complexity caused by intra mode decision. In this hardware structure, the input block is transformed at first and then analyzed to determine its texture directional tendency. the complexity has solved by performing intra prediction in only predicted edge direction. $4{\times}4$ DCT is calculated in one cycle using Multitransform_PE and Inta_pred_PE calculates one prediction mode in two cycles. Experimental results show that the proposed Intra prediction encoding needs only 517 cycles for one macroblock encoding. This architecture improves the performance by about 17% than previous designs. For hardware implementation, the proposed intra prediction encoder is implemented using Verilog HDL and synthesized with Megnachip $0.18{\mu}m$ standard cell library. The synthesis results show that the proposed architecture can run at 125MHz.

• 제어로봇시스템학회:학술대회논문집
• /
• 2002.10a
• /
• pp.84.5-84
• /
• 2002

In order to be a stand-alone structure, a biped robot should be designed of the effective mechanic structure and the smaller hardware system. This paper shows the design methodology of a biped robot controller using FPGA(Field Programmable Gate Array). A hardware system consists of DSP(Digital Signal Processor) as the main CPU and FPGA as the motor controller...

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.05a
• /
• pp.371-373
• /
• 2015

This paper describes an analysis of hardware design conditions of moving object detection algorithm which is based on effective Gaussian mixture learning (EGML). The simulation model of EGML algorithm is implemented using OpenCV, and it is analyzed that the effects of parameter values on background learning time and moving object detection sensitivity for various images. In addition, optimal design conditions for hardware implementation of EGML-based MOD algorithm are extracted from fixed-point simulations for various bit-width parameters.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.43 no.11 s.353
• /
• pp.90-97
• /
• 2006

In this paper, we present a cost-effective architecture of high-speed soft-decision Viterbi decoder for Multi-band OFDM(MB-OFDM) systems. In the design of modem for MB-OFDM systems, a parallel processing architecture is general]y used for the reliable hardware implementation, because the systems should support a very high-speed data rate of at most 480Mbps. A Viterbi decoder also should be designed by using a parallel processing structure and support a very high-speed data rate. Therefore, we present a optimized hardware architecture for 4-way parallel processing Viterbi decoder in this paper. In order to optimize the hardware of Viterbi decoder, we compare and analyze various ACS architectures and find the optimal one among them with respect to hardware complexity and operating frequency The Viterbi decoder with a optimal hardware architecture is designed and verified by using Verilog HDL, and synthesized into gate-level circuits with TSMC 0.13um library. In the synthesis results, we find that the Viterbi decoder contains about 280K gates and works properly at the speed required in MB-OFDM systems.

• Proceedings of the IEEK Conference
• /
• 2002.07a
• /
• pp.305-308
• /
• 2002

This paper proposes a control board that includes PNP function with extensibility and effective allocation of allocation. The object of study is to overcome limited extensity of old systems and it is to reuse the system. The system recognizes automatic subsystem from application of main system with board level that is using hardware and software co-design method. The system has both function of main-board and sub-board. So one system can operate simultaneously such as module of alien system. This system has advantages that are fast execution, according as process functional partition to hardware/ software co-design and board size is reduced as well as offer extensity of development system. We obtained good result with control board for existent Z-80 training kit.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.35-36
• /
• 2006

This paper presents an effective multiplier in GF($2^m$) based on programmable cellular automata (PCA) and uses a normal basis. The proposed architecture has the advantage of high regularity and a reduced latency. The proposed architecture can be used in the effectual hardware design of exponentiation, division, inversion architectures.

• Journal of Information Processing Systems
• /
• v.17 no.6
• /
• pp.1157-1169
• /
• 2021

Modern graphics processor unit (GPU) architectures offer significant hardware resource enhancements for parallel computing. However, without software optimization, GPUs continuously exhibit hardware resource underutilization. In this paper, we indicate the need to alter different warp scheduler schemes during different kernel execution periods to improve resource utilization. Existing warp schedulers cannot be aware of the kernel progress to provide an effective scheduling policy. In addition, we identified the potential for improving resource utilization for multiple-warp-scheduler GPUs by sharing stalling warps with selected warp schedulers. To address the efficiency issue of the present GPU, we coordinated the kernel-aware warp scheduler and warp sharing mechanism (KAWS). The proposed warp scheduler acknowledges the execution progress of the running kernel to adapt to a more effective scheduling policy when the kernel progress attains a point of resource underutilization. Meanwhile, the warp-sharing mechanism distributes stalling warps to different warp schedulers wherein the execution pipeline unit is ready. Our design achieves performance that is on an average higher than that of the traditional warp scheduler by 7.97% and employs marginal additional hardware overhead.

• Journal of the Korean Society of Systems Engineering
• /
• v.12 no.2
• /
• pp.101-114
• /
• 2016

A model-based systems engineering (MBSE) approach to implementing hardware-based network cybersecurity controls for APR1400 non-safety data network is presented in this work. The proposed design was developed by implementing packet filtering and deep packet inspection functions to control the unauthorized traffic and malicious contents. Denial-of-Service (DoS) attack was considered as a potential cybersecurity issue that may threaten the data availability and integrity of DCS gateway servers. Logical design architecture was developed to simulate the behavior of functions flow. HDL-based physical architecture was modelled and simulated using Xilinx ISE software to verify the design functionality. For effective modelling process, enhanced function flow block diagrams (EFFBDs) and schematic design based on FPGA technology were together developed and simulated to verify the performance and functional requirements of network security controls. Both logical and physical design architectures verified that hardware-based cybersecurity controls are capable to maintain the data availability and integrity. Further works focus on implementing the schematic design to an FPGA platform to accomplish the design verification and validation processes.