• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.14 no.6
• /
• pp.713-728
• /
• 1989

In this paper, 16-QAM and 49-QPR systems utilized the raised cosine filter instead of LPF with the rectangular frequency characteristics as limiting channel bandwidth are implemented to measure their performances and effects of ISI. With the use of the raised cosine filter, and increase in SNR immunity can be obtained for specified spectrally efficient applications. Examination of the measured results reveals that the bandwidthe efficiency of 49-QPR implement is improved by about 8% and 15% higher than those of 16-QAM implement with the raised cosine characteristics having roll-off factor, a=0.5 and a=1, respectively. Also, equations for eye diagrams and error probability of 49-QPR system with AWGN and ISI are derived to analyze its performance and compared with the case of 16-QAM system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.9
• /
• pp.1782-1792
• /
• 1994

Ti : $LiNbO_3$ traveling-wave phase optical modulators at wavelength 1.3㎛ have been designed and fabricated, focusing on the optical waveguide and asymmetric coplanar electrode structure. To improve the phase-mismatch of traveling-wave ACPS electrode, the characteristic impedance, effective microwave index, and electrode loss have been presented as a function of geometric parameters including electrode and buffer layer thickness. Low-loss channel optical waveguides on $LiNbO_3$ were fabricated by the Ti diffusion method with $O_2$ water-vapor environment. $2.5{\mu}m$ thick electrode was successfully fabricated by double-spin image reversal process. Modulation bandwidth was limited by a resonance at 2.9 GHz and modulation bandwidth up to 2.5GHz was approxirnately measured.

• Journal of the Institute of Convergence Signal Processing
• /
• v.3 no.2
• /
• pp.58-63
• /
• 2002

One of the important problems of OFDM system is the large PAPR of the output signal, which can result the significant signal distortion in presence of nonlinear amplifiers. To reduce the PAPR, we use fundamentally the level clipping and propose the modified mapping/demapping method for effective reducing the PAPR of the OFDM signals with level clipping. We can significantly improve the BER performance characteristics for the OFDM system. We discussed, through extensive computer simulations, the effects of level clipping and modified mapping/demapping method on the performance of OFDM system including the trade off between bandwidth expansion and BER performance and between bandwidth efficiency and BER performance.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.3 s.118
• /
• pp.315-322
• /
• 2007

In this paper, active integrated antenna with left hand circular polarization(LHCP) for a transmitter of UHF RFID reader has been described. A novel rectangular ring patch as a radiator of the active antenna is proposed for easier impedance matching, smaller patch size, and LHCP characteristics. An amplification circuit is placed in the opening area of the radiator and is combined with it to work as oscillating circuit around 915 MHz. From the test results, impedance bandwidth of 29 MHz, 3 dB axial ratio bandwidth of 20 MHz, 3 dB beamwidth of 85 degree, and effective radiation power of 8.8 dBm have been obtained.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.05a
• /
• pp.77-81
• /
• 2006

We report the performance of a four-element, 11.67 GHz, high-Tc superconducting (HTS) microstrip antenna array with corporate feed network and circular polarization for direct broadcasting satellite (DBS) system. Our array antennas were designed and built on a 0.5 mm thick MgO substrate. To compare the superconducting antennas with normal conducting counterpart, One antenna pattern was fabricated from gold thin film, and a second pattern was fabricated from $YBa_2Cu_3O_{7-x}$ (YBCO) superconducting thin film. To improve the axial ratio of circularly polarized arrays, sequential rotation technique were used. Efficiency, radiation pattern, return loss and bandwidth were measured for both antennas at room temperature and at cryogenic temperature. The array produced good circular polarization, and the gain of the array at 77 K, relative to a copper array at room temperature was approximately 1.54 dB. The measured return loss of our HTS antenna array was 35.79 dB at the resonant frequency of 11.67 GHz and The total effective bandwidth was about 3.4 %. The results showed that high-temperature superconductors, when used in microstrip arrays, improved the efficiency of the HTS antenna array for circularly polarization.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.21 no.1
• /
• pp.115-123
• /
• 2018

In this paper, we consider the applicability of time-hopping(TH) systems for anti-jamming(AJ) communication. We first briefly summarize fundamentals of TH systems and several common jamming scenarios that have been considered in the literature. We then analyze the AJ performance of TH systems under those common jamming environments. From our simulation results, we reveal that among narrow band, partial band, broadband, and sweep jamming, partial band and sweep jamming are the best ones from jammer perspective. For the partial band jamming case, we show that the most effective bandwidth ratio and location are 50 % and 2.5-3.5 Ghz, respectively. For the sweep jamming case, we illustrate that the AJ performance of the TH system is enhanced when the sweep duration approaches to the bit duration. In addition, we pointed out that the most efficient jamming bandwidth ratio is 1/2. Finally, our results show that the TH-BPSK system greatly outperforms the TH-PPM counterpart.

