• 생물환경조절학회지
• /
• 제12권2호
• /
• pp.101-105
• /
• 2003

양파 plug묘 육묘시 일장조절에 의한 우량묘 생산을 위해 자연일장을 대비로 하여 11.5시간, 12.5시간 및 13.5시간의 일장 하에서 월륜과 창녕대고 품종을 200공 plug tray에 육묘한 후에 직경 16cm pot에 이식하여 16시간의 일장 하에서 재배하였다. 엽수, 엽초경, 초장 및 엽초장은 시기가 경과할수록 증가하였으나 13.5시간 일장에서의 초장과 엽초경은 일장처리 20일 후에는 감소하였다. 일장에 따른 생육은 엽수 및 엽초경은 장일조건에서 생육이 좋았으나 초장 및 엽초장은 장일에서 억제되는 경향을 나타내었다. 장일조건에서 육묘한 것일수록 이식 후에 구가 크고 비대도 빨랐다. 이상의 결과로 볼 때 육묘기간 중의 장일처리로서 도장의 억제 및 우량묘 생산의 가능성을 보여주고 있다.

• 대한기계학회논문집B
• /
• 제24권7호
• /
• pp.957-966
• /
• 2000

The effect of rotation on the discharge coefficient of orifices with various length-to-diameter ratios and two different inlet corner radii was studied. Length-to-diameter ratios of the orifices range from 0.2 to 10, while the inlet shapes are square edged, or round edges of radius-to-diameter ratio of 0.5. From the experiment, we found that rotational discharge coefficient and Rotation number, when based on ideal exit velocity of the orifice considering momentum transfer from the rotor, describe the effect of rotation very well. In this study, the discharge coefficients of rotating orifices are shown to behave similar to those of the well-known non-rotating orifices. For both rotating and non-rotating orifices, the discharge coefficients increase with the length-to-diameter ratio until a maximum is reached. The flow reattachments in the relatively short orifices are responsible for the increase. The coefficient then decreases with the length-to-diameter ratio due to the friction loss along the orifice bore. The length-to-diameter ratio that yields maximum discharge coefficient, however, increases with the Rotation number because the increased flow-approaching angle requires larger length-to-diameter ratio for complete reattachment. The length-to-diameter ratio for complete reattachment is shorter for round edged orifices than that of square edged orifices by about a unit length-to-diameter ratio.

• 한국의류산업학회지
• /
• 제15권4호
• /
• pp.504-513
• /
• 2013

This study evaluates the difference of visual effect according to pant style and geometric pattern. The researcher made 28 stimuli-combination of four pant Stiles (classic, baggy, skinny, and bell-bottom) and seven geometric pattern (large vertical stripe, small vertical stripe, large horizontal stripe, small horizontal stripe, large check, small check, and hound's tooth check). The test involved 96 female college students. The stimuli were made with the i-Designer computer program. The panels tested the computer screen images of all manikins wearing pants. A 7-point scale was used to evaluate each image. For the data analysis, ANOVA and Duncan-test were applied along with an SPSS program. The results of this study are as follows. Three factors (lower-body compensation, abdomen highlight, and length compensation) influenced the visual effect pant styles and geometric patterns. The skinny style and large vertical stripe evaluated positively in elongated height and leg length and a slimmer overall body. It was shown that the vertical stripe pattern was evaluated as more positive than the horizontal stripe pattern in the visual effect; particularly, the results showed distinct aspects in the classic pants style. The mutual influence of the visual effect (according to pants style and geometric pattern) were indicated as two factors of lower-body compensation and length compensation. A more positive visual effects resulted in a higher mutual influence on pant style and geometric pattern.

