• 제목/요약/키워드: Effective Penetration Depth

검색결과 103건 처리시간 0.025초

소형루프 전자탐사를 이용한 폐기물 오염범위 탐지 (Investigation of Contamination Area from Landfill Using the Small-loop Electromagnetic Survey)

  • 송성호;엄재연;조인기;정차연
    • 지구물리와물리탐사
    • /
    • 제14권2호
    • /
    • pp.158-163
    • /
    • 2011
  • 소형루프 전자탐사는 폐기물 매립지로부터 발생되는 오염원의 범위 및 경로를 추적하기 위한 개략적인 조사에 효과적인 방법이다. 본 연구에서는 매립물 분포 범위 및 침출수 발생 범위 파악을 위하여 다중주파수를 이용한 소형루프 전자탐사를 수행하였으며, 탐사 결과를 24곳의 트렌치 조사와 12개소의 시추조사에서 확인된 오염범위와 비교한 결과 매립지의 규모 및 침출수 범위 추정이 가능한 것으로 밝혀졌다. 그러나 본 매립지가 해안지역 삼각주에 위치함에 따라 약10 m 이하 심도에서 나타나는 10 ohm-m 이하의 낮은 전기비저항의 원인을 규명하기 위해서는, 10 m 이하 심도까지 시추조사를 병행하는 것이 바람직할 것으로 판단된다.

불량쓰레기 매립지에 대한 물리탐사 적용사례 연구(I) (A Study of Geophysical Surveys for the Open Waste Dumping Landfill (I))

  • 이재영;김학수
    • 한국토양환경학회지
    • /
    • 제1권1호
    • /
    • pp.29-38
    • /
    • 1996
  • 폐기물 매립지의 수평크기와 심도 파악을 위해 여러 물리탐사법중에서 GPR과 전기비저항 탐사에 의한 조사가 시험으로 수행되었다. 탐사는 조사대상지역의 현장여건으로 인해 경계부와 매립지 중심부 일부에 제한되었다. GPR탐사에서는 50MHz 안테나를 이용하였고 전기비저항탐사는 쌍극자 배열법으로 수행되어졌으며, 복합해석을 위한 중복탐사가 이루어졌다. GPR 탐사에 의한 쓰레기 매립지 수평경 계 해석은 가능하였으며, 심도는 수평경계를 포함한 일부 구간에서만 확인되었다. 전기 비저항탐사는 매립지내의 물성을 제공함으로서 비교해석이 가능하다면 효과적인 정보획득이 가능할 것으로 예상된다. 이 해석결과는 주변의 사추결과와 잘 일치되었으며, 따라서, 매립지의 수평적 크기와 규모 파악을 위한 조사시 두 조사법의 조합은 적합하다고 판단된다.

  • PDF

연속관입형 소형콘관입시험기에 대한 크기효과 및 현장적용 (Scale Effects and Field Applications for Continuous Intrusion Miniature Cone Penetrometer)

  • 윤성수;김규선;이진형;신동현
    • 대한토목학회논문집
    • /
    • 제33권6호
    • /
    • pp.2359-2368
    • /
    • 2013
  • 콘관입시험은 현장조사 시험법으로 사용 빈도가 증가되고 있다. 그러나 콘관입시험은 콘크기와 용량 등에 따라 적용 가능한 현장조건이 제한되는 단점이 있다. 소형콘의 감소된 단면적은 시스템 용량을 증대시켜 적용성을 향상시킬 수 있으며, 코일식 롯드를 이용한 연속관입 시스템은 신속하고 경제적인 지반조사를 가능하게 한다. 본 연구에서는 국내 여러 현장에서 연속관입형 소형콘관입시험 시스템의 성능을 표준 콘관입시험 시스템과의 비교시험을 통하여 평가하였다. 소형콘관입시험 장비는 기존의 표준콘관입시험 장비와 비교하여 지반정수 도출 및 지반분류에 동일한 성능을 발휘하는 것을 확인하였으며, 장비의 기동성 및 적용대상 토질 확대 등의 장점을 나타내는 것으로 평가되었다. 크기효과 검증을 위한 현장시험 결과 기존 시험 방법에 비해 콘저항력의 경우는 약 10% 과대평가하는 것으로 나타났다. 차량 형태의 조사장비는 표층이 연약하거나 진입이 어려운 경우에는 조사의 한계가 있으므로, 궤도장치에 탑재된 연속관입형 소형콘관입시험 시스템으로 개선하여 적용성을 확대시켰다. 따라서 개선된 연속관입형 소형콘관입시험 시스템은 연약지반 심도탐지 및 흙분류시 경제적이고 신뢰성 높은 지반조사 방법으로 활용할 수 있다.

