• Applied Biological Chemistry
• /
• v.24 no.1
• /
• pp.7-14
• /
• 1981

Among the Basidiomycetes, Pleurotus ostreatus 301 and Lentinus edodes 3-1 were chosen because of their good enzyme productivity and rapid mycelial growth in rice straw medium. Their cultural conditions adequate for the enzymes production and effects of various materials and inorganic salts added to thd rice straw media were investigated. L. edodes 3-1 was excellent in productivity of cellulase and xylanase, and P. ostreatus 301 in protease. The optimum conditions for enzyme production were at $30^{\circ}C$ in cellulase production and at $25^{\circ}C$ in xylanase and protease production, with 75% moisture content and 5.0-6.0 initial pH. The appropriate cultural periods, for enzyme production were 30 days and 35 days for P. ostreatus 301 and L. edodes 3-1, respectively. Among the various materials added, defatted soybean, defatted rape seed, or defatted sesame were all effective to enzyme production but reduced mycelial growth. Rice bran was also effective, particularly at 30% concentration. The addition of inorganic salts showed effective to enzyme production. Among inorganic salts, optimum concentration of $CaCO_3$ was 5%, and that of $CaSO_4$ was 2%.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.23 no.1
• /
• pp.139-144
• /
• 2023

Recently, many manufacturing companies are paying more attention to energy efficiency due to increased energy costs. Energy-efficient scheduling of production systems is a good method for energy efficiency improvement and cost reduction. In this research, we assumed the tire production problem and aim to construct a production scheduling considering specific shape module types, ordered amount for each tire, number of production modules, and the production time for each type. To facilitate effective production scheduling, we considered the types and number of shape modules currently available, and tire types that can be selected to be produced in the next stage were used as additional inputs, In addition to that, additional production was permitted to reduce the halt of production processing. Thus, an average production module utilization rate of about 62 percent was obtained.

• Bulletin of the Korean Chemical Society
• /
• v.27 no.3
• /
• pp.361-362
• /
• 2006

• IE interfaces
• /
• v.16 no.4
• /
• pp.463-472
• /
• 2003

In this study we consider the problem of MPS(master production planning) of TFT-LCD(Thin Film Transistor - Liquid Crystal Display) production factory. Due to the complexities of the TFT-LCD production processes, it is difficult to build effective MPS. This study presents an algorithm having a concept of IDPQ(Ideal Daily Production Quantity) that considers line balancing of TFT-LCD production process. In general, the MPS building procedure does not consider line balancing in non-bottleneck processes. MPS without considering line balancing may make ineffective schedule. We present algorithms for building MPS considering factory capacity and line balancing according to the sales order.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2003.05a
• /
• pp.1-7
• /
• 2003

This paper considers an Integrated one-vendor multi-buyer production-inventory model where the vendor manufactures multiple products In lot at Her associated finite production rates In the model. It is allowed for earth product to be shipped In lot to the buyers before the whole product production is not completed yet. Each product lot is dispatched to the associated buyer In a number or shipments. The buyers consume their products at fixed rates. The objective is to the production and shipment schedules in the Integrated system. which minimizes the mean total annual cost per unit time. The mean total annual cost consists or production setup cost inventory holding cost and shipment cost. For the model, an Iterative optimal solution procedure with shipment consolidation policy incorporated is derived. It is then tested through numerical experiments to show how efficient and effective He shipment consolidation policy is.

• Microbiology and Biotechnology Letters
• /
• v.22 no.6
• /
• pp.565-570
• /
• 1994

The pullulan production and morphological change of Aureobasidium pullulans ATCC 9348 were investigated both in batch fermentation and in continuous fermentation. The best carbon source for pullulan production was sucrose among seven different carbon sources. The pullulan production of A. pullulans was increased with increasing the carbon to nitrogen ratio of the medium using sucrose as a carbon source. In batch fermentation, production of pullullan occurred following exhaustion of the nitrogen source from the medium. The continuous fermentation showed that the pullulan production was closely parallelled with cell growth and was most effective at a dilution rate of 0.06~0.07 hr$^{-1}$-. The ratio of yeast-like cells(blastospores) of A. pullulans increased with the increase of growth rate, and reached 100% over the growth rate of 0.07 hr$^{-1}$. The growth rate, within a certain range, affected not only on the cell morphology, but on the specific pullulan productivity of A. pullulans.

• Journal of Applied Biological Chemistry
• /
• v.49 no.3
• /
• pp.106-109
• /
• 2006

Improvement of L-asparate ${\beta}-decarboxylase$ production from Pseudomonas dacunhae ATCC 21192 was attempted by optimizing fermentation conditions. Optimum carbon and nitrogen sources for cell growth and enzyme production were determined. L-Glutamate (2%) was the most suitable carbon source, and D-glucose, D-glycerol and fumarate repressed enzyme production. Yeast extract (2%) was the most effective as nitrogen source. A slight change of pH to 6.5 from medium pH resulted in a meaningful increase in the production of enzyme. The production of the enzyme was highly improved by using 2% yeast extract and 2% L-glutamate in culture media. Maximum L-asparate ${\beta}-decarboxylase$ activity reached up to over 24 U/mL-broth by 15 h flask fermentation.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.10a
• /
• pp.603-606
• /
• 2015

The post-production of smart farming defines the stage that the final products are delivered from producer to consumers via market on ICT network. It deals with the process of product packaging and distribution from producer to consumer with marketing strategy. This focus on reference model for post-production service including specialization, centralization of product delivery, and just-in-time delivery, and marketing system on the network. It defines a significant function component on post-production stage. The producer plays a significant role in economy being one of the main contributors to the many customers. This articles suggest the effective product distribution service which requires delivering the right product, in the right quantity, in the right condition, to the right place, at the right time, for the right cost, and encompassing global marketing based on ICT network, will be provided[1].

• IE interfaces
• /
• v.12 no.2
• /
• pp.222-236
• /
• 1999

This paper presents a design and implementation of an intelligent-integrated production-logistics systems. The situation considered here is that there are multiple manufacturing plants and multiple distribution centers. Effective distribution resource and production planning are required to reduce inventory cost and to avoid inventory shortage. We propose an intelligent forecasting scheme of each distribution centers, adaptive inventory replenishment planning, distribution resource planning, and integrated production planning system. In forecasting a huge number of on-line model identification is performed using neural network approximation capability. An efficient adaptive replenishment planning and distribution resource planning are also presented in connection with forecasting scheme. An appropriate production is also requested based on production lead-time and the results of distribution planning. Experimental simulations are presented to verify the proposed approach using real data.

• Journal of the Korea Safety Management & Science
• /
• v.5 no.4
• /
• pp.147-156
• /
• 2003

Each method for economic evaluation has its own characteristics. Therefore adoption of each of them in evaluation production investment project results in many problems. Hence combination & modification of them are required to perform more accurate evaluation about investment project. This paper discuss evaluation method of investment projects expansion and replacement investment on each line or individual in the production. Generally investment evaluation method has add to a few method by Subsidiary means with use a especial method. And then in this paper, a Taguchi Techniques is presented, which may be effective to the facilities appraisal or improvement. We propose a decision model to incorporates the values assigned by a group of experts on different factors in production. Using this model, SN ratio of taguchi method for each of subjective factors as well as values of weights are used in this comprehensive method for reducing production rate in production management.