• PNF and Movement
• /
• 제16권2호
• /
• pp.267-273
• /
• 2018

Purpose: Leg length discrepancy (LLD) is one of the risk factors for postural imbalance. This study aimed to investigate the effect of induced leg length discrepancy on the limitation of stability (LOS) and static postural balance. Methods: Thirteen adults (males, 7; females 6) participated in this study. The LOS and static postural balance [sway length, sway area, and sway velocity of center of gravity (COG) displacement] were measured by the balance trainer system. The subjects were asked to move the COG for the anterior, posterior, and left and right directions maximally and to keep standing on the platform with and without induced LLD for 30 s in the open and closed eyes conditions, respectively. The LLD was artificially induced to 2 cm using insole. Wilcoxon test was used to compare the LOS and the static postural balance between with and without induced LLD. Results: The anterior and posterior LOS significantly decreased in induced LLD (p<0.05), and the left and right LOS were not significantly different between with and without LLD (p>0.05). Sway length, sway area, and sway velocity of the COG displacement significantly decreased in induced LLD (p<0.05). Conclusion: This study suggests that induced LLD could decease the antero-posterior LOS and increased the static postural balance. Therefore, the LLD could disturb the postural balance.

• 복식문화연구
• /
• 제11권4호
• /
• pp.459-473
• /
• 2003

The purpose of this study is to identify the effect of four clothing cues(hue, tone, skirt width, and skirt length of dress)on female impressions. The experimental materials developed for this study are a set of stimuli and response scales. The Stimuli are 40 color pictures manipulated with four clothing cues by drawing. The 7-point scale designed for visual evaluation of female impression formation includes 29 bipolar adjectives. The subjects were 240 undergraduate female students in Chinju city. The results of this study are as follow: As analyzing the impression of female figure by the hue, tone, skirt width, and length, five factors including ability. activity, elegance, attractiveness, concentration of attention, and tenderness were identified. Among these factors, ability·activity and elegance were proved to be more important. Some interaction effects of clothing cues were found. The combination of skirt width and tone had significant effects on ability. activity. Hue and tone of dress had significant effects on concentration of attention and tenderness. Skirt width and hue, and skirt length and hue had significant effects on the impression of attractiveness. Also skirt length and hue significant effects on concentration of attention.

• Smart Structures and Systems
• /
• 제17권4호
• /
• pp.577-591
• /
• 2016

In this study, the transfer length of 2400 MPa, seven-wire high-strength steel strands with a 15.2 mm diameter in pretensioned prestressed concrete (PSC) beams utilizing high strength concrete over 58 MPa at prestress release was evaluated experimentally. 32 specimens, which have the variables of concrete compressive strength, concrete cover depth, and the number of PS strands, were fabricated and corresponding transfer lengths were measured. The strands were released gradually by slowly reducing the pressure in the hydraulic stressing rams. The measured results of transfer length showed that the transfer length decreased as the concrete compressive strength and concrete cover depth increased. The number of strands had a very small effect, and the effect varied with both the concrete cover depth and concrete strength. The results were compared to current design codes and transfer lengths predicted by other researchers. The comparison results showed that the current transfer length prediction models in design codes may be conservatively used for 2400 MPa high-strength strands in high-strength concrete beams exceeding 58 MPa at prestress release.

• 산업경영시스템학회지
• /
• 제43권2호
• /
• pp.39-47
• /
• 2020

Postural stability can reduce the likelihood of critical slip and fall accidents in workplaces. The present study aimed to analyze the effect of shoes type on the ability of postural control during quiet standing. The effect of workload on the body balance was also of primary concern. Thirteen healthy male undergraduate students participated voluntarily in the experimental study. Standing on a force plate with wearing slippers, sports shoes, or safety shoes, two-axis coordinate on subjects' center of pressures (COP) was obtained in the two levels, rest and workload. For the workload level, subjects performed treadmill exercise to reach the predetermined level of physical workload. By converting the position coordinates of COPs, the postural sway length in both anterior-posterior (AP) axis and medio-lateral (ML) axis was assessed. ANOVA results showed that, in AP direction, wearing slippers significantly increased the postural sway length compared to wearing sports shoes or safety shoes. No significant difference in the mean sway length in AP axis was observed between sports shoes and safety shoes. In ML direction, both the workload and the shoes type did not significantly affect the mean length of postural sway. However, the postural sway length increased marginally with the slippers especially during the workload condition. This study explains wearing slippers may interfere with the ability of postural control during quiet standing. Physical workload decreases the ability of postural stability further.

