• Journal of Mechanical Science and Technology
• /
• 제16권7호
• /
• pp.959-965
• /
• 2002

Effective hydraulic conductivity of a statistically anisotropic heterogeneous medium is obtained for steady two-dimensional flows employing stochastic analysis. Flow equations are solved up to second order and the effective conductivity is obtained in a semi-analytic form depending only on the spatial correlation function and the anisotropy ratio of the hydraulic conductivity field, hence becoming a true intrinsic property independent of the flow field. Results are obtained using a statistically anisotropic Gaussian correlation function where the anisotropy is defined as the ratio of integral scales normal and parallel to the mean flow direction. Second order results indicate that the effective conductivity of an anisotropic medium is greater than that of an isotropic one when the anisotropy ratio is less than one and vice versa. It is also found that the effective conductivity has upper and lower bounds of the arithmetic and the harmonic mean conductivities.

• Korea-Australia Rheology Journal
• /
• 제17권1호
• /
• pp.27-32
• /
• 2005

We determine the effective viscosity of suspensions with bidisperse particle size distribution by modifying an effective-medium theory that was proposed by Acrivos and Chang (1987) for monodisperse suspensions. The modified theory uses a simple model that captures some important effects of multi-particle hydrodynamic interactions. The modifications are described in detail in the present study. Estimations of effective viscosity by the modified theory are compared with the results of prior work for monodisperse and bidisperse suspensions. It is shown that the estimations agree very well with experimental or other calculated results up to approximately 0.45 of normalized particle volume fraction which is the ratio of volume faction to the maximum volume fraction of particles for bidisperse suspensions.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.1698-1703
• /
• 2004

To understand the high expansion effects by adopting intake closing time in the cases of compensating intake air-mass and effective compression ratio simultaneously, fundamental study was carried out by using RICEM realizing Atkinson cycle. Intake air-mass and effective compression ratio were compensated by increasing supercharged pressure and geometric compression ratio. The results showed that the increasing rates of expansion ratio and expansion-compression ratio were increased by compensating both a intake air-mass and effective compression ratio the same tendencies were obtained with the increases of compression ratio and cut off ratio It was also found that LIVC has more advantages in expansion ratio and effective work than those of EIVC under above conditions.

• 한국정밀공학회지
• /
• 제28권11호
• /
• pp.1288-1296
• /
• 2011

Effective elastic constants of bone-like biocomposites are investigated numerically. The bone-like materials are composed of strong layers and weak layers, and hierarchically structured. The unit cell model is employed to obtain the effective elastic constants. The effective anisotropic elastic constants of bone-like composites are obtained by using the potential energy method and finite element analysis. The effects of the Poisson's ratio, elastic modulus, hierarchical level, volume fraction and aspect ratio of the strong layer composed of the composites on the effective elastic constants are discussed.

• 한국자동차공학회논문집
• /
• 제11권1호
• /
• pp.179-184
• /
• 2003

It has been recognized that the compressibility of hydraulic fluid, which is characterized by the value of its bulk modulus, heavily affects on the system behavior and performance. In practice, the value of the oil bulk modulus varies by the operational and structural characteristics of the hydraulic system. This study presents the theoretical derivation of the effective bulk modulus and describes an experimental impulse technique that allows accurate measurement of oil effective bulk modulus with pressure variation in a hydraulic system. Experimental and analytical results show that the value of the effective bulk modulus varies a lot in low pressure region by the effect of entrained air, while the effective bulk modulus can be estimated just using the oil and container bulk modulus on the other high pressure region.

• 전자공학회논문지A
• /
• 제33A권10호
• /
• pp.40-47
• /
• 1996

A method for computing effectiv ebandwidth of aggregated varable bit rate (VBR) moving picture experts group (MPEG) video traffic is proposed. To compute statistical characteristics of aggregated MPEG traffic, first we split input MPEG traffic into I, B, and P frame traffics and aggregate respective I, B, and P frame traffics according to the frame type. Second statisticsal characteristics of the aggregated MPEG traffic are obtained using those of aggregated I, B, and P frame traffics. The effective bandwidth of the aggregated I frame traffic is computed by using the gaussian bound. Using the modified equivalent capacity, we obtain the effective bandwidths of aggregated B and P frame traffics and then compute the effective bandwidth of the combined B and P frame traffic. Finally the effective bandwidth of the aggregated MPEG traffic is computed by adding the gaussian bound of the aggregated I frame traffic and modifed equivalent capacity of combined B and P frame traffic. Computer simulation shows that the proposed method estimates effective bandwidth of the aggregated MPEG traffic well.

• 전자공학회논문지A
• /
• 제33A권7호
• /
• pp.223-229
• /
• 1996

a simpel coordinate transformaton method is suggested that converts Schr$\"{o}$dinger's equation involving a position-dependent effective mass in a heterostructure to an equation involving a positon-independent effective mass. This method enables the conceptual study of the effect of the positon-dependent effective mass inserted between the divergence operator and the gradient operator in Schr$\"{o}$dinger's equation. It is also shown that the characteristics such as a transmission coefficient in various heterostructures involving a position-dependent effective masses can be obtained iwth ease by the suggested method.

• 전자공학회논문지
• /
• 제50권1호
• /
• pp.117-123
• /
• 2013

본 논문은 symmetric balance incomplete block design(BIBD) code의 BER=$10^{-9}$을 만족하는 spectral efficiency를 구하였다. 이 계산 결과 effective power가 큰 경우 ($P_{sr}=-10$ dBm)는 m=2로 고정시키고 q값을 변화시키는 ideal BIBD code구성이 효율적이었다. 이와 반대로 effective power가 작은 경우 ($P_{sr}=-25$ dBm)는 ideal BIBD code 구성 보다는 q > 2인 값을 취하고 m값을 변화시키는 설계가 더 효율적임을 알 수 있었다.

• Journal of Mechanical Science and Technology
• /
• 제19권11호
• /
• pp.2025-2031
• /
• 2005

Eshelby type micro mechanics model with a newly developed piezoelectric Eshelby tensor is proposed for predicting the effective electroelastic properties of the piezoelectric composite. The model is applied for piezoelectric solids containing both porosities and metal inhomogeneities. The effective electroelastic moduli of the composites such as stiffness, piezoelectric constants, and dielectric constants are predicted by the present model, which are extensively compared with the existing experimental results from the literatures. The validity of Eshelby type model for predicting the effective properties of the composite is thoroughly examined. It can be concluded from this study that a new mechanism is needed to compute correctly the dielectric constants among the effective properties of the composites.

• Structural Engineering and Mechanics
• /
• 제50권2호
• /
• pp.163-180
• /
• 2014

Inaccurate predictions of effective stiffness for reinforced concrete (RC) columns having plain (undeformed) longitudinal rebars may lead to unsafe performance assessment and strengthening of existing deficient frames. Currently utilized effective stiffness models cover RC columns reinforced with deformed longitudinal rebars. A database of 47 RC columns (33 columns had continuous rebars and the remaining had spliced reinforcement) that were longitudinally reinforced with plain rebars was compiled from literature. The existing effective stiffness equations were found to overestimate the effective stiffness of columns with plain rebars for all levels of axial loads. A new approach that considers the contributions of flexure, shear and bond slip to column deflections prior to yielding was proposed. The new effective stiffness formulations were simplified without loss of generality for columns with and without lap-spliced plain rebars. In addition, the existing stiffness models for the columns with deformed rebars were improved while taking poor bond characteristics of plain rebars into account.