유전치 Resin Infiltration을 위한 표면처리 방법의 대안 (Alternative Pretreatment Methods for Resin Infiltration in Primary Anterior Teeth)

  • 이은경;신종현;김지연;정태성;김신
    • 대한소아치과학회지
    • /
    • 제45권2호
    • /
    • pp.179-184
    • /
    • 2018
  • 본 연구는 유전치 순면의 백색병소에 대한 표면처리 방법에 따른 레진 침투법의 침투 깊이를 공초점 레이저 주사 현미경으로 조사함으로써, 유치의 초기 우식병소에 대한 레진침투법 적용 과정에서, 염산 이외의 대안적 표면처리 방법을 모색할 목적으로 시도되었다. 15% 염산 단독으로 2분간 산부식 한 대조군과 35% 인산 단독으로 2분간 산부식을 시행한 I군 간의 유의한 차이는 보이지 않았다. 하지만 이 두 그룹과 인산 산부식 전 치면세마용 퍼미스 또는 연마용 metal strip으로 표면 전처리를 한 그룹 간에는 레진 침투율에서 유의한 차이를 확인하였다(p < .05). 유전치 초기 우식 병소에 레진 침투법을 시행할 때에는 35% 인산 단독 산부식만으로도 15% 염산을 이용한 산부식에 비견할 만한 침투 효과를 보이는 것을 확인하였다. 또한 레진의 침투 효과를 높이기 위해서는 산부식 전 병소 표면에 기계적 마모술을 적용하는 것이 효과적인 방법이 될 수 있음을 보여주었다. 이러한 방법은 소아치과 영역에서 레진침투법을 사용하기에 비교적 안전하고 쉽게 활용할 수 있는 표면처리 방법이라 볼 수 있다.

소산 실험을 이용한 관입 장비의 교란 효과 추정 (Evaluation of Disturbance Effect of Penetrometer by Dissipation Tests)

  • 윤형구;홍성진;이우진;이종섭
    • 대한토목학회논문집
    • /
    • 제28권6C호
    • /
    • pp.339-347
    • /
    • 2008
  • 현장 관입 실험은 프로브 관입에 따라 주변 지반을 의도적으로 파괴시켜 지반특성을 파악할 수 있다. 본 논문의 목적은 현장 점토지반에 서로 다른 크기의 프로브 관입으로 인한 간극 수압 소산 특성을 이용하여 파괴에 따른 교란 효과를 분석하는 것이다. 현장 실험을 수행하기 위해 콘관입 시험(CPT), 딜라토미터 시험(DMT) 그리고 현장 속도 프로브 장비(FVP: Field Velocity Probe)가 사용되었다. 샌드 매트(sand mat), PBD 그리고 사석을 이용한 지반 개량 중인 부산 북컨테이너 현장에서 실험이 진행 되었으며, 샌드 매트(sand mat)공법 이후 실내 실험을 수행하기 위해 시료가 채취 되었다. 실내에서는 물성치 실험 및 압밀 실험을 수행하여 지반 특성과 수평압밀계수 값을 도출하였다. 현장 실험은 지반 개량 후 압밀도 90% 시점에서 사석 제거 후 케이싱을 통해 CPT, DMT 그리고 FVP 순서대로 실험이 수행 되었다. 관입에 따른 영향 범위를 최소화 시키기 위해 각각의 실험은 3m 간격을 유지 하였으며, 매 심도 24m에서 관입을 멈추고 시간에 따른 간극 수압 변화 양상을 측정하였다. 실내 압밀 실험을 통해 수평 압밀 계수$(C_h)$를 산정하였으며, 현장 실험을 통해 각 프로브에 따른 $t_{50}$ 값을 계산 하였다. $t_{50}$값을 이용하여 산정된 등가 유효 반경은 FVP가 가장 작게 그리고 DMT가 가장 크게 산정되었다.

EMI database analysis focusing on relationship between density and mechanical properties of sedimentary rocks

  • Burkhardt, Michael;Kim, Eunhye;Nelson, Priscilla P.
    • Geomechanics and Engineering
    • /
    • 제14권5호
    • /
    • pp.491-498
    • /
    • 2018
  • The Earth Mechanics Institute (EMI) was established at the Colorado School of Mines (CSM) in 1974 to develop innovations in rock mechanics research and education. During the last four decades, extensive rock mechanics research has been conducted at the EMI. Results from uniaxial compressive strength (UCS), Brazilian tensile strength (BTS), point load index (PLI), punch penetration (PP), and many other types of tests have been recorded in a database that has been unexamined for research purposes. The EMI database includes over 20,000 tests from over 1,000 different projects including mining and underground construction, and analysis of this database to identify relationships has been started with preliminary results reported here. Overall, statistically significant correlations are identified between bulk density and mechanical strength properties through UCS, BTS, PLI, and PP testing of sedimentary, igneous, and metamorphic rocks. In this paper, bulk density is considered as a surrogate metric that reflects both mineralogy and porosity. From this analysis, sedimentary rocks show the strongest correlation between the UCS and bulk density, whereas metamorphic rocks exhibit the strongest correlation between UCS and PP. Data trends in the EMI database also reveal a linear relationship between UCS and BTS tests. For the singular case of rock coral, the database permits correlations between bulk density of the core versus the deposition depth and porosity. The EMI database will continue under analysis, and will provide additional insightful and comprehensive understanding of the variation and predictability of rock mechanical strength properties and density. This knowledge will contribute significantly toward the increasingly safe and cost-effective geostructures and construction.

