• 한국생산제조학회지
• /
• 제7권3호
• /
• pp.126-131
• /
• 1998

In computer vision system of modern industry precise measuring has lots of dfficulties because of measurement error due to distortion phenomenon. Among the difficulties, the distortion of edge is regraded as a dominent problem. which is caused by the vlurred image. The blurred image apperar when camera can not discriminate its precise focus. So. it is very important to decide focus of lens and to develop algorithm in order to correct distortion phenomenon. Thus. discrimination criteria obtained by image information of precise focus must be fixed in advance. The gray level histogram of image acquired from blurred edge tends to show a uniform distribution. Bimodal intensity histogram is related with condition of focus, and it is possible to find good condition of focus by using bimodal histogram of entropy.

• 한국통신학회논문지
• /
• 제21권7호
• /
• pp.1677-1684
• /
• 1996

The theory of optimal stack filtering has been used in difference of estimates(DoE) approach to the detection of intensity edges in noisy image. In this approach, stack filters are applied to a noisy image to obtain local estimates of the dilated and eroded versions of the noise-free image. Thresholding the difference between these two estimates produces the estimated edge map. In this paper, the DoE approach is modified by imposing a symmetry condition of the data used to train the two stack filers. Under this condition, the stack filters obtained are duals of each other. Only one filter must therefore be trained;the other is simply its dual. They also produce statistially unbiased estimates. This new technique is called the symmetric Difference of Estimates (SDoE) approach.

• Advances in concrete construction
• /
• 제10권6호
• /
• pp.499-507
• /
• 2020

In current study, utilizing the Kelvin's theory with polynomial, exponential and trigonometric volume fraction laws for functionally graded cylindrical shell vibrations. Effects of different parameters for ratios of length- and height-to-radius and angular speed versus fundamental natural frequencies been determined for two categories of cylindrical shells with clamped-free edge condition. By increasing different value of height-to-radius ratio, the resulting backward and forward frequencies increase and frequencies decrease on increasing length-to-radius ratio. Moreover, on increasing the rotating speed, the backward frequencies increases and forward frequencies decreases. The frequencies are same when the cylinder is stationary. The frequencies increases and decreases on changing the constituent materials. The frequency results are verified with the earlier literature for the applicability of present model.

• 한국정밀공학회지
• /
• 제13권8호
• /
• pp.164-174
• /
• 1996

As tools for machining precision componants, end mills and ball end mills are widely used. For the end mills have longer cylindrical shape comparing dianeter, they are liable to deflect when machining and induce geometrical error and deterioration of surface roughness. To improve the stiffness and the sharpness of the cutting edge of end mill, a software for manufacturing end mills are developed. The program predicts the result of helical flute grinding and the configuration of cuting edge which is located in cylindrical surface. Furthermore to facilitate the manufacturing end mills using CNC grinding machine, the setting condition which satisfy the geometrical requirements like tool rake angle and stiffness are obtained.

• Current Research on Agriculture and Life Sciences
• /
• 제25권
• /
• pp.13-18
• /
• 2007

The aim of this research is to set improvement guidance a character analysis of woodland edge to cope with the ecological dysfunction of woodland which was caused by massive development project and thoughtless development in country areas. The summary of research result are as follows. 1) From the result of landscape ecology characteristic analysis of woodland in all seven research sites, to begin with, in proportion of appearance by vegetation layer and condition of composition, site 5 showed to be most satisfactory. 2) A width of woodland edge was revealed 7.5m as a minimum, 17.0m as a maximum, and 11.4m as a average and minimum edge was set as 10m according to integrated analysis on each example place. 3) As a result of flexibility analysis, site 1, 2 and 5 was shown high value 3, and it is thought that curve rather than linearity should be maintained in order to increase the ecological function. Also, a phenomenon of straight was prominent, and as a woodland edge, green network and buffering system showed to be somewhat unsatisfactory. 4) Based on the result of character analysis of landscape ecology, main guidelines for improvement of woodland edge were categorized into five in parallel structure and three in vertical structure respectively. The guidelines for improvement of woodland edge suggested by the research has a deep meaning in that it is used as a basic material to induce for controling more systematically or landscape-friendly the defamed forest problems caused by road construction, various development projects, and enlargement of agricultural lands.