• The Journal of the Acoustical Society of Korea
• /
• v.20 no.2
• /
• pp.86-92
• /
• 2001

Various array processing techniques to identify the noise source position or bearing have been developed. Typical array processing techniques which are based on time delay between received signals at two sensors, are classified as conventional beamforming, correlation function and NAH (Near-Field Acoustic Holography) techniques which have their own characteristics with respect to application field and signal processing method. In this study, correlation function technique which could be applied for broadband noise source detection, is adopted and the effective detection technique is proposed considering the effects of source bandwidth and measurement noise correlation of noise sources. The validity of the Proposed technique is evaluated using the 3-dimensional nonlinear any which does not give 3-dimensional Position or bearing ambiguity

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.10 s.89
• /
• pp.996-1004
• /
• 2004

1-Dimensional Cluster-Based Sequence Equalizer(1-D CBSE) lessens computational load, compared with the classic maximum likelihood sequence estimation(MLSE) equalizers, and has the superiority in the nonlinear channels. In this paper, we proposed an algorithm of searching for optimal training sequence that estimates the cluster centers instead of time-varying multipath fading channel estimation. The proposed equalizer not only resolved the problems in 1-D CBSE but also improved the bandwidth efficiency using the shorten length of taming sequence to improve bandwidth efficiency. In experiments, the superiority of the new method is demonstrated by comparing conventional 1-D CBSE and related analysis.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.17 no.7
• /
• pp.776-781
• /
• 2004

We report the performance of a four-element, 11.67 GHz, $high-{T}_c$ superconducting (HTS) microstrip antenna array with corporate feed network. The HTS antenna array used in this work had a circular polarization for direct broadcasting satellite (DBS) system. Our array antennas were designed and built on a 0.5 mm thick MgO substrate. To compare the superconducting antennas with normal conducting counterpart, One antenna pattern was fabricated from gold thin film, and a second pattern was fabricated from ${YBa}_2{Cu}_3{O}_7-x(YBCO)$ superconducting thin film. To improve the axial ratio of circularly polarized arrays, sequential rotation technique were used. Efficiency, radiation pattern, return loss and bandwidth were measured for both antennas at cryogenic temperature and room temperature. The array produced good circular polarization, and the gain of the array at 77 K, relative to a copper array at room temperature was approximately 1.54 dB. The measured return loss of our HTS antenna array was 35.79 dB at the resonant frequency of 11.67 GHz and The total effective bandwidth was about 3.4 %. The results showed that high-temperature superconductors, when used in microstrip arrays, improved the efficiency of the HTS antenna array for circularly polarization.

• Journal of Information Processing Systems
• /
• v.14 no.3
• /
• pp.771-789
• /
• 2018

In heterogeneous wireless networks supporting multi-access services, selecting the best network from among the possible heterogeneous connections and providing seamless service during handover for a higher Quality of Services (QoSs) is a big challenge. Thus, we need an intelligent vertical handover (VHO) decision using suitable network parameters. In the conventional VHOs, various network parameters (i.e., signal strength, bandwidth, dropping probability, monetary cost of service, and power consumption) have been used to measure network status and select the preferred network. Because of various parameter features defined in each wireless/mobile network, the parameter conversion between different networks is required for a handover decision. Therefore, the handover process is highly complex and the selection of parameters is always an issue. In this paper, we present how to maximize network utilization as more than one target network exists during VHO. Also, we show how network parameters can be imbedded into IEEE 802.21-based signaling procedures to provide seamless connectivity during a handover. The network simulation showed that QoS-effective target network selection could be achieved by choosing the suitable parameters from Layers 1 and 2 in each candidate network.