Status and Prospect of Test Methods of Quality Silicone Water Repellent for Protecting Reinforced Concrete

  • Sun, H.Y.;Yuan, Z.Y.;Yang, Z.;Shan, G.L.;Shen, M.X.
    • Corrosion Science and Technology
    • /
    • 제16권3호
    • /
    • pp.141-150
    • /
    • 2017
  • Impregnating with quality silicone water repellent on the concrete surface is an effective method of protecting concrete. Quality silicone water repellent has been widely used in the engineering profession because of its desirable properties such as hydrophobicity, keeping concrete breathable and preserving the original appearance of the concrete. The companies in China that produce silicone water repellent are listed. Test methods in the specifications or standards about silicone water repellent in China are summed. The test methods relative to durability of concrete impregnated with silicone water repellent (such as resistant to chloride ion penetration, resistant to alkali, resistance to freezing and thawing and weatherability etc.) and the constructive quality (such as water absorption rate, impregnating depth and the dry velocity coefficient etc.) are compared and analyzed. The results indicate that there are differences among test methods relative to different specifications with the same index and therefore, confusion has ensued when selecting test methods. All test methods with the exception of the method of water absorption rate by using a Karsten flask are not non-destructive methods or conducted in a laboratory. Finally, further research on silicone water repellent during application is proposed.

파일길이비와 암반층의 위치에 따른 마이크로파일 설치방법 (Installation Methods of Micro-piles by the Length Ratio of Pile and the Depth of Rock Layer)

  • 황태현;권오엽
    • 한국지반공학회논문집
    • /
    • 제27권4호
    • /
    • pp.5-20
    • /
    • 2011
  • 본 연구는 토사지반 또는 유한심도 내 암반층이 있는 지반을 대상으로 마이크로파일의 효과적인 설치방법을 제안하고 제안된 설치방법의 적용성을 평가하기 위해 수치해석을 수행하였다. 해석결과, 지반에 설치된 파일이 강체거동을 하는 경우는 파일 선단부와 암반층 위치 따라 파일 보강지반 지지력이 달라지나, 연성거동을 하는 경우는 파일 선단부와 암반층의 위치보다 파일강성과 관련한 파일 설치길이와 파일 근입길이에 따라 지지력이 달라지는 것으로 나타났다.

Development of Bio-ballistic Device for Laser Ablation-induced Drug Delivery

  • Choi, Ji-Hee;Gojani, Ardian B.;Lee, Hyun-Hee;Jeung, In-Seuk;Yoh, Jack J.
    • International Journal of Precision Engineering and Manufacturing
    • /
    • 제9권3호
    • /
    • pp.68-71
    • /
    • 2008
  • Transdermal and topical drug delivery with minimal tissue damage has been an area of vigorous research for a number of years. Our research team has initiated the development of an effective method for delivering drug particles across the skin (transdermal) for systemic circulation, and to localized (topical) areas. The device consists of a micro particle acceleration system based on laser ablation that can be integrated with endoscopic surgical techniques. A layer of micro particles is deposited on the surface of a thin metal foil. The rear side of the foil is irradiated with a laser beam, which generates a shockwave that travels through the foil. When the shockwave reaches the end of the foil, it is reflected as an expansion wave and causes instantaneous deformation of the foil in the opposite direction. Due to this sudden deformation, the microparticles are ejected from the foil at very high speeds, and therefore have sufficient momentum to penetrate soft body tissues. We have demonstrated this by successfully delivering cobalt particles $3\;{\mu}m$ in diameter into gelatin models that represent soft tissue with remarkable penetration depth.

국내산 목재의 연륜경사에 따른 전단강도 및 나사못 유지력 영향 (Effect of the Withdrawal Strength of Wood Screws in Domestic Wood by Shear Strength with Different Growth Ring Orientation)

  • 차재경
    • Journal of the Korean Wood Science and Technology
    • /
    • 제40권6호
    • /
    • pp.363-369
    • /
    • 2012
  • 연륜경사에 따른 전단강도 실험이 국내에서 생산되는 목재에 대해 실시됐다. 연륜경사는 전단강도에 영향했고, 경사진 연륜에서 최대였다. 전단강도는 나사못 유지력을 예측하기 위한 식에 포함됐다. 나사못 유지력의 예측식은 No. 8 나사못의 실험결과와 비교하여 25 mm와 30 mm 길이에서 8% 이내로 작게 예측되었으나 18 mm와 38 mm에서는 큰 값을 보였다. 전단강도를 사용한 나사못 유지력의 예측값과 실험값 사이에는 연륜경사에 따라 큰 차이를 보이지 않았다.