• Wind and Structures
• /
• 제23권2호
• /
• pp.91-107
• /
• 2016

Flow-excited acoustic resonance in ducted cavities can produce high levels of acoustic pressure that may lead to severe damage. This occurs when the flow instability over the cavity mouth, which is created by the free shear layer separation at the upstream edge, is coupled with one of the acoustic modes in the accommodating enclosure. Acoustic resonance can cause high amplitude fluctuating acoustic loads in and near the cavity. Such acoustic loads could cause damage in sensitive applications such as aircraft weapon bays. Therefore, the suppression and mitigation of these resonances are very important. Much of the work done in the past focused on the fluid-dynamic oscillation mechanism or suppressing the resonance by altering the edge condition at the shear layer separation. However, the effect of the downstream edge has received much less attention. This paper considers the effect of the impingement edge geometry on the acoustic resonance excitation and Strouhal number values of the flow instabilities in a ducted shallow cavity with an aspect ratio of 1.0. Several edges, including chamfered edges with different angles and round edges with different radii, were investigated. In addition, some downstream edges that have never been studied before, such as saw-tooth edges, spanwise cylinders, higher and lower steps, and straight and delta spoilers, are investigated. The experiments are conducted in an open-loop wind tunnel that can generate flows with a Mach number up to 0.45. The study shows that when some edge geometries, such as lower steps, chamfered, round, and saw-tooth edges, are installed downstream, they demonstrate a promising reduction in the acoustic resonance. On the other hand, higher steps and straight spoilers resulted in intensifying the acoustic resonance. In addition, the effect of edge geometry on the Strouhal number is presented.

• Journal of applied mathematics & informatics
• /
• 제40권5_6호
• /
• pp.1089-1103
• /
• 2022

This paper focuses on the existence and uniqueness outcome for fractional integro-differential equation (FIDE) among impulsive edge condition and Hyers-Ulam-Rassias Stability (HURS) by using fractional calculus and some fixed point theorem in some weak conditions. The outcome procured in this paper upgrade and perpetuate some studied solutions.

• 대한조선학회논문집
• /
• 제30권3호
• /
• pp.41-50
• /
• 1993

본 논문은 2차원 수중익 주위의 유동해석을 위하여 포텐셜을 기저로한 여러가지 패널법을 비교 한다. 각 패널에서의 특이함수의 세기는 일정하거나 선형으로 변한다고 가정하고, Neumann 및 Dirichlet의 경계조건과 함께 혼합경계조건(Robin경계조건)을 적용하여 정식화를 한후, 각 방법의 정확도를 평가 하였다. 여러가지 2차원 단면에 대한 압력분포 및 양력을 계산하고, 해석해와 비교하였다. 날카로운 뒷날과 큰 캠버값을 갖는 날개의 경우에 특히 예민하다고 알려진 날개 뒷날 부근에서의 국소오차에 대하여 집중적인 연구를 수행하였다. 비교해석 결과, 혼합 경계조건을 사용하는 정식화 방법이 가장 정확성이 높고, 수렴속도도 우수함을 밝혔다.

• 한국전산구조공학회논문집
• /
• 제19권4호
• /
• pp.399-406
• /
• 2006

황동 개재물이 있는 Al 정사각판의 고유진동수는 혼합법칙을 이용하여 해석되었다. 혼합법칙에 의한 고유진동수는 개재물의 크기에 따른 유효 내평면 파동속도와 무차원 진동수 매개변수와의 곱으로 이루어진다. 해석모델은 외팔형, 2변 고정-2변 자유형, 3변 고정-1변 자유형 및 4변 고정형의 황동 개재물이 있는 4가지의 Al판이다. 자유단이 1개 이상 존재하는 경계조건에서 개재물이 판의 중앙에 위치하였을 때 개재물에 대한 판 전체의 면적비가 1/9 이하이면 혼합법칙 및 유한요소 해석에 의한 고유진동수는 10% 이내로 잘 일치하였다 4변 고정형 경계조건을 제외하고 3가지 경계조건에서 개재물이 판중앙에 있을 경우 개재물의 크기가 커짐에 따라 개재물이 있는 판의 고유진동수는 낮아짐을 알았다. 또한 개재물의 밀도가 판의 밀도보다 작을 때, 개재물 크기가 커짐에 따라 개재물이 있는 판의 고유진동수는 높아진다.

• Journal of Welding and Joining
• /
• 제16권5호
• /
• pp.134-141
• /
• 1998

In this study, a fillet size for bending fatigue strength of one side fillet welded T-joint, used in box type girder and other welding structure, was investigated by bending fatigue test with or without edge preparation and burn through, with variation of joint shape. As a result, the following conclusions were obtained. (1) In one side fillet welded T-joint, the larger the leg length, the greater the bending fatigue strength. The increase in bending fatigue strength. (2) One side filet welded T-joint with edge preparation showed higher bending fatigue strength than that with twofold-large leg length and without edge preparation. (3) In one side fillet welded T-joint without edge preparation, both manual welding and automatic welding were carried out with same condition. In this case, automatic welding shoed deeper penetration and more increased horizontal leg length than manual welding, so that automatic welding offers grater bending fatigue strength. (4) For one side fillet welded T-joint without edge preparation, the ratio(h/t) of the leg length (h) and the main plate thickness (t) in which toe crack can occur was 1.2 over. (5) In one side fillet welded T-joint with edge preparation, the burn through led to reduced bending fatigue strength. However, this bending fatigue strength was higher than that of one side fillet welded T-joint without edge preparation and with a larger leg length.