• Journal of Ecology and Environment
• /
• 제45권4호
• /
• pp.182-189
• /
• 2021

Background: Organism body size is a basic characteristic in ecology; it is related to temperature according to temperature-size rule. Butterflies are affected in various aspects by climate change because they are sensitive to temperature. Therefore, this study was conducted to understand the effect of an increase in temperature due to global warming on the wing of butterflies. Results: A total of 671 butterflies belonging to 9 species were collected from 1990 to 2016 in Seoul (336 specimens) and Mokpo (335 specimens). Consequently, as the mean temperature increased, the wing length of the species increased. However, there are exceptions that the Parnassius stubbendorfii, Pieridae canidia, and Pieris rapae wing length of Seoul increased, but the butterfly wing length of Mokpo decreased. Conclusions: The positive correlations between the butterfly wing length and mean temperature showed that the change of mean temperature for about 26 years affects the wing length of butterfly species. The exception is deemed to have been influenced by the limited research environment, and further studies are needed. We would expect that it can be provided as basic data for studying effect of climate change.

• Steel and Composite Structures
• /
• 제43권5호
• /
• pp.553-564
• /
• 2022

Many existing reinforced concrete (RC) structures need to be strengthening for reason such as poor construction quality, low ductility or designing without considering seismic effects. One of the strengthening methods is strengthening technique with eccentrically braced frames (EBFs). The characteristic element of these systems is the link element and its length is very important in terms of seismic behavior. The link element of Y shaped EBF systems (YEBFs) is designed as a short shear element. Different limits are suggested in the literature for the link length. This study to aim experimentally investigate the effect of the link length for the suggested limits on the behavior of the RC frame system and efficiency of strengthening technique. For this purpose, a total of 5 single story, single span RC frame specimens were produced. The design of the RC frames was made considering seismic design deficiencies. Four of the produced specimens were strengthened and one of them remained as bare specimen. The steel YEBFs were used in strengthening the RC frame and the link was designed as a shear element that have different length with respect to suggested limits in literature. The length of links was determined as 50mm, 100mm, 150mm and 200mm. All of the specimens were tested under cyclic loads. The obtained results show that the strengthening technique improved the energy consumption and lateral load bearing capacities of the bare RC specimen. Moreover, it is concluded that the specimens YB-2 and YB-3 showed better performance than the other specimens, especially in energy consumption and ductility.

• Journal of Forest and Environmental Science
• /
• 제39권2호
• /
• pp.96-104
• /
• 2023

The successful restoration program requires a comprehensive understanding of variables influencing seedling efficiency. Below-ground is hypothesized to have a major impact on seedling performance of species when planted in agriculture, and degraded areas with different types of mulching. This study investigated on Sg. Terla Forest Reserve in Cameron Highlands Pahang, Malaysia. In this study randomized complete block design (RCBD) was used. The excavation method was applied to study the root system development, above, and below ground biomass distributions under different types of mulching: coconut mulching (CM), oil palm mulching (OM), plastic mulching (PM) and control (CK). The root diameter, main root length, lateral root length, root coiling, and root direction toward to sun were recorded. The results in this study indicate that mulching had significant effect on root diameter, main root length, and root distributions among treatments while for lateral root length, root: shoot ratio, dry biomass distributions, and above and below ground biomass did not showed significant effect among treatments. The highest values for root diameter, lateral root length, main root length, root distributions, dry biomass distributions and above and below ground biomass were showed in CM treatments. However 75% of root coiling was observed in seedlings between treatments.