• International journal of advanced smart convergence
• /
• v.11 no.4
• /
• pp.96-103
• /
• 2022

This paper presents the analysis of increasing the resolution of True-Time-Delay (TTD) by 0.5-bit for phased-array antenna system which is one of the Multiple-Input and Multiple Output (MIMO) technologies. For the analysis, a 5.5-bit True-Time Delay (TTD) integrated circuit is designed and analyzed in terms of beam steering performance. In order to increase the number of effective bits, the designed 5.5-bit TTD uses Single Pole Triple Throw (SP3T) and Double Pole Triple Throw (DP3T) switches, and this method can minimize the circuit area by inserting the minimum time delay of 0.5-bit. Furthermore, the circuit mostly maintains the performance of the circuit with the fully added bits. The idea of adding 0.5-bit is verified by analyzing the relation between the number of bits and array elements. The 5.5-bit TTD is designed using 0.18 ㎛ RF CMOS process and the estimated size of the designed circuit excluding the pad is 0.57×1.53 mm². In contrast to the conventional phase shifter which has distortion of scanning angle known as beam squint phenomenon, the proposed TTD circuit has constant time delays for all states across a wide frequency range of 4 - 20 GHz with minimized power consumption. The minimum time delay is designed to have 1.1 ps and 2.2 ps for the 0.5-bit option and the normal 1-bit option, respectively. A simulation for beam patterns where the 10 phased-array antenna is assumed at 10 GHz confirms that the 0.5-bit concept suppresses the pointing error and the relative power error by up to 1.5 degrees and 80 mW, respectively, compared to the conventional 5-bit TTD circuit.

• Korean Journal of Social Welfare Studies
• /
• v.42 no.2
• /
• pp.443-465
• /
• 2011

This study is to validate the effectiveness of family resilience program which was developed with a purpose of enhancing parenting participation, parenting behavior, and attitude on disabled children, intimacy of fathers with a disabled child. The program is based on the concept of family resiliency, consisting of its subordinate elements which are belief system, organizational pattern, and communication process. Participants for this study were fathers having a disabled child who is enrolled in welfare centers in Seoul. The program, which was composed of seven sessions, was held once a week two hours for each. For validation, the test group and the controlled group were under comparative analysis. To this end, non-paramatic tests, Mann-Whitney U test and Wilcoxon-signed ranks test, were applied. The study showed that the controlled group did not demonstrate significant change in parenting participation, parenting behavior, and attitude on disabled chilren, intimacy, while the test group made a meaningful improvement on parenting participation, attitude on disabled chilren after participating in the program. This family resilience program is proved to be effective, having fathers with a disabled child actively participate in child rearing and recognize the attitude with a disabled child more positively. The finding of this study surely has an implication for social work practice, especially for intervention in fathers with a disabled child.

• Archives of design research
• /
• v.16 no.1
• /
• pp.181-198
• /
• 2003

The purpose of this study is to develop a on-line design tool for effectively coping with e-Business environment, or product design process into a Cyber model for traditional manufacturers which attempts new product development under such environment. It was finally developed as a model named $\ulcorner$Design Vortal Site; e-BVDS) that was based on the structure and style of internet web site. Results of the study can be described as follows ; \circled1 e-Business is based on the Internet. All processes in the context of e-Business require models whose structure and method of use are on-line styles. \circled2 In case that a traditional manufacturing business is converted into e-Business, it is better to first consider Hybrid Model that combines resources and advantages of both such traditional and digital businesses. \circled3 The product design process appropriate for e-Business environment has to have a structure and style that ensure utilization of the process as an Internet web site, active participation by product developers and interactive communication between participants in designing and designers. \circled4 $\ulcorner$e-BDVS) makes possible the use of designers around the wend like in-house designers, overcoming lack in creativity, ideas and human resources traditional business organizations face. However, the operation of $\ulcorner$e-BDVS$\lrcorner$ requires time and budget investments in securing related elements and conditions. \circled5 Cyber designers under $\ulcorner$e-BDVS$\lrcorner$ can easily perform all design projects in cyber space. But they have some limits in playing a role as designers and they have difficulty in getting rewards if such projects completed by them are not finally accepted. \circled6 $\ulcorner$e-BDVS) ensures the rapid use of a wide range of design information and data, reception of a variety of solutions and ideas and effective design development, all of which are not possible through traditional processes. However, this process may not be suitable to be used routine process or tool. \circled7 $\ulcorner$e-BDVS$\lrcorner$ makes it possible for out-sourcing or partners businesses to overcome restrictions in time and space and improve productivity and effectiveness. But such they may have to continue off-line works that can not be treated on-line.

• International Journal of Contents
• /
• v.10 no.1
• /
• pp.54-61
• /
• 2014

In this paper, we propose a pioneering concept of DPD(Disaster Prevention Design) to realize a securable society in the future. Features of danger in the future society are expected to be diverse, abrupt occurring, large scale, and complicated ways. Due to increment of dangers with their features of uncertainty, interactivity, complexity, and accumulation, human-oriented design concept naturally participates in activities to prevent our society against disasters effectively. We presented DPD is an essential design activity in order to cope with dangers expected in the future societies as well as realize securable environments. DPD is also an integrated design aids including preemptive protections, rapid preparing, recovery, and interactive cooperation. We also expect these activities of DPD is effective for generation of new values in the market, satisfaction of social needs, expansion of design industry, and a novel chance for development in the future society. Throughout this paper, we submit various aspects of DPD concepts including definition, classification, scope, necessity, strategy, influencing elements, process, and its principle. We expect these concepts will be the seed and/or basement of DPD research for the future works. For the direction of study for DPD in the future, we emphasize alarm system for preemptive protection rather than recovery strategy for the damage occurred. We also need to research about progressive prevention techniques and convergence with other areas of design. In order to transfer the concept of product design from facility-oriented mechanism to human-oriented one, we should develop new kinds of city basis facilities, public-sense design concepts referred to social weak-party, e-Learning content design preparing disasters, and virtual simulation design etc. On the other hand, we have to establish laws and regulations to force central and/or provincial governments to have these DPD strategies applying their regional properties. Modern design activities are expanding to UI(user interface) content design area overcoming the conventional design concept of product and/or service. In addition, designers are recognized as art directors or life stylists who will change the human life and create the social value. DPD can be divided into prevention design, preparedness design, response design, and recovery design. Five strategies for successful DPD are Precaution-oriented, Human-oriented, Sense-oriented, Legislation, and Environment Friendly Strategies.

• The Journal of Korean Physical Therapy
• /
• v.6 no.1
• /
• pp.49-60
• /
• 1994

Stress is experienced when a person tries to maintain stability in the face of life change but is not able to meet the adaptive demands of change. This can be especially true for the parents who has a cerebral palsy childs who needs long term rare, where parents, are the primary source of care and responsibility. Successful coping leads to maintenance of the parents role and this has an effect on the health status of the child. This descriptive study was attempted to identify stress factors, levels and helpful coping patterns for parents who must take care of cerebral palsy children. Data were collected from 43 subjects who were parents of children diagnosed with cerebral palsy The informations gathered from March 25, 1994 to April 14, 1994 by means of structured questionnaires were analyzed. Two instruments were used to collect the data 1) Lee's stress questionnaire consisted of 33 stress factors and measured by four point Likert scale. 2) Modified Chronic Health Inventory for parents: The modified CHIP included 43 items of coping methods with four point Likert scale. The results of this study were as follows: 1) Stress items could have a maximum score of three points, for a total possible score of 132 points. The mean score for the total was 92.02 points. The item mean score was 2.85 points showing that the parents were experiencing moderate to much stress. 2) The items with the highest stress items were 16 items. The stress items with the lowest mean scores were 10 items. 3) Of the stress categories: The highest stress category was related to changes in the illness status of the child and difficulty in taking rare of the child. The second stressful category was related to the prognosis of the child's condition. The least stress was noticed to social-personal relationships and the responsibility of the care givers. 4) Items measuring coping in the parents had a maximum score of three points each with a total possible roping score of 172 points. The mean score for the total was 103,9 paints. The item mean score was 2.42 points indicating that there were responses of little helpful to moderately helpful on each coping pattern. 5) The most helpful coping items were 7 items. The least helpful coping items were 2 items. 6) Effectiveness of the coping for each patterns was examined : Understanding the illness condition from communication with parents of children with the same condition and consultation with the medical team was the most helpful coping pattern. Family's coorperation and integration and optimism were a moderately helpful coping pattern. Social support psychological stability and self esteem were the least helpful toping pattern. In conclusion, the highest stress for parents of children with cerebropalsy was found to be very stressful changes in the illness of the child and to taking care of a child who is suffering. The parents were helped by the coping methods using understanding of the illness condition through consultation with the medical learn and communication with parents in the same situation. Based on the knowledge, care could develop intervention strategies appropriate for them, help them to develop their effective coping patterns, and give support them in the process of coping with their stress.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.6 no.2
• /
• pp.243-248
• /
• 2011

In this paper, we propose a new method to extract palm lines and read it with simple techniques from one photo. We use morphological information and 8-directional contour tracking algorithm. From the digitalized image, we transform original RGB information to YCbCr color model which is less sensitive to the brightness information. The palm region is extracted by simple threshold as Y:65~255, Cb:25~255, Cr:130~255 of skin color. Noise removal process is then followed with morphological information of the palm such that the palm area has more than quarter of the pixels and the rate of width vs height is more than 2:1 and 8-directional contour tracking algorithm. Then, the stretching algorithm and Sobel mask are applied to extract edges. Another morphological information that the meaningful edges(palm lines) have between 10 and 20 pixels is used to exclude noise edges and boundary lines of the hand from block binarized image. Main palm lines are extracted then by labeling method. This algorithm is quite effective even reading the palm from a photographed by a mobile phone, which suggests that this method could be used in various applications.

• Korean journal of communication and information
• /
• v.45
• /
• pp.220-254
• /
• 2009

Presidential TV debates serve as an important instrument for the general viewers to evaluate the candidates’ character, to examine their policy, and finally to make an important political decisions to cast ballots. Every words candidates utter in the course of entire election campaign exert influence of a certain significance by delivering their ideas and by creating clashes with their respective opponents. This study focuses on the conceptual venue, coined as ‘stasis’ by ancient rhetoricians, in which the clashes take place, and examines the words selection made by each candidates, the manners in which they form stasis, call for evidence, educate the public, and finally create a legitimate form of political argumentation. The study applied computer based content analysis using KrKwic and UCINET software to analyze semantic networks among the candidates. The results showed three major candidates, namely Lee Myung Bak, Jung Dong Young, and Lee Hoi Chang, displayed separate patterns in their use of language, by selecting the words that are often neglected by their opponents. Apparently, the absence of stasis and the lack of speaking mutual language significantly undermined the effects of debates. Central questions regarding issues of North Korea failed to meet basic requirements, and the respondents failed to engage in effective argumentation process.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.10 s.101
• /
• pp.1050-1058
• /
• 2005

This paper presents how to design and implement a very compact, cost effective and broad band receiver module for IEEE 802.16 FWA(Fixed Wireless Access) in the 40 GHz band. The presented receiver module is fabricated in a multi-layer LTCC(Low Temperature Cofired Ceramic) technology with cavity process to achieve excellent electrical performances. The receiver consists of two MMICs, low noise amplifier and sub-harmonic mixer, an embedded image rejection filter and an IF amplifier. CB-CPW, stripline, several bond wires and various transitions to connect each element are optimally designed to keep transmission loss low and module compact in size. The LTCC is composed of 6 layers of Dupont DP-943 with relative permittivity of 7.1. The thickness of each layer is 100 um. The implemented module is $20{\times}7.5{\times}1.5\;mm^3$ in size and shows an overall noise figure of 4.8 dB, an overall down conversion gain of 19.83 dB, input P1 dB of -22.8 dBm and image rejection value of 36.6 dBc. Furthermore, experimental results demonstrate that the receiver module is suitable for detection of Digital TV signal transmitted after up-conversion of $560\~590\;MHz$ band to 40 GHz.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.47 no.7
• /
• pp.52-60
• /
• 2010

In this paper, we propose a dynamic power management framework for multi-core systems. We reduced the power consumption of multi-core processors such as Intel Centrino Duo and ARM11 MPCore, which have been used at the consumer electronics and personal computer market. Each processor uses a different technique to save its power usage, but there is no embedded multi-core processor which has a precise power control mechanism such as dynamic voltage scaling technique. The proposed dynamic power management framework is suitable for smart phones which have an operating system to provide multi-processing capability. Basically, our framework follows an intuitive idea that reducing the power consumption of idle cores is the most effective way to save the overall power consumption of a multi-core processor. We could minimize the energy consumption used by idle cores with application-targeted policies that reflect the characteristics of active workloads. We defined some properties of an application to analyze the performance requirement in real time and automated the management process to verify the result quickly. We tested the proposed framework with popular processors such as Intel Centrino Duo and ARM11 MPCore, and were able to find that our framework dynamically reduced the power consumption of multi-core processors and satisfied the performance requirement of each program.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.37 no.5
• /
• pp.845-853
• /
• 2017

The main reason for urban traffic problems is the increasing in the use of private cars. In order to solve this problem, strong traffic demand management policies such as the collection of congestion tolls and the crackdown on freight vehicles are emerging. Now, however, it is necessary to seek ways for users to make changes in traffic behavior through direct communication between public agencies and passenger car users. As a technique to make this possible, mobility management, which aims to use rational passenger cars by inducing behavior change through individual consciousness change, has recently been proved to be effective in overseas. Therefore, this study concluded that the introduction of MM, which emphasizes individual voluntary behavior change, is necessary at present. In order to investigate the ways of inducing voluntary changes in traffic behavior of passenger car users, a questionnaire survey was conducted on traffic experts and the priorities of voluntary traffic behavior change measures were calculated using AHP. As a result of the analysis, it was shown that "to actively appeal to change the traffic behavior by using the mass media" was the top priority. The next priority were in order of company education for the change of traffic behavior, education for the school, and small-scale workshops.